Realization of morphing logic gates in a repressilator with quorum sensing feedback

We demonstrate how a genetic ring oscillator network with quorum sensing feedback can operate as a robust logic gate. Specifically we show how a range of logic functions, namely AND/NAND, OR/NOR and XOR/XNOR, can be realized by the system, thus yielding a versatile unit that can morph between different logic operations. We further demonstrate the capacity of this system to yield complementary logic operations in parallel. Our results then indicate the computing potential of this biological system, and may lead to bio-inspired computing devices.     

Combined wave and ray based room acoustic simulations of audio systems in car passenger compartments,Part I: Boundary and source data

The present series of papers summarizes the results of a three-year research project on the realistic simulation of car audio sound in car passenger compartments using a combined Finite Element (FE) and Geometrical Acoustics (GA) approach. The simulations are conducted for the whole audible frequency range with the loudspeakers of the car audio system as the sound sources. The challenges faced during the project relate to fundamental questions regarding the realistic sound field simulation in small enclosures with strong modal and diffraction effects.The paper denoted here as Part I focuses on boundary and source representations in the FE and GA domain and suggests guidelines for a best-possible acquisition of the required data. Since a straight-forward determination of the boundary and source characteristics is mostly hampered by the immense complexity and inhomogeneity of the materials and loudspeaker configurations inside a car compartment, different measurement and calculation methods have been applied to determine the required data and quantify the corresponding uncertainty. The paper clearly points out the strength and weaknesses of the applied methods depending on the considered frequency range and material characteristics. In order to keep the complexity of the FE simulations at a manageable level, all passive boundaries were considered as locally reacting with impedance conditions.Part II of the study applies the obtained data in combined FE-GA room acoustic simulations and compares the simulated room impulse responses (RIR) with corresponding measurement results. In a final step the observed differences in the RIRs are related to the uncertainty and inherent errors in the boundary and source representation.     

Diffusion in Lorentz lattice gas automata with backscattering

The probability of first return to the initial intervalx and the diffusion tensorD _x are calculated exactly for a ballistic Lorentz gas on a Bethe lattice or Cayley tree. It consists of a moving particle and a fixed array of scatterers, located at the nodes, and the lengths of the intervals between scatterers are determined by a geometric distribution. The same values forx andD _x apply also to a regular space lattice with a fraction of sites occupied by a scatterer in the limit of a small concentration of scatterers. If backscattering occurs, the results are very different from the Boltzmann approximation. The theory is applied to different types of lattices and different types of scatterers having rotational or mirror symmetries.     

Pulsed gas lenses

The concept of a pulsed gas lens is proposed. Potential applications are envisaged and preliminary experiments with pulsed ray refraction are reported.     

环形线负载驱动变曲率反射镜技术

从薄板弹性理论出发,对可实现曲率变化的环形线负载驱动模型进行分析,给出了基于该模型的大镜厚比变曲率反射镜的形变方程.以较小的驱动力实现较大的中心形变为目标,利用MATLAB软件对不同反射镜厚度、驱动环半径下的反射镜形变情况进行模拟计算,结果表明,反射镜厚度范围在2~4 mm之间、驱动环半径数值在反射镜有效半径1/2处最佳.以此为依据,设计并研制了口径为100 mm、厚度为3 mm的铍青铜环形线负载驱动变曲率反射镜结构及原型样片,给出了变曲率反射镜整体结构前10阶的振动模态分析结果.完成装配后,反射镜原型样片的面形精度接近λ/30(λ为波长).对该结构进行极限曲率变化和面形精度保持的验证实验,通过对变曲率反射镜结构进行改进,环形线负载驱动能够实现超过30个波长(632.8 nm)的中心形变,且面形精度的变化与反射镜中心矢高的变化呈弱相关.     

基于耦合T型空腔的多重法诺共振现象

提出由T型空腔和挡板组成的两种金属-电介质-金属(MIM)波导结构,分别为:正T型空腔结构和倒T型空腔结构,并应用有限元法系统地研究了该结构的透射特性.对于正T型空腔结构,仿真结果出现了双重法诺共振现象,并且共振波长可以通过改变T型空腔长度和高度进行调节.该结构有助于设计成敏感度达到1 620nm/RIU、品质因数为5.4×10~4的纳米传感器.对于倒置T型空腔,在波导中产生了多重法诺共振现象,其敏感度可达1 560nm/RIU,品质因数为9.37×104.该结构有望在光学集成回路,特别是纳米传感器、光束分路器方面具有广泛应用.     

Spin–orbit stiffness of the spin‐polarized electron gas

In a spin‐polarized electron gas, Coulomb interaction couples the spin and motion degrees of freedom to build propagating spin waves. The spin wave stiffness S_sw quantifies the energy cost to trigger such excitation by perturbing the kinetic energy of the electron gas (i.e. putting it in motion). Here we introduce the concept of spin–orbit stiffness, S_so, as the energy necessary to excite a spin wave with a spin polarization induced by spin–orbit coupling. This quantity governs the Coulombic enhancement of the spin–orbit field acting of the spin wave. First‐principles calculations and electronic Raman scattering experiments carried out on a model spin‐polarized electron gas, embedded in a CdMnTe quantum well, demonstrate that S_so = S_sw. Through optical gating of the structure, we demonstrate the reproducible tuning of S_so by a factor of 3, highlighting the great potential of spin–orbit control of spin waves in view of spintronics applications. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Lattice-BGK approach to simulating granular flows

Many continuum theories for granular flow produce an equation of motion for the fluctuating kinetic energy density (granular temperature) that accounts for the energy lost in inelastic collisions. Apart from the presence of an extra dissipative term, this equation is very similar in form to the usual temperature equation in hydrodynamics. It is shown how a lattice-kinetic model based on the Bhatnagar-Gross-Krook (BGK) equation that was previously derived for a miscible two-component fluid may be modified to model the continuum equations for granular flow. This is done by noting that the variable corresponding to the concentration of one species follows an equation that is essentially analogous to the granular temperature equation. A simulation of an unforced granular fluid using the modified model reproduces the phenomenon of clustering instability, namely the spontaneous agglomeration of particles into dense clusters, which occurs generically in all granular flows. The success of the continuum theory in capturing the gross features of this basic phenomenon is discussed. Some shear flow simulations are also presented.     

Effect of size and indium-composition on linear and nonlinear optical absorption of InGaN/GaN lens-shaped quantum dot

Based on the Schr ¨odinger equation for envelope function in the effective mass approximation, linear and nonlinear optical absorption coefficients in a multi-subband lens quantum dot are investigated. The effects of quantum dot size on the interband and intraband transitions energy are also analyzed. The finite element method is used to calculate the eigenvalues and eigenfunctions. Strain and In-mole-fraction effects are also studied, and the results reveal that with the decrease of the In-mole fraction, the amplitudes of linear and nonlinear absorption coefficients increase. The present computed results show that the absorption coefficients of transitions between the first excited states are stronger than those of the ground states. In addition, it has been found that the quantum dot size affects the amplitudes and peak positions of linear and nonlinear absorption coefficients while the incident optical intensity strongly affects the nonlinear absorption coefficients.     

气体放电等离子体特性测量I-V曲线不对称性的研究

利用气体放电双探针法研究了等离子体的I-V曲线中的电流I相对于电压V轴交点的不对称性,并提出2种可能的解释:一认为是由于两探针表面积不同引起的;二认为是由于探针所在处等离子体电位不等引起的.本文利用仪器的工艺误差和调换放电管电压的方法,对提出的2种可能原因分别进行验证,并指出第二种解释的合理性,并对其进行了理论分析.