2,3-Anhydrosugars in glycoside bond synthesis. Application to the preparation of C-2 functionalized α-d-arabinofuranosides

A novel two-step route has been developed for the synthesis of a panel of oligosaccharides (9-17) containing C-2 functionalized α-d-arabinofuranosyl residues. The first step in this route consists of a highly stereocontrolled glycosylation reaction using a 2,3-anhydrosugar thioglycoside (6). In the second step, the epoxide ring in the 2,3-anhydrosugar glycoside is regioselectively opened at C-2 with sodium methoxide and sodium azide thus providing products with the α-d-arabinofuranosyl stereochemistry. This approach to these targets circumvents the potential stereocontrol problems inherent in glycosylations with arabinofuranosyl donors possessing non-participating groups at C-2. The route is also highly convergent, allowing the preparation of a range of C-2′ and C-2″ modified oligosaccharides upon reaction of epoxy glycosides 27-29 with nucleophiles.     

A fluorous-assisted synthesis of oligosaccharides using a phenyl ether linker as a safety-catch linker

We report on the fluorous-assisted synthesis of oligosaccharides using a phenyl ether linker. The phenyl ether linker is stable under both acidic and basic conditions but can be cleaved under mildly acidic conditions after reduction to a vinyl ether. The utility of the method was demonstrated by the synthesis of a trisaccharide. A protected trisaccharide with a light-fluorous tag was directly prepared by one-pot glycosylation using three building blocks that contained a building block with a light-fluorous tag though a phenyl ether. A Birch reduction of the trisaccharide provided a fully deprotected trisaccharide with the fluorous tag attached through a vinyl ether, which was easily purified by solid-phase extraction. The tag was cleaved from the sugar portion by treatment with 3% TFA in MeOH.     

Evaluation of different operation modes of high performance liquid chromatography for the analysis of complex mixtures of neutral oligosaccharides

Chromatographic methods based on different HPLC operation modes, reverse phase (RP), high performance anion exchange chromatography (HPAEC), graphitized carbon chromatography (GCC) and hydrophilic interaction liquid chromatography (HILIC), have been developed and compared for the analysis of complex mixtures of neutral oligosaccharides with functional properties. Whereas GCC gave the best chromatographic separation of isomeric oligosaccharides with the same molecular weight (R(s) values in the range 1.0-4.0 and 2.4-5.6 for tetra- and pentasaccharides, respectively), HILIC provided the best results for mixtures including oligosaccharides of different degrees of polymerization (R(s) values of maltooligosaccharides between 3.4 and 6.2). Validation of the HILIC LC-MS method proved its utility for the analysis of oligosaccharide mixtures with functional properties: relative standard deviations lower than 10%, LOD's and LOQ's in the range 12.7-130.2 ng mL(-1) and 39.3-402.2 ng mL(-1), respectively, and linearity up to 10-20 μg mL(-1). Quantitative data for fructooligosaccharides, gentiooligosaccharides and dextransucrase cellobiose acceptor oligosaccharides were obtained by using this method.     

Synthesis of Two Tetrasaccharides Related to the O-Antigen from Azospirillum brasilense S17 and Azospirillum lipoferum SR65

Synthesis of two isomeric tetrasaccharides, β-D-Glup-(1→2)-α-L-Rhap-(1→3)-α-L- Rhap-(1→2)-α-L-Rhap (I) and β-D-Glup-(1→3)-α-L-Rhap-(1→3)-α-L-Rhap-(1→3)-α-L-Rhap (II), the repeating units from the lipopolysaccharides of the nitrogen-fixing bacterium Azospirillum brasilense S17 and Azospirillum lipoferum SR65, was achieved via assembly of the building blocks 2,3,4,6-tetra-O-acetyl-β-D-glucopyranosyl trichloroacetimidate (2), p-methoxyphenyl 3,4-di-O-benzoyl-α-L-rhamnopyranoside (3), 3-O-allyloxycarbonyl-2,4-di-O-benzoyl-α-L-rhamnopyranosyl trichloroacetimidate (6), 2,3,4,6-tetra-O-benzoyl-β-D-glucopyranosyl trichloroacetimidate (8), and p-methoxy phenyl 2,4-di-O-benzoyl-α-L-rhamnopyranoside (14). Condensation of 3 with 6 or 8 provided the disaccharides 9 or 11, respectively. Deallyloxycarbonylation of 11 gave the disaccharide aceptor 12, while removal of the p-methoxyphenyl group in 9 followed by trichloroacetimidation of the anomeric hydroxyl group afforded the disaccharide donor 10. Meanwhile, disaccharide donor 16 and acceptor 18 were prepared from 6, 8, and 14 similarly. Finally, condensation of 10 with 12 or 16 with 18, followed by deprotection, gave the target tetrasaccharides I or II, respectively.     

Introducing porous graphitized carbon liquid chromatography with evaporative light scattering and mass spectrometry detection into cell wall oligosaccharide analysis

Separation and characterization of complex mixtures of oligosaccharides is quite difficult and, depending on elution conditions, structural information is often lost. Therefore, the use of a porous-graphitized-carbon (PGC)-HPLC-ELSD-MSⁿ-method as analytical tool for the analysis of oligosaccharides derived from plant cell wall polysaccharides has been investigated. It is demonstrated that PGC-HPLC can be widely used for neutral and acidic oligosaccharides derived from cell wall polysaccharides. Furthermore, it is a non-modifying technique that enables the characterization of cell wall oligosaccharides carrying, e.g. acetyl groups and methylesters. Neutral oligosaccharides are separated based on their size as well as on their type of linkage and resulting 3D-structure. Series of the planar β-(1,4)-xylo- and β-(1,4)-gluco-oligosaccharides are retained much more by the PGC material than the series of β-(1,4)-galacto-, β-(1,4)-manno- and α-(1,4)-gluco-oligosaccharides. Charged oligomers such as α-(1,4)-galacturonic acid oligosaccharides are strongly retained and are eluted only after addition of trifluoroacetic acid depending on their net charge. Online-MS-coupling using a 1:1 splitter enables quantitative detection of ELSD as well as simple identification of many oligosaccharides, even when separation of oligosaccharides within a complex mixture is not complete. Consequently, PGC-HPLC-separation in combination with MS-detection gives a powerful tool to identify a wide range of neutral and acidic oligosaccharides derived from various cell wall polysaccharides.     

