富羧酸基团的共轭微孔聚合物:结构单元对孔隙和气体吸附性能的影响

Polar groups in the skeletons of conjugated microporous polymers (CMPs) play an important role in determining their porosity and gas sorption performance. Understanding the effect of the polar group on the properties of CMPs is essential for further advances in this field. To address this fundamental issue, we used benzene, the simplest aromatic system, as a monomer for the construction of two novel CMPs with multi-carboxylic acid groups in their skeletons (CMP-COOH@1 and CMP-COOH@2). We then explored the profound effect the amount of free carboxylic acid in each polymer had on their porosity, isosteric heat, gas adsorption, and gas selectivity. CMP-COOH@1 and CMP-COOH@2 showed Brunauer-Emmett-Teller (BET) surface areas of 835 and 765 m²·g^-1, respectively, displaying high potential for carbon dioxide storage applications. CMP-COOH@1 and CMP-COOH@2 exhibited CO₂ capture capabilities of 2.17 and 2.63 mmol·g^-1 (at 273 K and 1.05 × 10⁵ Pa), respectively, which were higher than those of their counterpart polymers, CMP-1 and CMP-2, which showed CO₂ capture capabilities of 1.66 and 2.28 mmol·g^-1, respectively. Our results revealed that increasing the number of carboxylic acid groups in polymers could improve their adsorption capacity and selectivity.     

A robust spin-coated optical sensing device for rapid determination of predominant metal ions in wastewater streams

The potential of an optical sensing material for determination of metal ions in wastewater streams is presented. The initial results in the development of a chromo-ionophore-based optical sensor for metal ions are detailed. An azo dye species, 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (BrPADAP), together with an ionophore and plasticiser was immobilised in a film of poly(vinyl chloride) (PVC). Initial investigations using the dye-impregnated sensing film showed a reproducible and reversible response to Pb(II) ions in aqueous solution. The response of this sensing film to Pb(II) at pH 6 was found to be linear in the 0.1-10 mg/L range, with a %RSD of 1.55%. The film can be regenerated by immersion in a low-pH buffer solution. The authors demonstrate how this method shows potential for analysis using once-off sensing probes. The sensing film response for Pb(II) occurs within 30 s.     

Synthese de Nouveaux Derives Phosphones a Chaine Perfluoree et Leurs Proprietes Adhesives Sur Acier

Ce mémoire décrit la synthèse de phosphonates comportant une chaîne perfluorée. Ces composés sont obtenus par la télomérisation d'allylphosphonates de dialkyle en présence d'un agent de transfert fluoré de type mercaptan. Ensuite, nous employons deux méthodes de déalkylation menant sélectivement soit au monoacide soit au diacide phosphonique. Tous ces produits comprenant une extrémité de chaîne phosphonée, sous forme acide ou ester, ont été caractérisés et leur adhésion respective sur des plaques d'acier est étudiée. Ces tests montrent que le monoacide phosphonique est un excellent promoteur d'adhésion et qu'il est aussi efficace que le diacide. This article describes the synthesis of phosphonic derivatives bearing a perfluorinated chain. These compounds have been synthetized by telomerization of dialkyl allylphosphonate with a fluorinated transfer agent type mercaptan. Then two methods of dealkylation leading selectively were used to mono or to diacid phosphonic moieties. All the products bearing phosphonic end-groups, more or less acidic, have been characterized and their own adhesion on steel plates is studied. These tests show that phosphonic monoacid is an excellent adhesion promoter on steel, as efficient as the diacid compound.     

Synthesis of Tetrahydrobenzazepinesulfonamides and Their Rearrangement to Diarylsulfones

A new class of diarylsulfones, in which tetrahydrobenzazepine comprises one of the aromatic moieties, has been synthesized via the acid‐catalyzed rearrangement of several substituted benzazepinesulfonamides. The rearrangement is normally ortho but in at least one case a para isomer is also formed. Sulfones of this type have been shown to possess potent anti‐HIV activity.     

