PEG‐4000‐promoted palladium‐catalyzed N‐allylation in water: aminonaphthalene as an example

An environmentally friendly, efficient catalytic process using palladium associated with ligands in a PEG4000–water system leading to N‐allylation was described in this study. PEG‐4000 was found to improve the palladium‐catalyzed allylic amination of allylic acetates with aminonaphthalenes and gave overall good to high yields of the corresponding N‐allylic aminonaphthalenes. Copyright © 2012 John Wiley & Sons, Ltd.     

聚合物对非离子十二烷基聚氧乙烯聚氧丙烯醚浊点的影响

测定了水溶性高分子聚乙二醇（PEG1000、PEG2000、PEG6000）和聚乙烯吡咯烷酮（PVP－K30、PVP－K90）对三种非离子表面活性剂十二烷基聚氧乙烯聚氧丙烯醚C12H25O（EO ）m(PO)nH(LS36,m=3,n=6,LS45,m=4,n=5;LS54,m=5,n=4)浊点的影响。结果表明,聚乙二醇（PEG） 可使三种表面活性剂水溶液浊点降低;而聚乙烯吡咯烷酮（PVP）随其浓度增加,表面活性剂溶液浊点先升高然后又下降;浊点下降程度与聚合物浓度和分子量有关。     

Cubic equations of state for adsorption layer: alkylthiopolyoxyethylene glycols

The van der Waals, Redlich-Kwong, Peng-Robinson and an equation of state derived by Smith were applied to approximate the run of surface pressure () — area () curves of the adsorption layer ofn-pentyl ton-octyl thioethers of tri- and tetraoxyethylene glycols. The equation parameters: excluded molar area (_oi) and an interaction energy term (a _i) were determined by simplex method for values in the range of 2–23.5 mN/m. The equations parameters were found to be related to the structure of the amphiphile. The _oi decreased with the length of hydrocarbon thioether chain and was nearly uniform for equations of state in question except for Smith equation. The value ofa _i was dependent on the amphiphile structure. It was used to obtain the interaction energy _i between amphiphiles in the adsorption layer. The values of _i determined as an increment per methylene group was in the range of ca. 0.2–0.32R*T, depending on the equation of state used.     

The Synthesis and the Cationic Fluorescence Role of Glycols with Aromatic End Groups, Part III

Some novel bis-(substituted-phenoxy) ended glycols were synthesised usinghydroxy aromatics of vanillin, o-vanillin, iso-vanillin and 4-hydroxy coumarin which reacted with bis-dihalides of polyglycols in the presence ofDMSO/alkali carbonate. The novel podands, Ar-(CH₂CH₂O)_m-Ar,(m = 1–4), were identified with IR, ¹H-NMR, ¹³C-NMR and mass spectrometry. The various (formyl-methoxy)phenyl and 4-oxycoumarin derivatives of glycols were studied to estimate the cation binding selectivity of SCN^- salts ofLi⁺, Na⁺, K⁺ and Zn²⁺ cations in acetonitrile using steady statefluorescence spectroscopy. The relevant structures of podands have shown goodselectivity depending on the cation and the glycollength, although the chromophoreend groups have no specific contribution on binding.     

Recent advances with association models for practical applications

ABSTRACT

Association models like Cubic Plus Association (CPA) equation of state and other Statistical Associating Fluid Theory variants have found widespread use, especially over the recent 30 or so years, and this is not limited anymore to universities and researchers. Industry is beginning slowly to adopt such models for some applications and a few of the association models are now provided by commercial simulators. Association models account explicitly for hydrogen bonding (and other complex) phenomena, and for this reason, they are potentially more useful and more successful than traditional models like cubic equations of state and activity coefficient models. Still, for practical applications, all models are judged by their results and these depend on the availability of experimental data, the number and type of adjustable parameters and the performance of the models for phase equilibria and occasionally also for other properties. We will consider four case studies in this work which, will illustrate some of the capabilities and limitations of these association models in different applications. We will offer a ‘model developer’s’ point of view showing in several cases all stages of model development in order to illustrate what worked, what did not and how it was corrected (when possible). The ‘physics’ and ‘application’ aspects of the models will be in all cases discussed. All results will be shown with the CPA equation of state, although we expect that the overall conclusions will be the same for a wide range of association models.     

Apparent Specific Polarization and Dipole Moment of Some Poly(oxyethylene) Glycols in 1,4-Dioxane and Benzene Solutions at 298.15 K

Summary. The electrical permittivity of 1,4-dioxane and benzene solutions of some poly(oxyethylene) glycols up to the average molecular weight of 1590 were measured at 298.15 K. From the experimental data the limiting apparent specific polarization and partial molar polarization were calculated. The electrical dipole moment of the investigated solutes was estimated according to the Debye, Onsager, and Kirkwood theoretical approaches. The calculated dipole moments increase linearly with the square root of the number of monomeric units. The group dipole moment of the polar monomeric unit was calculated from the corresponding limiting partial molar volume, the refraction and polarization of the solute. The factor g, which takes into account the degree of flexibility of the chain, was estimated and found to be greater than 0.92, which means that the lower members of the poly(oxyethylene) glycols possess almost free rotation within the chain backbone of polymer.     

Thermodynamic Properties of CTAB in Aqueous Solutions of Neutral Polymers at 25°C

Interactions of polyethylene glycols (PEGs) and polypropylene glycols (PPOs) in aqueous solutions of hexadecyltrimethylammonium bromide (CTAB) were investigated through thermodynamic properties at 25°C. The densities and heat capacities of the solutions were measured with a vibrating tube densimeter and a Picker flow microcalorimeter, respectively. The variations in the apparent molar volumes and heat capacities of both solutes, calculated from the densities and heat capacities of the solutions, are unusually large in the vicinity of the CMC, reflecting the existence of very strong interactions between CTAB and PPOs. With the more hydrophilic polymers, PEGs, the apparent properties of CTAB are less affected by the presence of the polymer, indicating that PEGs interact only weakly with CTAB. This revised version was published online in August 2006 with corrections to the Cover Date.     

Use of carbowax 20M coated porapak Q for the gas chromatographic analysis of the products obtained by the ammoxidation of ethylene oxide

Summary GC separation of pure ethanolamines as well as mixtures with ethylene glycols, obtained from a real technological process is achived using Porapak Q coated with 15% Carbowax 20M. Symmetrical peaks, satisfactory resolution, and reasonable analysis times are obtained. The proposed method is suitable for a convenient, correct and express routine analysis.     

Mechanism and prediction of retention of oligomers in normal-phase and reversed-phase HPLC

Summary The simultaneous dependence of the retention in oligomeric series on the number of repeat structural units and on the mobile phase composition may be described by very similar equations for reversed-phase and for normal-phase systems.In reversed-phase systems, the separation selectivity of the individual oligomers is determined mainly by the size and by the polarity of the repeat structural unit, but the influence of a bulky and polar structural residue may also become important so that even reversed order of elution may be observed for oligomeric series with the same oligomeric units but significantly different end groups. For example, oligoethylene glycols are eluted in the order of increasing size of the oligomers, whereas ethoxylated nonylphenols are eluted in the order of decreasing size.In normal-phase systems, the separation selectivity in oligomeric series depends on the adsorption energy and on the adsorbed area of the oligomeric unit. If the oligomeric unit is small, the concentration of the polar solvent in the binary organic mobile phase has only a minor effect on retention and selectivity, which may be controlled by taking account of the nature of the adsorbent and of the polar solvent or by varying the proportion of two polar solvents in a ternary mobile phase.