General Approach to Single and Hybrid Metal Oxide Fiber Structures for High‐Performance Lithium‐Ion Batteries

Owing to the high specific capacity and energy density, metal oxides have become very promising electrodes for lithium‐ion batteries (LIBs). However, poor electrical conductivity accompanied with inferior cycling stability resulting from large volume changes are the main obstacles to achieve a high reversible capacity and stable cyclability. Herein, a facile and general approach to fabricate SnO₂, Fe₂O₃ and Fe₂O₃/SnO₂ fibers is proposed. The appealing structural features are favorable for offering a shortened lithium‐ion diffusion length, easy access for the electrolyte and reduced volume variation when used as anodes in LIBs. As a consequence, both single and hybrid oxides show satisfactory reversible capacities (1206 mAh g^?1 for Fe₂O₃ and 1481 mAh g^?1 for Fe₂O₃/SnO₂ after 200 cycles at 200 mA g^?1) and long lifespans.     

Improved Kinetic Rate Constants for Nylon 6, Nylon 6,6, and Nylon 6/6,6 Copolymer

Nylon 6 and 6,6 literature data are collected over a wide range of water concentrations and temperatures (0 ≤ [W]₀ ≤ 40.8 wt%, 200 ≤ T ≤300 °C) and used to fit parameters in an updated batch reactor model. The resulting copolymerization model uses side reactions to account for the complex influence of water on kinetics and reaction equilibria. The proposed parameter estimates result in a significant improvement in the fit to the data, corresponding to a 73% reduction in the weighted‐least‐squares objective function compared to when the parameters of Arai et al. are used. Copolymerization simulations are conducted at industrially relevant conditions, shedding light on the complex influence of water and on the potential to include waste nylon 6 cyclic dimer in the feedstock. The model and parameter estimates will be helpful in future models of nylon 6/6,6 copolymerization in continuous reactor systems.     

Novel benzimidazole derivatives as anti-cervical cancer agents of potential multi-targeting kinase inhibitory activity

Multi-target EGFR, HER2, VEGFR-2 and PDGFR is an improved strategy for the treatment of solid tumors. This work deals with synthesis of an array of new 6-benzoyl benzimidazole derivatives utlizing1-(6-benzoyl-2-(3,4-dimethoxyphenyl)-1H benzo[d] imidazol-1-yl)propan-2-one (1) as a starting compound. The new compounds were screened as cytotoxic agents against cervical cancer cells (Hela) and Doxorubicin served as a reference drug. Most of the tested compounds showed promising anticancer activity in addition to their safety towards the normal cell line. The most potent candidates were evaluated as EGFR, HER2, PDGFR-β and VEGFR2 inhibitors in comparison to Erlotinib. Compounds 9 and 13 exhibited promising suppression effects. Also, the latter compounds exhibited their ability to induce cellular apoptosis alongside cell cycle arrest at the G2/M phase and accumulation of cells in pre-G1 phase. Molecular docking analysis suggested that compounds 2c, 3f, 9, 12 and 13 tightly interacts with the amino acid residues in the active binding site of HER2 kinase.     

基于离散元的杆件断裂全过程数值模拟

杆件的断裂会涉及到大变形、非线性以及不连续等问题,通常的数值计算方法模拟这种复杂力学行为具有局限性。本文基于颗粒离散元法DEM,将接触粘结处的分布式弹簧用梁纤维进行等效,提出了一种适于结构弹塑性分析的DEM纤维梁模型,然后在此基础上构建了构件断裂模拟算法以及纤维破环准则。将该模型应用于悬臂梁结构,模拟了悬臂梁从弹性到弹塑性阶段,再到断裂破坏的全过程,数值模拟得到的结构响应和截面开裂破坏形态均较合理。最后将该方法应用于单层网壳倒塌破坏模拟,并与网壳振动台倒塌试验进行对比,结果表明,数值模拟得到的杆件断裂过程及结构倒塌模式与试验现象一致,验证了该模型的正确性和适用性。     