Biparametric multicommutated flow analysis system for determination of human serum phosphoesterase activity

A multicommutated flow analysis (MCFA) system constructed of microsolenoid valves and pumps offering simultaneous determination of activity of acid phosphatase (ACP) and alkaline phosphatase (ALP) in human serum samples has been developed. The MCFA system is based on optoelectronic flow-through detector made of two light emitting diodes and operating according to paired emitter detector diode (PEDD) principle. This photometric PEDD device has been dedicated for detection of p-nitrophenol (NP) generated in the course of enzymatic hydrolysis of p-nitrophenyl phosphate and optimized for the determination of NP in human serum samples. The developed PEDD-based MCFA system allows independent optimization of conditions for reaction and detection steps of photometric ACP and ALP bioassays. Moreover, it allows elimination of photometric interferences from serum matrix components according to two-points kinetic mode of measurement. The single measurement cycle takes 12 min, consists of four measurements (two for each phosphoesterase) and enables determination of serum ACP and ALP activities at physiological and pathological levels. The real analytical utility of the developed MCFA system has been confirmed by analysis of control sera as well as real human serum samples from healthy persons and oncological patients.     

Performance Improvement of Acid Pretreated 3D-printing Composite for the Heavy Metal Ions Analysis

The performance enhancement of 3D-printed electrode comprised of polylactic acid (PLA) and graphite (Gr) doped with graphene oxide (GO) was studied to detect five heavy metal ions in trace level. The pretreatment of PLA/Gr/GO electrode with potential cycling in H₂SO₄ solution achieved the most sensitive response. The characteristics of the composite electrodes were verified using XPS, FE-SEM, EDXS, Raman, and impedance spectroscopy. The experimental variables affecting the response current were optimized with respect to pH, deposition time, ratio of PLA/Gr/GO, and supporting electrolytes. The pretreated 3D-PLA/Gr/GO electrode showed a wide dynamic range from 0.5 ppb to 1.0 ppm with low detection limits of 0.039–0.13 ppb. The reliability of the PLA/Gr/GO electrode was evaluated by analyzing the reference samples of European Reference Materials.     

Recent progress in nanomaterial-enhanced fluorescence polarization/anisotropy sensors

As a promising signaling transduction approach, fluorescence polarization (FP)/fluorescence anisotropy (FA), provides a powerful quantitative tool for the rotational motion of fluorescently labeled molecules in chemical or biological homogeneous systems. Unlike fluorescence intensity, FP/FA is almost independent the concentration or quantum of fluorophores, but they are highly dependent on the size or molecular weight of the molecules or materials attached to fluorophores. Recently, significant progress in FP/FA was made, due to the introduction of some nanomaterials as FP/FA enhancers. The detection sensitivity is thus greatly improved by using nanomaterials as FP/FA enhancers, and nanomaterial-based FP/FA is currently used successfully in immunoassay, and analysis of protein, nucleic acid, small molecule and metal ion. Nanomaterial-based FP/FA provides a new kind of strategy to design fluorescent sensors and establishes innovative analytical methods. In this review, we summarize the scientific publications in the field of FP/FA sensor in recent five years, and first introduce the recent progress of FP/FA sensor based on nanomaterial. Subsequently, the various analytical applications of FP/FA based on nanomaterial are discussed. Finally, we provide perspectives on the current challenges and future prospects in this promising field.     

Adsorption of CO gas molecules on zigzag BN/AlN nanoribbons for nano sensor applications

First-principle calculations have been performed to study the sensing of CO gas in various considered configurations. The adsorption of CO on zigzag BN nanoribbon (ZBNNR) and zigzag AlN nanoribbon (ZAlNNR) was modelled in five different possibilities. The effect of CO adsorption is to reduce the band gap in both types (BN/AlN) of the nanoribbons. Interestingly, a finite magnetic moment (0.96 ${\mu }_B$ for ZBNNR and 0.69 ${\mu }_B$ for ZAlNNR) has been obtained which depends upon the adsorption configuration of CO. Half-metallicity was also observed upon selective CO adsorption on ZAlNNR irrespective of the ribbon width. Present findings suggest that CO gas molecules could be detected through adsorption on BN/AlN nanoribbons via changes in electronic and/or magnetic properties.