Observation of inverse Meyer–Neldel rule in thermally activated crystallization of a hybrid composite of phenol formaldehyde

We report the inverse Meyer–Neldel (MN) rule in the thermally activated crystallization of a hybrid composite of phenol formaldehyde using two experimental approaches. In the first experiment, the annealing time dependence of the pre-exponential factor K ₀ and the activation energy of crystallization E _c were studied. In the second experiment, the annealing temperature dependence of the same parameters was investigated. We observed the inverse Meyer–Neldel rule between the pre-exponential factor K ₀ and the activation energy of crystallization E _c in both cases.     

Role of Ag addition in L10 ordering of FePt-based nanocomposite magnets

The FePt system has important perspectives as high-temperature corrosion-resistant magnets. In the form of rapidly solidified melt-spun ribbons, FePt-based magnets may exhibit in certain cases a two-phase hard–soft magnetic behaviour. The present paper deals with a microstructural and magnetic study of FePtAgB alloys with increasing Ag content. The aim is to identify and confirm the effect of Ag addition in decreasing the temperature of the FePt disorder–order structural phase transformation. A detailed high-resolution transmission electron microscopy study is employed, and the alternative disposal of hard and soft regions within the two-phase microstructure is observed and interpreted with respect to the X-ray diffraction results. In the as-cast Ag-containing samples, it is shown that there is an optimum of the Ag content for which best magnetic properties are obtained. Ag addition creates a nonlinear behaviour of the coercive field and the ordering parameter, similar to the RKKY interaction-induced interlayer exchange coupling (IEC) observed in magnetic layers separated by non-magnetic spacer layers. Direct formation of the L1₀ phase from the as-cast state in the FePtAgB alloys is reported with magnetic parameters compatible to other exchange spring permanent nanomagnets. These findings open novel perspectives into utilization of such alloys in applications requiring magnets operating in high-temperature industrial environments.     

Responsive core–shell microgels: Synthesis,characterization, and possible applications

Core–shell microgels are of increasing interest as smart carriers of catalysts, as sensors, or as building blocks for colloidal superstructures. In the context of colloidal assemblies, photonic applications are probably the most promising ones. This progress report presents and discusses the most recent results in this area focusing on the last 2–3 years, and also gives some background information. In addition, potential perspectives of this area will be outlined. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1073–1083     

基于双尺度渐近分析的有限元算法

1．引言正如文山所说，由于复合材料和周期结构的材料系数ail（x）在局部区域内间断且跳跃性很大，加上区域内含有周期性洞穴或裂缝，且周期长度很小．一般而言，直接采用有限元方法进行数值模拟，其计算量大得惊人，甚至难以实现．文山针对这种特征，提出了一种可计算的双尺度渐近分析模式，本文在此基础上给出了相应的有限元算法，它包括：1．周期解在一个基本构造上的有限元计算；2．边界层的有限元计算．同时，给出了相应的误差分析．2．周期解的有限元计算首先考虑下列形式的边值问题；其中把，代E尸（on叫，iii（0关于E—（EI，ZZ…     

车用摩擦材料的摩擦学研究进展

综述了当前有关摩擦材料的研究进展,重点论述了无机摩擦材料的摩擦学特点,指出了摩擦材料的几种不同磨损形式,提出了今后摩擦材料研究中几个值得重视的问题．     

简单的方法制备°-Fe2O3纳米粒子及其磁性质和电化学性质

报道了制备磁性Fe2O3纳米粒子的一种简单易行的方法．利用部分还原共沉淀法， 以Na2S2O4作为还原剂， 用FeCl3先制备出Fe2O3纳米微粒， 再在空气中直接煅烧， 成功地制备出粒径较均匀(约13 nm)的磁性Fe2O3微粒． 实验发现Na2S2O4在部分还原共沉淀法中起到了去氧剂兼还原剂的特殊作用．研究表明， 样品在室温下具有铁磁性， 其饱和磁化强度和矫顽力分别为70 emu/g和164 Oe； 产物具有好的电化学性质，在3.0?0.3 V(相对于金属锂)、0.2 mA/cm2时，样品的首次放电容量可达到933 mAh/g．同时还讨论了放电过程中金属锂与Fe2O3的反应机理．     

