含吡咯烷酮基丙烯酸酯类单体的合成及聚合

轻度交联的聚甲基丙烯酸2-羟乙酯(HEMA)是众所周知的医用水凝胶,即所谓的“Hvdron”。但其吸水率一般在59%(EWC为37%),并不尽人意。近年来,为了提高这类水凝胶的亲水性及生物相容性,常用一些亲水性的烯类单体进行表面改性或通过共聚以达到此目的,N-乙烯基吡咯烷酮是较为常用的这类单体之一。本文合成了含吡咯烷酮基丙烯酸酯类的单体,即丙烯酸2-N-吡咯烷酮基乙酯(PyEA),甲基丙烯酸2-N-吡咯烷酮基乙醋(PyEMA),并研究了这两种单体在甲基丙烯酸二甲氨乙酯(DMAEMA)与过硫酸钾(KPS)所组成的氧化还原引发体系下的聚合。     

Studies on the Spectral Behavior between Protein with Poniacyl Carmine 2B and its Analytical Application

In this paper, the spectral behavior of protein and Poniacyl Carmine 2B (PC 2B) has been studied by spectrophotometric method. The conditional constants, apparent combination constant K and maximum binding number n, were used to express the combination ability of the reactions between PC 2B and protein under a set of given conditions. The Sandell index s was used to express the sensitivity of the determination of protein. The factors, acidity, PC 2B concentration and the ionic strength, were discussed by the change of apparent combination constant and maximum binding number. It was found that acidity of the solution, PC 2B concentration and ionic strength had a significant effect on the sensitivity of the assay of protein. Under the optimal conditions, the apparent combination constant K and the maximum binding number n were 2.36 × 10⁶ L mol^?1 and 95, respectively. With further investigation, it was found that the Scatchard model was suitable in treating the data obtained in the experiments. In the buffer medium of HCl‐KCl at 1.87, the addition of protein made the maximum absorption of the system move from 527 nm to 513 nm. Its apparent molar absorptivity is 4.46 × 10⁵ Lmol^?1 cm^?1 at 513 nm. Beer's law is obeyed in the range of 0 ? 55 μg mL^?1. The system developed in this paper has been used for the determination of protein in milk powder successfully.     

Ru/Mn-Ce/TiO2催化剂催化湿式氧化丁二酸的反应活性和动力学研究

在二氧化钛载体中通过掺杂Ru，Mn，Ce制备了一系列用于催化湿式氧化的催化剂，利用XRD，TEM，BET等手段对催化剂进行了表征．在反应温度T=210～270℃，氧分压Po2=2．1MPa条件下，在间歇式高压反应釜中对丁二酸进行了降解实验．催化剂在反应中有很高的催化活性．催化剂在30min内对丁二酸降解的COD去除率为54．4～98．3％．Ru及Mn，Ce的氧化物对催化活性都有促进作用．建立了丁二酸催化湿式氧化的一级分段动力学模型．基于COD的一段及二段反应的活化能分别为43．74kJ／mol和54．28kJ／mol．     

Synthesis and Some Transformations of 2-(3-Amino-1-Phenylpropyl)furan

A preparative method was developed for the synthesis of ethyl furfurylidenecyanoacetate. Its condensation with phenylmagnesium bromide gave ethyl α-cyano-β-(2-furyl)hydrocinnamate, the decarboxylation of which led to β-(2-furyl)hydrocinnamonitrile. Reduction of this nitrile with lithium aluminum hydride gave 2-(3-amino-1-phenylpropyl)furan. Some of its transformations were studied.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 517–521, April, 2005.     

Charge donation to and dearomatization of benzene attending complexation: DFT estimates of binding energies of TpMXO(L) with benzene, for Tp = hydridotris(pyrazolyl) borate, MXO = MoNO, ReCO, and WNO, and L = ammonia, N-methylimidazole, pyridine, phosphine, methyl isocyanide, and carbon monoxide

By density functional methods we characterize the bonding and charge distribution in complexes of benzene with dearomatizing agents tpReCO(L), tpMoNO(L), and tpWNO(L), where tp = hydrido Tris (pyrazolyl)borate), for a range of ligands L. Our LSDA and B3LYP density functional calculations use the Spartan LACVP+ basis and pseudopotential on Re, Mo, and W and 6-31G* on light atoms. The binding energy is strongly dependent on the nature of the ligand L, being greatest for L = ammonia and N-methylimidazole and weakest for CH3NC and CO. We find a correlation between strength of binding and electron transfer from the dearomatizing agents toward benzene. For the most strongly bound systems we find substantial (up to 500 millielectrons) charge transfer towards benzene, while for the most weakly bound systems charge is withdrawn from benzene. Structural details illustrate the ability of Re, Mo, and W species to dearomatize complexed benzene, which is extensive for all but the most weakly bound species with L = MeNC and CO. Re and W dearomatizing agents, which are computed and observed to form stable complexes with benzene, may be economic alternatives to osmium dearomatizing agents.     