Differently complex oligosaccharides can be easily identified by matrix-assisted laser desorption and ionization time-of-flight mass spectrometry directly from a standard thin-layer chromatography plate

Thin-layer chromatography (TLC) is a simple, fast and inexpensive separation method. Unambiguous identification of the TLC spots is, however, often a problem. Here we show for the first time that oligosaccharides (derived from dextran, alginate, hyaluronan and chondroitin sulfate) can be characterized by matrix-assisted laser desorption and ionization time-of-flight (MALDI-TOF) mass spectrometry (MS) directly on a TLC plate. The applied oligosaccharides were either commercially available or obtained from the polysaccharides by HCl-induced hydrolysis. Normal phase TLC was followed by MALDI-TOF MS subsequent to matrix deposition. It will be shown that high quality mass spectra can be obtained that enable unequivocal assignments. It will also be shown that the high content of formic acid in the solvent system does not confer major problems but is responsible for the partial formylation of the analyte and minor N-acetyl loss from hyaluronan and chondroitin sulfate.     

Hydrophilic interaction liquid chromatography for the separation,purification, and quantification of raffinose family oligosaccharides from Lycopus lucidus Turcz

A systematic strategy based on hydrophilic interaction liquid chromatography was developed for the separation, purification and quantification of raffinose family oligosaccharides from Lycopus lucidus Turcz. Methods with enough hydrophilicity and selectivity were utilized to resolve the problems encountered in the separation of oligosaccharides such as low retention, low resolution and poor solubility. The raffinose family oligosaccharides in L. lucidus Turcz. were isolated using solid‐phase extraction followed by hydrophilic interaction liquid chromatography at semi‐preparative scale to obtain standards of stachyose, verbascose and ajugose. Utilizing the obtained oligosaccharides as standards, a quantitative determination method was developed, validated and applied for the content determination of raffinose family oligosaccharides both in the aerial and root parts of L. lucidus Turcz. There were no oligosaccharides in the aerial parts, while in the root parts, the total content was 686.5 mg/g with the average distribution: raffinose 66.5 mg/g, stachyose 289.0 mg/g, verbascose 212.4 mg/g, and ajugose 118.6 mg/g. The result provided the potential of roots of L. lucidus Turcz. as new raffinose family oligosaccharides sources for functional food. Moreover, since the present systematic strategy is efficient, sensitive and robust, separation, purification and quantification of oligosaccharides by hydrophilic interaction liquid chromatography seems to be possible.     

Ultrafast analysis of oligosaccharides on microchip with light-emitting diode confocal fluorescence detection

We have developed a new method for the high-speed separation and high-sensitivity detection of complex oligosaccharides based on microchip electrophoresis (nu-CE) with light-emitting diode (LED) confocal fluorescence detection. Oligosaccharides labeled with 8-aminopyrene-1,3,6-trisulfonate (APTS) were found to strongly adsorb to the surface of polymethylmethacrylate (PMMA) microchips. Accordingly, three classes of major dynamic coating additives were systematically investigated, and cellulose derivatives were found to specifically suppress such adsorption and allow high-performance separation on PMMA chips. Additive concentration, buffer pH and applied field strength were found to be key factors in the high-performance separation& of APTS-labeled oligosaccharides on PMMA chips. Under optimal conditions, 15 oligosaccharides in dextrin hydrolysate can be separated within 45 s with an electrophoretic separation efficiency of over 400 000 theoretical plates per meter. The relative standard deviation (RSD) values of migration times of fourteen oligosaccharides were less than 0.50% between six different channels, and the detection limit for APTS-labeled glucose was about 1.98 x 10(-8) mol/L or 8.61 amol with a signal-to-noise ratio (S/N) of 3. The high speed, high efficiency and high sensitivity of this micro-CE-based method indicate that it can be widely applied to analysis of complex oligosaccharides.     

Analysis of carbohydrates by HPLC with post-column derivatization

Post-column derivatization of oligosaccharides after HPLC separation with a variety of systems has been achieved either by reaction with thymol in concentrated sulfuric acid or after hydrolysis of saccharides with hydrochloric acid and derivatization of the resulting monosaccharides with p-aminobenzoic acid hydrazide. With both reactions the detection of reducing and non-reducing sugars is possible even at trace levels. The latter reaction, despite the two reaction steps required, is much more convenient and practical, whereas with the first reaction it is also possible to determine alkylpolyglucosides.     

Efficient stereoselective synthesis of oligosaccharides of Streptococcus pneumoniae serotypes 6A and 6B containing multiple 1,2-cis glycosidic linkages

The synthesis of the repeating units of pneumococcal polysaccharide serotypes 6A and 6B and derivatives thereof is described. Application of S-benzoxazolyl and S-thiazolinyl glycosides allowed rapid oligosaccharide assembly and provided complete stereoselectivity in challenging 1,2-cis glucosylations and galactosylations. The oligosaccharide assembly was accomplished in an efficient manner by selective activation of thioimidoyl leaving groups over thioglycosides.