Coupling continuous ultrasound-assisted extraction, preconcentration and flame atomic absorption spectrometric detection for the determination of cadmium and lead in mussel samples

Continuous ultrasound-assisted extraction has been coupled with preconcentration and flame atomic absorption spectrometry for the determination of cadmium and lead in mussel samples. Experimental designs were used for the optimisation of the leaching and preconcentration steps. The use of diluted nitric acid as extractant in the continuous mode at a flow rate of 3.5 ml min⁻¹ and room temperature was sufficient for quantitative extraction of these trace metals. A minicolumn containing a chelating resin (Chelite P, with aminomethylphosphoric acid groups) was proved as an excellent material for the quantitative preconcentration of cadmium and lead prior to their flame atomic absorption detection. A flow injection manifold was used as interface for coupling the three analytical steps, which allowed the automation of the whole analytical process. A good precision of the whole procedure (2.0 and 2.3%), high enrichment factors (20.5 and 11.8) and a detection limit of 0.011 and 0.25 μg g⁻¹ for cadmium and lead, respectively, were obtained for 80 mg of sample. The sample throughputs were ca. 16 and 14 samples h⁻¹ for cadmium and lead, respectively. The accuracy of the analytical procedures was verified by using a standard reference material (BCR 278-R, mussel tissue) and the results were in good agreement with the certified values. The method was successfully applied to the determination of trace amounts of cadmium and lead in mussel samples from the coast of Galicia (NW, Spain).     

Blood cell separation using crosslinkable copolymers containing N,N‐dimethylacrylamide

Amphiphilic copolymers using hydrophilic N,N‐dimethylacrylamide (DMA), hydrophobic methyl methacrylate (MMA) and a crosslinkable monomer, 3‐methacryloyloxypropyl trimethoxysilane (MTSi), were synthesized and evaluated as coating materials for leukocyte removal filters for whole blood. When filters composed of non‐woven fabrics were coated with crosslinked synthesized copolymers, the elution ratios of the copolymers to water were adequately low because of the crosslinking with trimethoxysilane groups of MTSi units in the copolymers. Filters coated with crosslinked poly(DMA‐co‐MTSi) having a 0.96 mole fraction of DMA units showed a 0.35 ± 0.44% platelet permeation ratio and a logarithmic reduction of 4.0 ± 0.68 for leukocytes. On the other hand, an increase in the content of MMA units in the DMA‐containing copolymers improved the permeation ratio of the platelets dramatically. Filters coated with crosslinked poly(DMA‐co‐MMA‐co‐MTSi) containing a 0.39 mole fraction of MMA units and a 0.58 mole fraction of DMA units showed an 86 ± 3.0% platelet permeation ratio and a logarithmic reduction of 2.1 ± 1.2 for leukocytes. This indicates that an adequate content of hydrophobic monomer units, such as MMA units, is necessary for effective platelet permeation. Copyright © 2007 John Wiley & Sons, Ltd.     

On-line preconcentration and determination of nickel in natural water samples by flow injection-inductively coupled plasma optical emission spectrometry (FI-ICP-OES)

An on-line nickel preconcentration and determination system implemented with inductively coupled plasma optical emission spectrometry (ICP-OES) associated to flow injection (FI) was studied. Trace amounts of nickel were preconcentrated by sorption on a conical minicolumn packed with activated carbon (AC) at pH 5.0. The nickel was removed from the minicolumn with 20% nitric acid. An enrichment factor of 80-fold for a sample volume of 50 ml was obtained. The detection limit (DL) value for the preconcentration method proposed was 82 ng l⁻¹. The precision for ten replicate determinations at the 0.5 μg l⁻¹ Ni level was 3.0% relative standard deviation (R.S.D.), calculated from the peak heights obtained. The calibration graph preconcentration method for nickel was linear with a correlation coefficient of 0.9997 at levels near the detection limits (DL) up to at least 100 μg l⁻¹. The method was successfully applied to the determination of nickel in natural water samples.     

