Electrospinning synthesis and photocatalytic property of CaFe2O4/MgFe2O4 heterostructure for degradation of tetracycline

CaFe₂O₄/MgFe₂O₄ nanowires with heterostructure had been successfully synthesized by electrospinning method. The obtained samples were systematically characterized by scanning electron microscopy (SEM), X‐Ray diffraction (XRD), UV–Vis diffuse reflectance spectra (UV‐Vis DR) and Environment scanning electron microscopy (ESEM). The novel CaFe₂O₄/MgFe₂O₄ nanowires exhibit an enhanced photocatalytic activity for degrading of tetracycline (TC) under visible light. Compared with bare CaFe₂O₄ or MgFe₂O₄ samples, the prepared CaFe₂O₄/MgFe₂O₄ (Ca:Mg:Fe = 3:2:10) composited nanowires show the best photocatalytic performance with a degradation efficiency of 40% after 150 min reaction time. This enhancement is attributed to the heterostructure of CaFe₂O₄/MgFe₂O₄ nanowires, which effectively repress the recombination of photo‐generated electrons and holes. Based on heterostructure and energy band positions, the enhancement of mechanism under visible‐light enhances the photocatalytic activity.     

A Doping Technique that Suppresses Undesirable H2 Evolution Derived from Overall Water Splitting in the Highly Selective Photocatalytic Conversion of CO2 in and by Water

Photocatalytic conversion of CO₂ to reduction products, such as CO, HCOOH, HCHO, CH₃OH, and CH₄, is one of the most attractive propositions for producing green energy by artificial photosynthesis. Herein, we found that Ga₂O₃ photocatalysts exhibit high conversion of CO₂. Doping of Zn species into Ga₂O₃ suppresses the H₂ evolution derived from overall water splitting and, consequently, Zn‐doped, Ag‐modified Ga₂O₃ exhibits higher selectivity toward CO evolution than bare, Ag‐modified Ga₂O₃. We observed stoichiometric amounts of evolved O₂ together with CO. Mass spectrometry clarified that the carbon source of the evolved CO is not the residual carbon species on the photocatalyst surface, but the CO₂ introduced in the gas phase. Doping of the photocatalyst with Zn is expected to ease the adsorption of CO₂ on the catalyst surface.     

Catalytic Cleavage of Ether CO Bonds by Pincer Iridium Complexes

The development of efficient catalytic methods to cleave the relatively unreactive C? O bonds of ethers remains an important challenge in catalysis. Building on our group’s recent work, we report the dehydroaryloxylation of aryl alkyl ethers using pincer iridium catalysts. This method represents a rare fully atom‐economical method for ether C? O bond cleavage.     

Facile Preparation of WO3−x Dots with Remarkably Low Toxicity and Uncompromised Activity as Co-reactants for Clinical Diagnosis by Electrochemiluminescence

The exceptional nature of WO_3−x dots has inspired widespread interest, but it is still a significant challenge to synthesize high-quality WO_3−x dots without using unstable reactants, expensive equipment, and complex synthetic processes. Herein, the synthesis of ligand-free WO_3−x dots is reported that are highly dispersible and rich in oxygen vacancies by a simple but straightforward exfoliation of bulk WS₂ and a mild follow-up chemical conversion. Surprisingly, the WO_3−x dots emerged as co-reactants for the electrochemiluminescence (ECL) of Ru(bpy)₃²⁺ with a comparable ECL efficiency to the well-known Ru(bpy)₃²⁺/tripropylamine (TPrA) system. Moreover, compared to TPrA, whose toxicity remains a critical issue of concern, the WO_3−x dots were ca. 300-fold less toxic. The potency of WO_3−x dots was further explored in the detection of circulating tumor cells (CTCs) with the most competitive limit of detection so far.     

Unstable Ni leaching in MOF-derived PtNi-C catalyst with improved performance for alcohols fuel electro-oxidation

Significance of unstable species leaching was for the first time demonstrated on MOF-derived catalysts by taking PtNi-C as an example, that was instructive for the relevant catalyst fabrication and performance study. PtNi-C catalyst was synthesized by combining Pt nanoparticles with Ni-BTC after annealing in the tube furnace and the unstable Ni species can be easily leached out in nitric acid, and the stable PtNi nanoparticles trapped in the graphite carbon layer were obtained. The greatly improved catalytic ability for alcohol fuels oxidation was verified by comparing the fresh and acid leached catalysts in terms of the high peak current density, specific and mass activity and rapid charge transfer kinetics and high catalytic stability. The current work guides the importance of unstable assistant promoter removal for the MOF derived catalysts.     

