Chromatographic performance of deuterated solvents in reversed phase micro high performance liquid chromatography

The chromatographic performance of the deuterated solvents, CD₃OD and D₂O, has been investigated in reversed-phase micro high performance liquid chromatography. The chromatographic performance of CD₃OD is only slightly superior to that of CH₃OH. However, the performance of D₂ is significantly superior to that of H₂O, separation of aromatics being improved by about 30%. D₂ is a particularly powerful solvent for the separation iof deuterated and non-deuterated compounds.     

A density functional study on a biomimetic non-heme iron catalyst: insights into alkane hydroxylation by a formally HO-FeV=O oxidant

The reactivity of [HO-(tpa)Fe(V)=O] (TPA=tris(2-pyridylmethyl)amine), derived from O-O bond heterolysis of its [H(2)O-(tpa)Fe(III)-OOH] precursor, was explored by means of hybrid density functional theory. The mechanism for alkane hydroxylation by the high-valent iron-oxo species invoked as an intermediate in Fe(tpa)/H(2)O(2) catalysis was investigated. Hydroxylation of methane and propane by HO-Fe(V)=O was studied by following the rebound mechanism associated with the heme center of cytochrome P450, and it is demonstrated that this species is capable of stereospecific alkane hydroxylation. The mechanism proposed for alkane hydroxylation by HO-Fe(V)=O accounts for the experimentally observed incorporation of solvent water into the products. An investigation of the possible hydroxylation of acetonitrile (i.e., the solvent used in the experiments) shows that the activation energy for hydrogen-atom abstraction by HO-Fe(V)=O is rather high and, in fact, rather similar to that of methane, despite the similarity of the H-CH(2)CN bond strength to that of the secondary C-H bond in propane. This result indicates that the kinetics of hydrogen-atom abstraction are strongly affected by the cyano group and rationalizes the lack of experimental evidence for solvent hydroxylation in competition with that of substrates such as cyclohexane.     

CuO／CeO2和CuO／Al2O3催化剂的催化性能

本文以ＣＯ氧化为模式反应考察了ＣｅＯ２和Ａｌ２Ｏ３负载氧化铜催化剂的氧化活性，运用ＸＲＤ和ＴＰＲ技术研究了催化剂的还原性能和物相结构，结果表明：载体性质对负载ＣｕＯ催化剂的ＣＯ氧化活性有很大影响，ＣｕＯ／ＣｅＯ２催化剂活性明显高于ＣｕＯ／Ａｌ２Ｏ３催化剂．催化剂的还原特性随载体不同而不同．同时发现，热处理对催化剂铜物种的存在形式，晶粒大小、还原特性及其催化活性有明显影响，ＣｕＯ／Ａｌ２Ｏ３催化剂活性下降的主要因素是生成了活性较低的ＣｕＡｌ２Ｏ４相，而ＣｕＯ／ＣｅＯ２催化剂活性下降是由于ＣｕＯ和ＣｅＯ２发生烧结，晶粒变大     

Understanding the catalytic role of flexible chiral δ-amino alcohols: the 1-(2-aminoethyl)norbornan-2-ol model

An empiric first approach to the knowledge about the structural factors influencing the catalytic behavior of conformationally flexible δ-amino-alcohol-based ligands, for the enantioselective addition of dialkylzincs to prochiral carbonyl groups, has been applied using the 1-(2-aminoethyl)norbornan-2-ol moiety as the model chiral system, and the asymmetrically catalyzed addition of diethylzinc to benzaldehyde as the test reaction. For this purpose, a selected small library of seven norbornane-based chiral ligands, bearing well-defined structural variations to allow a comparative study, that is, variation of the relative configuration and steric hindrance at the C(2), C(3) and/or C(7) norbornane positions, has been synthesized and probed in the mentioned test reaction. The experimental results obtained have been rationalized empirically using diastereomeric Noyori-like transition states, demonstrating that the conformational flexibility of the δ-amino-alcohol ligands, contrary to the more studied and rigid β-amino-alcohols, plays a crucial role on the catalytic behavior of such ligands (stereochemical sense and degree of the stereodifferentiation in the asymmetric process), which makes such structural factors, important for the improved design of new related chiral catalysts. In this sense, a robust crude empirical model for the prediction of the catalytic behavior of such δ-amino-alcohol-based ligands is proposed.     

Siliceous materials with the surface polymer layer composed of dextran-polyimine mixture as column packings for liquid chromatography

Summary Forming a polymer layer on the surface of siliceous materials is one of the methods for protecting the silica skeleton from dissolution in alkaline mobile phases as well as eliminating the negative influence of silanol groups on separated molecules e.g. proteins. Polysaccharides, especially their derivatives bearing amine groups, can play the role of the surface layer. This paper discusses the possibilities of preparing such a layer by cross-linking a dextran-polyimine mixture (rather than the traditionally used DEAE-dextran) deposited on the surface of the solid material. The results presented prove the utility of synthesized materials as supports for affinity ligands in high performance affinity chromatography or as supports for complexed metal ions in ligand-exchange chromatography. The properties of the sorbents with a polymer layer can be changed both by the composition of the cross-linked mixture and by chemical modification.     