利用光纤传感器测量金属丝的杨氏模量

将反射式光纤位移传感器应用于杨氏模量测定仪,可以精确地测定金属丝杨氏模量。     

毛细管电泳-柱端安培检测法用于抗癌药物2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤的研究

采用毛细管电泳-安培检测法建立一种简单、快速、有效的同时分析抗癌药物2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤的新方法.在长50 cm、内径为25μm的未涂层毛细管中,采用20 mmol/L磷酸盐(pH为7.0)缓冲液作为运行液,当分离电压为21 kV时,两组分在12 min内达到基线分离.在上述最佳分离条件下,当电极电位为1.050V、进样时间为10 s时,2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤的峰电流和浓度之间呈良好的线性关系,其相关系数分别为0.999 20、.999 0,检测限分别为3.0×10-7、2.0×10-7mol/L.7次重复实验2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤的日间峰电流RSD分别为2.44%3、.46%.利用该法检测了牛血清蛋白中的2-氨基-6-巯基嘌呤和8-氮杂鸟嘌呤,回收率分别为100%-113%,93.0-102%.     

[SiNi(H2O)W11O39]6-多层组装膜修饰电极及其电化学行为

采用电化学生长法制备包含杂多酸[SiNi(H2O)W11O39]6-(SiNiW11)和聚合物阳离子PDDA的多层膜修饰电极, 利用循环伏安法研究其电化学行为、 pH的影响及其对BrO3-和NO2-体系还原的电催化性能;并对多层膜电化学过程机理进行了初步探讨. 结果表明: 多层膜的增长均匀, 峰电流随层数的增加而增加;多层膜的峰电流随扫速的增加而增加;还原峰的峰电位随pH的增加而负移.     

咪唑啉纤维树脂分离富集/ICP-MS测定矿石中的痕量铂(Ⅳ)

本文提出了咪唑啉纤维树脂分离富集/ICP-MS测定矿石中痕量铂(Ⅳ)的方法。实验考察了影响咪唑啉纤维树脂分离富集痕量Pt(Ⅳ)的酸度、流速、洗脱液的组成、体积等因素,结果发现:在20%的王水介质中,Pt(Ⅳ)能定量吸附于树脂上并与大量其它金属分离;被吸附的Pt(Ⅳ)可用5%硫脲-1%HCl溶液定量洗脱,ICP-MS测定Pt(Ⅳ)的回收率为87%~102%。所建立的方法应用于硫镍矿管理样分析,其测定结果与推荐值吻合。     

多壁碳纳米管修饰电极同时测定维生素B2、B6、B12和维生素C

制备了多壁碳纳米管修饰玻碳电极(MWNT/GCE),研究了维生素B2、B6、B12和维生素C共存时在该电极上的电化学行为.实验发现,在HAc-NaAc缓冲溶液中,该电极可同时测定以上四种维生素,线性范围分别为1.0×10-6～1.0×10-4 mol/L、5.0×10-5～2.0×10-3 mol/L、5.0×10-5～7.5×10-4 mol/L和5.0×10-5～2.0×10-3 mol/L,其检出限分别为7.0×10-7 mol/L、1.0×10-5 mol/L、2.5×10-5 mol/L和5.0×10-6 mol/L.样品分析的RSD分别为1.66%、1.71%、2.26%和1.46%.方法简便快捷,可用于四种维生素同时分析测定.     

1,4-二氢吡喃类化合物与牛血清白蛋白相互作用的研究

用荧光光谱法研究了人体生理pH条件下,3-甲基-6-氨基-5-氰基-4-(2-邻羟基苯基)-1-苯基-1,4-二氢吡喃并[2,3-c]吡唑(I)与牛血清白蛋白(BSA)间的结合反应。获得了不同温度下I与BSA作用的结合常数K和结合位点数n,计算给体-受体间距离r为5.75 nm及能量转移效率E为0.74。证实了I与BSA的相互结合作用为单一的静态猝灭过程,结合力以疏水作用力为主。