Chemical‐Reductant‐Free Electrochemical Deuteration Reaction using Deuterium Oxide

We report a method for the electrochemical deuteration of α,β‐unsaturated carbonyl compounds under catalyst‐ and external‐reductant‐free conditions, with deuteration rates as high as 99 % and yields up to 91 % in 2 h. The use of graphite felt for both the cathode and the anode was key to ensuring chemoselectivity and high deuterium incorporation under neutral conditions without the need for an external reductant. This method has a number of advantages over previously reported deuteration reactions that use stoichiometric metallic reductants. Mechanistic experiments showed that O₂ evolution at the anode not only eliminates the need for an external reductant but also regulates the pH of the reaction mixture, keeping it approximately neutral.     

Nitrous Oxide Adsorption and Decomposition on Zeolites and Zeolite-like Materials

Decomposition of N₂O on modified zeolites, crystalline titanosilicalites, and related amorphous systems is studied by the catalytic and spectroscopic methods. Zinc-containing HZSM-5 zeolites and titanosilicalites with moderate Ti/Si ratios are shown to exhibit a better catalytic performance in N₂O decomposition as compared with conventionally used Cu/HZSM-5 zeolites and amorphous Cu-containing catalysts. Dehydroxylation of the HZSM-5 zeolite by calcination at 1120 K results in an enhancement of the N₂O conversion. The mechanism of the reaction and the role of coordinatively unsaturated cations and Lewis acid sites in N₂O decomposition are discussed on the basis of the spectroscopic data.     

雾化辅助化学气相沉积法氧化镓薄膜生长研究

采用自主设计搭建的雾化辅助化学气相沉积系统设备,开展了Ga₂O₃薄膜制备及其特性研究工作。通过X射线衍射研究了沉积温度、系统沉积压差对Ga₂O₃薄膜结晶质量的影响。结果表明,Ga₂O₃在425~650 ℃温度区间存在物相转换关系。随着沉积温度从425 ℃升高至650 ℃,薄膜结晶分别由非晶态、纯α-Ga₂O₃结晶状态向α-Ga₂O₃、β-Ga₂O₃两相混合结晶状态改变。通过原子力显微镜表征探究了生长温度对Ga₂O₃薄膜表面形貌的影响,从475 ℃升高至650 ℃时,薄膜表面粗糙度由26.8 nm下降至24.8 nm。同时,高分辨X射线衍射仪测试表明475 ℃、5 Pa压差条件下的α-Ga₂O₃薄膜样品半峰全宽仅为190.8″,为高度结晶态的单晶α-Ga₂O₃薄膜材料。     

Scanning force microscopy and amplitude versus distance measurements on single‐crystal oxide surfaces

Dynamic mode imaging and investigations on amplitude versus distance measurements were carried out on surfaces of single‐crystal; SrTiO₃, Al₂O₃ and LaAlO₃. Experiments were performed to optimize the imaging parameters for surfaces having varying elastic properties. The dependence of the amplitude–distance curve on different materials and the amplitude of oscillation was investigated. For SrTiO₃, a low‐drive amplitude provided the linear region necessary for imaging. A large amplitude of oscillation, however, created dips in the amplitude–distance curves, presumably due to complications in the tip dynamics such as bifurcation, period doubling, etc. In the case of Al₂O₃ and LaAlO₃, amplitude–distance curves were characterized by oscillations for lower tip sample separations and step‐like discontinuities in the stiff region. The magnitude of the oscillations and discontinuities was found to decrease with amplitude and eventually could be eliminated. Thus, for these samples a large amplitude of the cantilever provided the linear region required for imaging. It was observed also that two different surfaces of Al₂O₃ (c‐cut and r‐cut) yield totally different amplitude–distance curves consistent with their standard differences. The results indicate the complex behaviour of amplitude–distance curves, which not only vary from one sample to another but from one surface to another for a given sample. Copyright © 2004 John Wiley & Sons, Ltd.     

In situ X-ray diffraction study of reduction processes of Fe3O4- and Fe1−xO-based ammonia-synthesis catalysts

The temperature-programmed reduction process of two types of industrial ammonia-synthesis catalysts, A110 and ZA-5, which are, respectively, based on Fe₃O₄ and Fe_1−xO precursors, were studied by in situ X-ray power diffraction (XRD). It has been found that the ZA-5 has lower reduction temperature and faster reduction rate, and its active phase α-Fe possesses a higher value of lattice microstrain than A110. The simulation based on Rietveld refinement has also shown that the shape of α-Fe grain of ZA-5 has a mixed shape of cube and sphere with more exposing (111) and (211) planes, while that of A110 looks like a concave cube with more exposing (110) planes. Based on the results obtained, a growth model of α-Fe during the reduction of Fe₃O₄- and Fe_1−xO-based ammonia-synthesis catalysts is proposed, and the origins for the activity difference has been also discussed.