Lowering the driving voltage and improving the luminance of blue fluorescent organic light-emitting devices by thermal annealing a hole injection layer of pentacene

We chose pentacene as a hole injection layer (HIL) to fabricate the high performance blue fluorescent organic light-emitting devices (OLEDs). We found that the carrier mobility of the pentacene thin films could be efficiently improved after a critical annealing at temperature 120 °C. Then we performed the tests of scanning electron microscopy, atomic force microscopy, and Kelvin probe to explore the effect of annealing on the pentacene films. The pentacene film exhibited a more crystalline form with better continuities and smoothness after annealing. The optimal device with 120 ℃ annealed pentacene film and n-doped electron transport layer (ETL) presents a low turn-on voltage of 2.6 V and a highest luminance of 134800 cd/m² at 12 V, which are reduced by 26% and improved by 50% compared with those of the control device.     

超薄层BCP对有机电致发光器件性能的影响

采用真空热蒸镀的方法,在常规的双层器件结构的基础上,设计了三层双异质结有机电致发光器件(OLED):indium-tin oxide(ITO)/N,N′-diphenyl-N,N′-bis(1-naphthyl)(1,1′-biphenyl)-4,4′-diamine(NPB)/2,9-dimethyl-4,7-diphenyl-1,10-phenan throline(BCP)/8-hydroxyquinoline aluminum(Alq3)/Mg∶Ag。通过对器件的电致发光(EL)光谱及器件性能的表征,研究了不同超薄层BCP的厚度对OLED器件性能的影响。结果表明,当超薄层BCP的厚度从0.1nm逐渐增加到4.0nm时,器件的EL光谱实现了绿光→蓝绿光→蓝光的变化;BCP层有效地调节了载流子的复合区域,改变了器件的发光颜色,提高了器件的亮度和发光效率。     

显示技术的演进与应用

This paper overviews some display technologies which play main roles on today＇s display market. And new technologies which may be used for tomorrow＇s display technologies have been discussed. New technologies will boost the development of display technologies.     

Organic light‐emitting device dark spot growth behavior analysis by diffusion reaction theory

Dark spot growth rate tracing experiments performed on an organic light‐emitting device show that moisture entering into the device is relatively properly fitted by Fick's diffusion equation in the substrate/indium tin oxide (ITO)/hole transport layer (HTL)/silver (Ag) structure. It is believed that the moisture is dissolved into the polymer layer, which results in a decrease in the diffusion coefficient in the device with the substrate/ITO/HTL/electroluminescent (EL) polymer/Ag structure. The diffusion and chemical reaction occurring in the cathode layer further decreases the diffusion coefficient in the device with the substrate/ITO/HTL/EL polymer/calcium/Ag structure. Useful parameters, such as diffusion and solubility constants, describing possible mechanisms happening during dark spot growth on organic light‐emitting diode devices are extracted. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1697–1703, 2001     

Synthesis and properties of a thiophene-substituted diaza[7]helicene for application as a blue emitter in organic light-emitting diodes

Carbazole-based diaza[7]helicene substituted by thiophene groups, 2,12-dithiophene-5,15-dihexyl-5,15-diaza[7]helicene (6), was synthesised successfully and confirmed by ¹H NMR, ¹³C NMR, High Resolution Mass Spectrometry, Time of Flight Mass Spectrometry. Compound 6 exhibited good solubility and excellent thermal stability with no melting point and a high decomposition temperature of 453.64 °C. A doped device with a structure of ITO/NPB (50 nm)/CBP: 10% 6 (30 nm)/Bphen (20 nm)/Mg:Ag (150 nm)/Ag (50 nm) emitted the blue light at 460 nm with Commission Internationale de LEclairage (CIE) coordinate of (0.176, 0.26). The maximum brightness and external quantum efficiency (EQE) were 2306 cd m^?2 and 0.41%, respectively.     

Novel liquid crystalline organic semiconducting oligomers incorporating N-heterocyclic carbazole moieties for fluorescent OLEDs

A novel class of nematic liquid crystalline organic semiconducting oligomers incorporating N-heterocyclic carbazole moieties has been synthesised using simple and highly efficient reaction pathways. The electroluminescent colour of these novel oligomers can be varied in a controlled manner by molecular design. The values of the ionisation potential and the electron affinity of these electroluminescent oligomers can also be matched by structural design to the Highest Occupied Molecular Orbital (HOMO) energy level of the electron-blocking layer and the Lowest Unoccupied Molecular Orbital (LUMO) energy level of electron-transporting layer in the Organic light emitting diodes to create low charge-injection barriers for electrons and holes, respectively leading to electroluminescence with an efficacy up to 4.1 cd A^?1.     

红色磷光喹喔啉铂(II)配合物及其有机电致发光器件的制备

利用2,3-二苯基喹喔啉和氯亚铂酸钾(K2PtCl4)反应,合成了一种新型喹喔啉铂的配合物(DPQ)Pt(acac),通过元素分析,1HNMR测定对配合物结构进行了表征,结果显示得到的是目标化合物.利用紫外光谱和荧光光谱对配合物进行了研究.利用该材料作为磷光染料制备了结构为ITO/NPB(21nm)/NPB∶7%(DPQ)Pt(acac)(17.5nm)/BCP(7nm)/Alq3(21nm)/Mg∶Ag(10∶1)(120nm)/Ag(10nm)的有机电致发光器件(OLED).结果表明,该配合物在442和485nm处存在单重态1MLCT(金属到配体的电荷跃迁)和三重态3MLCT的吸收峰;在632nm处有较强的金属配合物三重态的磷光发射;该器件的启动电压是5.0V,器件的最大亮度为1516cd·m-2,外量子效率为0.66%,流明效率为0.26lm·W-1,是一种红色磷光材料.     

OLED器件新型应用研究进展

有机发光二极管(organic light-emitting diodes,OLED)具有可柔性制备、低驱动电压、低功耗等优点,近年来技术上的突飞猛进及其广泛的应用前景,使之成为平板显示、新型照明、可穿戴,以及智能电子产品开发中最热门的研究课题之一.作为新一代的显示及照明技术,小尺寸OLED显示器已实现商业化,大尺寸O...     

可溶液加工蓝色聚集诱导发光小分子的合成及其器件性能

利用四苯基甲烷中碳原子特殊的sp³轨道杂化结构来打断并控制分子内共轭程度,并采用硅原子替换四苯基甲烷中的碳原子合成四苯基硅烷.将这两种结构作为核,在其四周以四苯乙烯（TPE）或三苯乙烯（triPE）修饰,设计并合成了六个具有聚集诱导发光（AIE）效应的小分子.这些分子均可以溶解在常见有机溶剂中并具有良好的热稳定性.通过溶液旋涂法将其应用到有机电致发光器件（OLED）中,得到最好的器件效率为亮度最大值（L_max）1730 cd·m^-2,电流效率最大值（L_max）2.21 cd·A^-1,功率最大值（η_p,max）0.77 lm·W^-1,外量子效率最大值（η_ext,max）1.01%.