Photoelectron spectroscopic study of Li oxides on Li over-deposited V2O5 thin film surfaces

The Li oxides species formed on Li over-deposited V₂O₅ thin film surfaces have been studied by using X-ray and UV induced photoelectron spectroscopy (XPS and UPS). The photoelectron spectroscopic data show that the Li over-deposited V₂O₅ system itself is not stable. Further chemical decomposition reactions are taken place even under UHV conditions and lead to form Li₂O and Li₂O₂ compounds on the surface. The formation of Li₂O₂ causes to arise an emission line at about 11.3 eV in the valence band spectra.     

火焰原子吸收法测定霞石中的氧化钾和氧化钠

本方法用于测定霞石中的钾、钠，主要通过在溶样时加入氢氟酸除去二氧化硅，调整溶液中钾、钠的含量，消除互相之间的干扰，加入氯化铯消除电离因素的干扰，提高了分析结果的准确性和重现性，使测定结果更接近化学分析值。回收率为99．2％-101．6％。     

Metallization of U3O8via catalytic electrochemical reduction with Li2O in LiCl molten salt

The concept of a novel electrochemical reduction process for the treatment of spent nuclear fuels in Li₂O-LiCl molten salt was proposed and fresh tests using U₃O₈ powder were carried out to elucidate the reaction mechanism and verify the feasibility of the process. Electrolysis of Li₂O and reduction of U₃O₈ powder took place simultaneously at the cathode part of the electrolysis cell via a catalytic EC mechanism and the conversion of U₃O₈ to U metal was more than 99%. This revised version was published online in June 2006 with corrections to the Cover Date.     

Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

Vibsanin O, a novel diterpenoid from Viburnum awabuki

Vibsanin O, isolated from the leaves and twigs of Viburnum awabuki, is an unprecedented bicyclic diterpenoid. The structures of vibsanin O was established by extensive analysis of spectroscopic data.     

深紫外无机非线性光学晶体硼铍酸锶及其分子工程学探索方法

阐述了紫外无机非线性光学晶体分子工程学探索方法的基本特点，具体分析深紫外无机非线性光学晶体硼铍酸锶（ＳＢＢＯ）以氟硼铍酸钾（ＫＢＢＦ）为主要参考晶体的分子设计方法，随后根据晶体结构研究、单晶培养、和非线性光学性能测定等实验结果讨论ＳＢＢＯ作为新型深紫外无机晶体的主要优点，即它既具有更短的紫外吸收边（接近１５５ｎｍ）和较大的非线性光学系数（ｄ２２（ＳＢＢＯ）＝０６×ｄ２２（ＢＢＯ）＝１３８ｐｍ／Ｖ），同时晶体无明显层状习性，并肯有良好的化学稳定性和机械性能     

Recycling in telomerization of butadiene with D‐xylose: Pd(TPPTS)n‐KF/Al2O3 as an active catalyst

A palladium‐TPPTS catalyst heterogenized on KF/alumina has been shown to be effective and recyclable for the selective formation of monooctadienylxylopyranosides via the telomerization of butadiene with D ‐xylose. Copyright © 2007 John Wiley & Sons, Ltd.     

氧化铁浆液脱硫的实验研究与理论分析

本文实验研究了氧化铁浆液在酸性环境下脱除烟气中的二氧化硫气体。实验在一自制的脱硫塔中进行。通过燃烧液化石油气来产生烟气,将氧化铁的超细粉加入水中作为脱硫介质。实验中研究了二氧化硫初始浓度、水气比对脱硫效率的影响。从实验结果可以看出,脱硫率随着水气比的增加而增大;随二氧化硫的初始浓度的增加,其脱硫率呈降低趋势。在文中同时分析了氧化铁浆液的脱硫机理和此方法脱硫的优点以及目前存在的问题。     

Pulsed reactive crossed beam laser ablation of La0.6Ca0.4CoO3 using O: Where does the oxygen come from?

The composition of thin perovskite films, especially the oxygen content, is a crucial parameter which influences many physical properties, such as conductivity and catalytic activity. Films produced by pulsed laser deposition are normally annealed in an oxygen atmosphere after deposition to achieve a desired oxygen content. In pulsed reactive crossed beam laser ablation, no annealing step is necessary, but a fundamental question regarding this deposition technique is still open: where does the oxygen in the films come from?There are three possibilities, i.e. from the target, from the gas background, or from the gas pulse. To answer this question two experiments were performed: ¹⁸O₂ was used during the deposition process as background gas with ¹⁶O anions in the target and ¹⁶O₂ gas pulse, and a ¹⁸O₂ gas pulse with ¹⁶O from the target and background. These experiments revealed that the quantification of the oxygen origin is only possible, when no oxygen exchange occurs at the deposition temperature. The films are characterized after deposition by elastic recoil detection analysis (ERDA) to determine the ¹⁶O/¹⁸O ratio. Experiments with different oxidizing species in the gas pulse (N₂O and O₂) confirm that the oxidizing potential (N₂O > O₂) as well as the number of molecules are important.     

双齿配体—1,2—C_6H_4SX(X=O,S)的钴化合物~1H NMR研究

以~1H NMR谱学和磁化率对一些含邻苯二硫酚或巯基苯酚配体的钴化合物的磁性作了研究,并讨论了它们的电子结构。