LIGHT-SCATTERING STUDY OF POLYELECTROLYTE HOLLOW CAPSULES

Silver halide (AgX) microcrystal was used as template to synthesize hollow polyelectrolyte capsules. These hollow capsules were characterized by laser light scattering (LLS) used to measure the size of the capsules in solution. The ratio of hydrodynamic radius (Rh) from dynamic LLS to the radius of gyration (Rg) from static LLS is almost unity, revealing that the entities are hollow in solution. The results suggest that the LLS method can be regarded as a good complement to the confocal laser scanning microscopy (CLSM) method for the characterization of small hollow capsules, and it possesses the advantage of not needing fluorescence labeling.     

Structure of thiocyanate adlayers on Rh(111): an in situ STM study

In situ scanning tunneling microscopy (STM) was used to examine the structure of thiocyanate adlayers specifically adsorbed on Rh(111) in solutions of potassium hydroxide and perchloric acid, both containing potassium thiocyanate (KSCN). An atomically flat terrace-step structure was consistently observed on Rh(111) surfaces prepared by the flame-annealing-quenching method. The Rh(111)-(1 × 1) atomic structure was discerned on the atomically flat terrace even in the alkaline solution. High-resolution STM images disclosed two different structures of the SCN⁻ adlayers, () and (2 × 2), in the alkaline and the acidic media, respectively. In each structure, an individual adsorbed SCN⁻ ion appeared as a single spot with a constant corrugation height in STM images, suggesting that SCN⁻ ions adsorbed predominantly with their S-ends at particular bonding sites on Rh(111). The difference in the adlayer structure in the two solutions can be attributed to the interaction between adsorbed SCN⁻ and coadsorbed K⁺ in the alkaline solution, and is different from that between adsorbed SCN⁻ and H⁺ in the acidic solution. Received: 26 February 1997 / Accepted: 3 March 1997     

Synthesis,complexation, and photochemistry of benzobisthiazole-based bis(crown ether)

Benzobisthiazole-based bis(crown ether) was synthesized and its complexation with alkali and alkaline earth cations was studied. Photochemical transformations of the free ligand and its complexes with alkaline earth cations involve E,Z-photoisomerization and [2+2] photocycloaddition. Dedicated to Academician N. S. Zefirov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2056–2065, September, 2005.     

Bridged bis-pyridinylimino dinickel(II) complexes: Syntheses, characterization, ethylene oligomerization and polymerization

A series of bridged bis(pyridinylimino) ligands were efficiently synthesized through the condensation reaction of 4,4′-methylene-bis(2,6-disubstituted aniline) with 2-pyridinecarboxaldehyde or 2-benzoylpyridine. They reacted with (DME)NiBr₂ to form dinuclear Ni(II) complexes. All resultant compounds were characterized by elemental analysis, IR spectra as well as the single-crystal X-ray diffraction to confirm the structures of ligands and complexes. Activated with methylaluminoxane (MAO), these nickel complexes showed considerably good activities for ethylene oligomerization and polymerization. Their catalytic activities and the properties of PEs obtained were depended on the arched environment of ligand and reaction conditions.     

ADSORPTION OF 2,4-DICHLOROBENZOXYACETIC ACID ONTO HYPERCROSSLINKED RESIN MODIFIED BY PHENOLIC HYDROXYL GROUP (AM-1)

INTRODUCTIONAdsorption has been considered to be the best available technology for removing organics from water in the USSafe Drinking Water Act[1]. Due to many drawbacks of activated carbon[2-7], the most widely used adsorbent,hypercrosslinked polymeric adsorbents developed by Tsyurupa and Davankov[8] have been increasingly viewedas an alternative to activated carbon for selective removal of specific organic substances from contaminatedwater[9-12], and series of researches have been do…