On the convergence of the LJ search method

The convergence of the Luus-Jaakola search method for unconstrained optimization problems is established.Notation E _n Euclideann-space - f Gradient off(x) - ² f Hessian matrix - (·) ^T Transpose of (·) - I Index set {1, 2, ...,n} - [x _i1 ^*(j) ] Point around which search is made in the (j + 1)th iteration, i.e., [x _1l ^*(j) ,x _2l ^*(j) ,...,x _n1 ^*(j) ] - r _i ⁽ⁱ⁾ Range ofx _il ^*(i) in the (j + 1)th iteration - l ₁ min_i {r _i ⁽⁰⁾ } - l ₂ min_i {r _i ⁽⁰⁾ } - A _j Region of search in thejth iteration, i.e., {x E _n:x _il ^*(j-1) –0.5r _i ^(j-1) x _ix _il ^*(j-1) +0.5r _i ^(j-1) ,i I} - S _j Closed sphere with center origin and radius _j - Reduction factor in each iteration - 1– - (·) Gamma function Many discussions with Dr. S. N. Iyer, Professor of Electrical Engineering, College of Engineering, Trivandrum, India, are gratefully acknowledged. The author has great pleasure to thank Dr. K. Surendran, Professor, Department of Electrical Engineering, P.S.G. College of Technology, Coimbatore, India, for suggesting this work.     

Nitrogen doped nano porous graphene as a sorbent for separation and preconcentration trace amounts of Pb,Cd and Cr by Ultrasonic assisted in‐syringe dispersive micro solid phase extraction

Nitrogen doped nano porous graphene was used as an efficient sorbent in solid‐phase extraction process for simultaneous separation and pre‐concentration of metal ions lead (II), cadmium(II), and chromium(III)) in biological samples. Ultrasonic assisted in‐syringe dispersive micro solid phase extraction coupled with micro sampling atomic absorption spectrometry was utilized for the determination of metal ions. Nitrogen doped nano porous graphene was synthesized as a nano sorbent by chemical vapour deposition method. Methane and aniline were used as carbon and nitrogen sources. The characterization of sorbent was performed by field emission scanning electron microscope, transmission electron microscopy, atomic force microscope, fourier transform infrared, chemical element analysis and raman analysis. Effective parameters on the extraction efficiency such as pH, sorbent dosage, eluent volume and eluent concentration were optimized by central composite design and desirability function. Experimental results indicate that the optimal conditions for this extraction were pH = 6.4, 1.42 mg of sorbent, 100 μL of eluent, and 0.84 mol L^‐1 of eluent concentration. The detection limits are as low as 1.5, 0.3 and 0.9 μg L^‐1 for lead, cadmium, and chromium, respectively. The intra‐day precisions were 3.6, 4.38 and 2.94 and Inter‐day precision were 4.83, 5.26 and 4.52 for lead, cadmium, and chromium, respectively. Method performance was investigated by determination of mentioned heavy metals in complicated biological matrixes such as human plasma, urine and saliva samples with good recoveries.     

Labelling and Fractionating of Black Mamba Venom using 131I and Gel-Filtration Technique

Separation of Black Mamba (Dendroaspis polylepis) venom into three fractions was achieved by the use of Sephadex G-100 filtration method. The first and highest peak of the three separated bands proved to be the lethally toxic. Labelling the venom with nascent¹³¹ I prior to fractionating facilitated the detection and the evaluation of three well resoluted fractions. Comparative separation of non-labelled venom was also carried out side by side with the labelled one to study the advantage of radioactivity on extinction measurements.     

Radiotracer Investigation of the Copper Ore Concentration Process

One of the most difficult operations for control and identification in copper ore concentration process is grain classification in hydrocyclone batteries. In the paper radiotracer investigations of the classification process immediately give values of hydrocyclones parameters with higher accuracy than obtained from conventional methods. Presented paper includes the results of the investigation which was carried out in “Lubin” Copper Mine in Poland.     

