Improved Calcium Ion-Selective Electrode Based on a Neutral Carrier

Abstract

The performance of a liquid-membrane electrode using a synthetic, neutral carrier in o-nitro-phenyl-n-octyl-ether as membrane component in a PVC matrix, in the presence of sodium tetra-phenyl-borate, is described. Selectivities, working range, lifetime and anion interference are discussed. The electrode makes possible the measurement of calcium ion activities in the range 10^?1M to 10^?6M in unbuffered and in the range 10^?1M to 10^?8M in calcium buffered systems respectively. The selectivities of calcium over protons, magnesium, sodium and zinc are 25,000, 26,000, 2,800 and 7,100, respectively, and are far superior than those reported for other calcium sensors.     

铜掺杂类金刚石纳米点阵列的制备及场发射性能研究

利用磁过滤等离子体结合氧化铝模板(AA0)技术在室温下制备了具有优异场发射性能的铜掺杂类金刚石(DLC)纳米点阵列.微观分析表明,铜掺杂类金刚石纳米点阵列分布均匀,密度高达109cm-2;利用X射线光电子能谱对制备的铜掺杂类金刚石纳米点阵列进行结构分析,测得铜的掺杂量为3.6;且sp3键含量高达60;;通过对铜掺杂类金刚石纳米点阵列的场发射性能测试,试验结果表明,铜掺杂类金刚石纳米点阵列开启电场和阈值电场分别为0.08V/μm,0.42V/μm,并且在电场值为0.67V/μm时,发射电流密度高达95mA/cm2,场发射性能明显优于无掺杂类金刚石纳米点阵列.     

Potentiometric and Thermodynamic Studies of Some Metal–Cysteine Complexes

A new and simple potentiometric method is developed to determine the stability constants of cysteine complexes with Mn(II), Cu(II), Zn(II), Cd(II), and Ce(III) metal ions using a modified Bjerrum method. Potentiometric titrations were performed in water and water/dioxane mixtures at five different temperatures. The least and highest stable complexes were those of Cu(II) and Zn(II), respectively. Furthermore, by conducting the experiments at temperatures of 15, 20, 25, 35, and 45 °C, the thermodynamic parameters ΔH°, ΔS°, and ΔG° for the pertinent complexes were calculated. The results show that the ΔH° values of the complexes are positive except for Zn(II). Negative values of ΔG° are evidence for the spontaneity of the reactions.     

Facile fabrication of novel cyclomatrix-type polyphosphazene nanotubes with active hydroxyl groups via an in situ template approach

Novel polyphosphazene nanotubes with active hydroxyl groups were fabricated via an in situ template approach under ultrasonic irradiation. SEM and TEM results indicated that the nanotubes were uniform with length of several micrometers, inner diameter of ca. 20 nm and outer diameter of 60-80 nm. FTIR spectra revealed that the content of the hydroxyl groups on the nanotube surface was dependent on the feed ratio of hexachlorocyclotriphosphazene (HCCP) to 4,4′-sulfonyldiphenol. The successful esterification of polymer nanotubes with benzoxy chloride demonstrated the high reactivity of the hydroxyl groups. The method employed here might provide a simple and effective way to prepare functional nanotubes used for biological applications.     

Carboxyl groups in pre-treated regenerated cellulose fibres

The influence of peroxide bleaching and slack-mercerization on the amount of acidic groups in regenerated fibres (viscose, modal and lyocell) were studied. Conductometric titration was used to determine the total content of acidic carboxylic groups. Polyelectrolyte titration was used for surface and total charge determination, and to obtain information about the charge distribution and accessibilities of charged groups. Changes in fibre crystallinity to pre-treatment processes were characterized using iodine sorption (Schwertassek method) and correlated to treatments and the amount of carboxylic groups. For all three types of fibres the amount of accessible carboxyl groups was lowered by an increase in the degree of crystallinity. Bleaching with hydrogen peroxide causes some oxidative cellulose damage and, therefore, a larger amount of carboxyl groups (presumably formed at the end of cellulose chains). Slack-mercerization did not significantly change the total amount of acidic groups in the fibres, but their accessibility to cationic polyelectrolytes, in particular to polymers with high molecular weight was substantially lowered. Lidija Fras Zemljič, Zdenka Peršin, and Karin Stana Kleinschek are the members of the European Polysaccharide Network of Excellence (EPNOE).     