Synthesis of N-heterocyclic carbene precursors bearing biphenyl units and their use in ruthenium-catalyzed ring-opening metathesis polymerization

A range of new imidazolium and imidazolinium chlorides bearing biphenyl units on their nitrogen atoms was synthesized. They differed by the electron-withdrawing or -donating nature and the steric bulk of the substituents on their aromatic rings. These various N-heterocyclic carbene (NHC) precursors were combined with the [RuCl₂(p-cymene)]₂ dimer and potassium tert-butoxide to generate the corresponding ruthenium-arene complexes [RuCl₂(p-cymene)(NHC)] in situ. The catalytic activity of these species was investigated in the photoinduced ring-opening metathesis polymerization (ROMP) of cyclooctene. The results obtained confirmed the necessity of blocking the ortho-positions of the phenyl rings in the vicinity of the metal center in order to attain high catalytic efficiencies. They also showed that changing the steric and electronic properties of the substituents on the remote phenyl rings of the biphenyl units had no significant influence on the outcome of the polymerization.     

Diffusion behavior of pharmaceutical O/W microemulsions studied by dynamic light scattering

Dynamic light scattering experiments have been performed at various concentrations, of pharmaceutical oil-in-water microemulsions consisting of Eutanol G as oil, a blend of a high (Tagat O2) and a low (Poloxamer 331) hydrophilic–lipophilic balance surfactant, and a hydrophilic phase (propylene glycol/water). We probe the dynamics of these microemulsions by dynamic light scattering. In the measured concentration range, two modes of relaxation were observed. The faster decaying mode is ascribed classically to the collective diffusion D _c (total droplet number density fluctuation). We show that the slow mode is also diffusive and suggest that its possible origin is the relaxation of polydispersity fluctuations. The diffusion coefficient associated with this mode is then the self-diffusion D _s of the droplets. It was found that D _c and D _s had opposite volume fractions of oil plus surfactants (ϕ) dependence and a common limiting value D ₀ for ϕ=0. Average hydrodynamic radius (R _h=10.5 nm) of droplets was calculated from D ₀. R _h is supposed to compose the inner core, a surfactant film including possible solvent molecules, which migrate with the droplet. The concentration dependence of diffusion coefficients reflects the effect of hard sphere and the supplementary repulsive interactions which arises due to loss of entropy, when absorbed chains of surfactant intermingle on the close approach of the two droplets. This mechanism could also explain the observed stability of our systems. The estimated extent of polydispersity is 0.22 from the amplitude of slower decaying mode. The polydispersity in microemulsion systems is dynamic in origin. Results indicate that the time scale for local polydispersity fluctuations is at least three orders of magnitude longer than the estimated time between droplet collisions.     

Selective Oxidation of Methane to Methanol Using Molecular Oxygen on MoOx／（LaCoO3＋Co3O4） Catalysts

Comparatively high CH3OH selectivity (60.0%) and yield (6.7%) were obtained on MoOx/(LaCoO3 Co3O4) catalysts in selective oxidation of methane to methanol using molecular oxygen as oxidant. The interaction between MoOx and La-Co-oxide modified the molecular structure of molybdenum oxide and the ratio of O^-/O^2- on the catalyst surface, which controlled the catalytic performance of MoOx/(LaCoO3 Co3O4) catalysts.     

Fluorinated lignands in HPLC

Summary The chromatographic behaviour of C₆F₅(CH₂)₃SiCl₃, C₆H₅(CH₂)₃SiCl₃, CF₃(CF₂)₇CH₂CH₂SiCl₃ and n-C₁₀H₂₁SiCl₃ as well as the bonding of these ligands to silica is described. Phases with partially fluorinated ligands show entirely different chromatographic characteristics to analogous phases, where hydrogen replaces fluorine. The silica with the pentafluorophenyl-3-n-propyl-C₆F₅(CH₂)₃-ligand has higher k-values and a better selectivity for aromatic hydrocarbons than that with phenyl-3-n-propyl C₆H₅(CH₂)₃-groups, whereas the phase with the fluorinated carbon chain is less useful than the silica modified with n-decyltrichlorosilane n-C₁₀H₂₁SiCl₃. The first effect can be explained by complex formation, and the second may be due to a different contact area between the ligand and the solute. The normal hydrocarbon chains hinder each other sterically and expose many adsorption sites, in contrast the perfluorinated chains are sterically fixed and are the first example of real brushes in HPLC.     

Ab initio and DFT studies on tautomerism of indazole in gaseous and aqueous phases

Electronic structure of optimized Ge₅, Ge₁₇, Ge₅–O and Ge₅ embedded in SiO₂ nanoparticles have been studied by density functional theory to find out the effect of cluster size and Ge–O bond(s) on the optical energy gap between LUMO and HOMO. It was found that the optical energy gap depends on both cluster size and the number of Ge–O bonds nonlinearly. The optical energy gap was found to be in visible light range when the Ge₅ nanoparticle has been embedded in SiO₂ matrix.