Application of Ni(II)-imprinted cross-linked poly(methacrylic acid) synthesised through double-imprinting method for the on-line preconcentration of Ni(II) ions in aqueous media

The present paper describes the feasibility of on-line preconcentration of nickel ions from aqueous medium on Ni(II)-imprinted cross-linked poly(methacrylic acid) (IIP) synthesised through a double-imprinting method and their subsequent determination by FAAS. The proposed method consisted in loading the sample (20.0 mL, pH 7.25) through a mini-column packed with 50 mg of the IIP for 2 min. The elution step was performed with 1.0 mol L^?1 HNO₃ at a flow rate of 7.0 mL min^?1. The following parameters were obtained: quantification limit (QL) – 3.74 µg L^?1, preconcentration factor (PF) – 36, consumption index (CI) – 0.55 mL, concentration efficiency (CE) – 18 min^?1, and sample throughput – 25 h^?1. The precision of the procedure assessed in terms of repeatability for ten determinations was 5.6% and 2.5% for respective concentrations of 5.0 and 110.0 µg L^?1. Moreover, the analytical curve was obtained in the range of 5.0–180.0 µg L^?1 (r = 0.9973), and a 1.64-fold increase in the method sensitivity was observed when compared with the analytical curve constructed for the NIP (non-imprinted polymer), thus suggesting a synergistic effect of the Ni(II) ions and CTAB on the adsorption properties of the IIP. The practical application of the adsorbent was evaluated from an analysis of tap, mineral, lake and river water. Considering the results of addition and recovery experiments (90.2–100 %), the efficiency of this adsorbent can be ensured for the interference-free preconcentration of the Ni(II) ions.     

Preliminary Investigation of the Effect of Select Pollutants on Marine Phytoplankton Using Multidimensional Fluorescence Measurements

Abstract

The use of multidimensional fluorescence for detecting the effects of select pollutants on algal fluorescence and production is demonstrated. Multidimensional fluorescence is ideally suited to rapidly measure algal fluorescence generated by both chlorophyll a and accessory pigments, as well as any changes induced by pollutants. Laboratory cultured and natural algae samples from classes Chlorophyceae, Bacillariophyceae, and Cyanophyceae were exposed to substituted nitroaromatics and fluorescence spectra of the algae recorded. Notable spectroscopic changes and fluorescence quenching were observed. In addition, a novel method for rapidly preconcentrating dilute natural marine samples is described.     

Off-Line and On-Line Preconcentration Techniques for the Determination of Phenylureas in Freshwaters

Abstract

Phenylurea herbicides are analysed by reversed-phase liquid chromatography using UV detection at 244 nm after a concentration step in order to determine ppb or sub-ppb levels in drinking and river waters. With an average UV detection limit of 5 ng, a 500 ml sample volume is necessary to reach the 10 ppt level for spiked LC grade water samples and enables easy determination of concentrations below the ppb level for river water samples. Off-line and on-line methods are compared for the concentration step. Off-line concentration consists in a liquid sorption on n-octadecyl silica (C18) and elution by a suitable organic solvent. Polar phenylureas have low retention volumes on C18 silica and consequently the length of the concentration column has to be 10 cm to concentrate them at the ppb level from 100 ml of water and longer for lower levels of detection. Nevertheless, we show that increasing the size of the concentration column does not improve the limits of detection because of the numerous interferences also concentrated when percolating high volumes of water. On-line technology can be used only with short precolumns and requires a sorbent with a great retention for phenylureas. The copolymer-based PRP-1 is found to be an excellent sorbent and it is then possible to apply on-line precolumn technology with preconcentration through two precolumns (10 × 21 mm ID) in series, the first one being packed with C18 silica and the other with the PRP-1 polymer. Interfering compounds are then trapped onto the first precolumn acting as a filter and common phenylurea-breakthrough volumes on the PRP-1 precolumn are higher than 500 ml. Knowing the amounts preconcentrated on both precolumns and using UV and electrochemical detection help the identification of phenylureas in river water.