Mesoporous carbon materials: synthesis and modification

Porous carbon materials are of interest in many applications because of their high surface area and physicochemical properties. Conventional syntheses can only produce randomly porous materials, with little control over the pore-size distributions, let alone mesostructures. Recent breakthroughs in the preparation of other porous materials have resulted in the development of methods for the preparation of mesoporous carbon materials with extremely high surface areas and ordered mesostructures, with potential applications as catalysts, separation media, and advanced electronic materials in many scientific disciplines. Current syntheses can be categorized as either hard-template or soft-template methods. Both are examined in this Review along with procedures for surface functionalization of the carbon materials obtained.     

恒电流库仑分析法测定青霉素G钠盐含量

将青霉素G钠盐在pH4．6条件下水解成青霉氨基酸;以银电极为阳极,电解产生滴定剂Ag^＋,以Ag^＋滴定青霉氨基酸,采用电位法确定库仑滴定终点,由电解定律计算青霉素G钠盐含量。此法取代了汞量法,消除了汞污染,相对误差为0．184%,RSD（n=11）为0．030％。     

Formation and characterization of mixed polyelectrolyte–surfactant Langmuir layer templates for silver nanoparticle growth

The hydrophilic characteristic of the polyelectrolyte, poly(4-styrenesulfonic acid) (PSS), was modified by associating with the surfactant, dodecyltrimethylammonium bromide (DTMAB), to form polyelectrolyte–surfactant (PSS–DTMA) Langmuir layers at air/liquid interfaces. The interfacial behavior of the PSS–DTMA complexes was investigated with the Langmuir trough technique. The mixed PSS–DTMA Langmuir layers were then used as the two-dimensional templates to incorporate with silver precursors from the subphase, and were transferred onto mica substrates with the Langmuir–Blodgett (LB) deposition technique. The silver nanoparticles were fabricated in the resulting LB films with UV irradiation, and the morphology of the silver nanoparticle structures was analyzed by atomic force microscopy (AFM). The results indicated that increasing the DTMA⁺ content in the mixed PSS–DTMA system would enhance the hydrophobic characteristic of the complexes and then form stable PSS–DTMA Langmuir layers at interfaces. In addition, by varying the DTMA⁺ content, one could adjust the charge density in the Langmuir layer templates and thus control the association behavior between the two-dimensional templates and the silver precursors in the subphases. The AFM images demonstrated that the formation of the silver nanoparticle structures in the UV-treated LB films could be regulated with the DTMA⁺ content in the Langmuir layer templates. It is inferred that the polyelectrolyte–surfactant template offers a potential of designing structures of polyelectrolyte–nanoparticle materials with a template-synthesis procedure.     

以醚胺为模板剂合成含二价金属杂原子的开放骨架磷酸铝化合物M(Ⅱ)-CJ50

在水热体系中, 以2,2'-(乙烯二氧)双(乙胺)为模板剂, 合成了3种含二价金属杂原子的开放骨架磷酸铝化合物M(Ⅱ)-CJ50(|C₆H₁₇N₂O₂| [MAl₃P₄O₁₆], 其中M=Mg, Mn和Fe). 单晶及粉末X射线衍射分析表明, 这3种化合物与以咪唑为模板剂合成的含三价金属杂原子的M(Ⅲ)-CJ50具有相似的骨架拓扑结构. 二者的区别在于: 由于使用了还原性较强的醚胺作模板剂, M(Ⅱ)-CJ50结构中的金属杂原子具有比M(Ⅲ)-CJ50更低的氧化态; M(Ⅱ)-CJ50中的金属杂原子与1个醚胺模板剂分子中的2个醚氧原子形成双齿配位, 而M(Ⅲ)-CJ50中的金属杂原子则与2个咪唑模板剂分别形成单齿配位. 此外, 磁性测试结果表明, 由于金属杂原子的氧化态以及配体模板剂分子的差异, 导致M(Ⅱ)-CJ50中的过渡金属杂原子处于电子高自旋态, 而M(Ⅲ)-CJ50中的杂原子则处于低自旋态.