微波吸收法研究Mn,Cu掺杂对ZnS:Mn,Cu光生载流子复合过程的影响

采用微波吸收法，测量了ZnS:Mn,Cu粉末材料受到超短脉冲激光激发后，其光生电子和浅束缚态电子的衰减过程.发现Mn,Cu的浓度对导带电子的寿命有明显的影响，提高掺杂浓度会使光生电子的寿命大大缩短，还研究了掺杂浓度对光致发光强度的影响. 关键词： 发光材料 硫化锌 光电子 微波吸收技术     

共价有机框架材料在吸附领域的研究进展

共价有机框架材料(Covalent Organic Frameworks,COFs)是由有机结构单元通过共价键连接的具有期性结构的多孔化合物。共价有机框架材料具有永久的孔隙、高的比表面积、可调的孔径、易于功能化和高的水热稳定性等优点,广泛应用于许多领域。本文总结了COFs目前主要的合成方法,介绍了COFs在吸附领域的应用和发展。最后,文章指出未来的研究重点是发展更多有机反应和键连方式,合成具有高度稳定性和结晶度、成本低廉的功能性材料。     

Rapid Synergistic Extraction And Atomic Absorption Spectrometric Determination Of Iron In Environmental Samples Using Tributyl Phosphate And N-Phenyl-2-Furylacrylohydoroxamic Acid

Abstract

Iron (III) was rapidly extracted as its ternary complex with tributyl phosphate and N-phenly1-2-furylacrylohydroxamic acid (PFHA) from weakly acidic (pH 1.0-1.5) solutions into isobutyl methyl ketone and was determined atomic absorption spectrometrically. The method tolerated the presences of a large number of anions and cations commonly associated with iron, and was successfully tested with certified samples of coal fly ash, alloys, and plant tissues. It was also applied to the analysis of animal tissues, natural waters, and wastewaters; validating it by standard addition technique. PFHA was selected from nine new hydroxamic acids.     

On the redox reactions of radicals with AlIII(phthalocyaninate) pendants covalently bonded to poly(ethyleneamide). Mechanistic alterations when radicals are formed inside pockets of micelle‐like polymer aggregates

The mechanisms of the redox reactions between a polymer containing Al(III) sulfonated phthalocyanine pendants, (Al^III(^?NHS(O₂)trspc)^2?)₂, and radicals have been investigated in this work. Pulse radiolysis and photochemical methods were used for these studies. Oxidizing radicals, OH^?, HCO₃^?, (CH₃)₂COHCH₂^?, and N₃^?, as well as reducing radicals, e_aq^?, CO₂^??, and (CH₃)₂C^?OH, respectively accept or donate one electron forming pendent phthalocyanine radicals, Al^III(^?NHS(O₂)trspc ^?)^{? or 3?}. The kinetics of the redox processes is consistent with a mechanism where the pendants react with radicals formed inside aggregates of five to six polymer strands. Electron donating radicals, that is, CO₂^?? and (CH₃)₂C^?OH, produce one‐electron reduced phthalocyanine pendants that, even though they were stable under anaerobic conditions, donated charge to a Pt catalyst. While the polymer was regenerated in the Pt catalyzed processes, 2‐propanol and CO₂ were respectively reduced to propane and CO. The reaction of SO₃^?? radicals with the polymer stood in contrast with the reactions of the radicals mentioned above. A first step of the mechanism, the coordination of the SO₃^?? radical to the Al(III), was subsequently followed by the formation of a SO₃^?? ‐ phthalocyanine ligand adduct. The decay of the SO₃^?? ‐ phthalocyanine ligand adduct in a ～10² ms time domain regenerates the polymer, and it was attributed to the dimerization/disproportionation of SO₃^?? radicals escaping from the aggregates of polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012