Distributed strain measurement using a tellurite glass fiber with Brillouin optical correlation-domain reflectometry

A tellurite glass fiber with a high Brillouin gain was employed for distributed strain measurement with Brillouin optical correlation-domain reflectometry (BOCDR). First, the spatial resolution of BOCDR was evaluated using the tellurite fiber. With the high Brillouin gain of the fiber, it was confirmed clearly in the experiment that the spatial resolution is limited by the Rayleigh scattering-induced noise. Then, the dependence of the Brillouin frequency shift (BFS) on strain in the tellurite fiber was investigated, showing a negative dependence with a coefficient of −0.023 MHz/με. Using this tellurite fiber, the distribution of the BFS around a 1-cm strain-applied section was successfully measured with BOCDR of a nominal spatial resolution of 6 mm.     

Periodic intensity variations on the pulse-train of a passively mode-locked fiber ring laser

We investigate the evolvement of the periodic intensity variations of the pulse-train in a fiber ring laser mode-locked by the nonlinear polarization rotation technique. It is found that the phenomenon of such intensity fluctuations is related to the orientation of the polarization controllers when the pump power is fixed. The numerical results show that the mechanism of the periodic intensity variations is caused by the interaction of the nonlinear polarization rotation and the passive polarizer in the cavity.     

Third-order nonlinear optical studies of new anthraquinone derivatives

Four new donor-acceptor-donor anthraquinone derivatives were synthesized and characterized by UV, IR, ¹H NMR and elemental analysis. Their off-resonant third-order nonlinear optical properties were measured using femtosecond laser and degenerate four-wave mixing technique. The third-order nonlinear optical susceptibilities χ⁽³⁾ were 3.36-3.76 × 10⁻¹³ esu. The nonlinear refractive indexes n₂ were 6.19-6.91 × 10⁻¹² esu. The second-order hyperpolarizabilities γ of the molecules were 3.36-3.76 × 10⁻³¹ esu. The response times were 101-115 fs. The results show that these compounds have potential nonlinear optical applications.     

Studies on multi-wavelength fiber Bragg grating laser strain sensor

A novel stable multi-wavelength fiber Bragg grating laser is achieved and its sensing characteristic with the strain is studied. The beat signals generated by the multi-wavelength fiber laser are measured under different strains. Four-wave mixing (FWM) is firstly observed in such a short-cavity fiber laser.     

Entangled photon generation in a nonlinear microring resonator for birefringence-based sensing applications

This paper proposes a new concept of birefringence-based sensor using the entangled photon timing walk-off compensation. The superposition of nonlinear light known as four-wave mixing is introduced by the Kerr nonlinear effects type within the ring device. The possible two entangled photon pairs are randomly generated using the polarization control unit. Results obtained have shown that the entangled state walk-off of light traveling within the ring device can be compensated. This means the changes in walk-off parameters can be relatively measured to the changes in the applied physical parameters. The potential of using such a proposed system for birefringence-based sensor applications is plausible and discussed.     

High-speed transmission limitations due to Polarization Mode Dispersion

In this paper, the impacts of Polarization Mode Dispersion (PMD) on the performance of high-speed optical communication system have been reported at different bit rates. The two systems are modeled using older fibers with same PMD coefficient at different bit rates and third is with the new fiber with less PMD coefficient than that of the previous two. The attenuation, chromatic dispersion and non-linear effects have been disabled, so that all the variation of the results is due to PMD. The bit rate is varied from 2.5 to 40 Gbps and the length is varied from 1000 to 20,000 km. It is shown that the impact of PMD increases with the bit rate of system. It is also reported that the impact of PMD becomes intolerable at the bit rates of more than 40 Gbps. And also the PMD produces very minute impact on the system performance for same bit rate with the variation in the fiber length.     

Growth, thermal, optical and birefringence studies of semiorganic nonlinear optical thiosemicarbazide cadmium chloride monohydrate (TCCM) single crystals

A semiorganic nonlinear optical material (thiosemicarbazide cadmium chloride monohydrate) (TCCM) was synthesized and single crystals was grown from aqueous solution by slow evaporation method at ambient temperature. Crystal of average size up to 5×4×3 mm³ were harvested and characterized by powder X-ray diffractometry (XRD) and Fourier transfer infrared (FTIR) technique to confirm the identity of the compound formed. The thermal stability was analyzed by TG/DTA. The birefringence values (Δ_n) were determined in the wavelength region 540-6500 Å. The second harmonic generation (SHG) from the materials was confirmed using Nd:YAG laser.     

Analysis and optimization of optical bistability in one-dimensional nonlinear photonic crystal with (HL)(D)(LH) and (LH)(D)(HL) structures

Although one-dimensional nonlinear photonic crystal (1D-NPC) has been widely studied, there is no comprehensive analysis on decreasing the bistability threshold power.In this paper, conditions required to create bistability have been specified for two types of structures of alternative high and low refractive index layers and defect layers with Kerr nonlinearity effect, in the order of (HL)^p(D)^q(LH)^p and (LH)^p(D)^q(HL)^p, where L and H denote low and high refractive index layers, respectively, D stands for the defect layers, p is the number of LH or HL layers and q is the number of defect layers.One of the essentials for the bistability is appropriate shifts of frequency of the defect mode, so the effect of the order of layer's arrangement in (1D-NPC) structures have been studied. Different structures have been introduced and the best structure for the lowest bistability threshold power has been proposed. Nonlinear finite-difference time-domain (NFDTD) in C++ has been employed for simulation.     

Complex geometrical optics of Kerr type nonlinear media

The paper generalizes paraxial complex geometrical optics (PCGO) for Gaussian beam (GB) propagation in nonlinear media of Kerr type. Ordinary differential equations for the beam amplitude and for complex curvature of the wave front are derived, which describe the evolution of axially symmetric GB in a Kerr type nonlinear medium. It is shown that PCGO readily provides the solutions of NLS equation obtained earlier from diffraction theory on the basis of the aberration-free approach. Besides reproducing classical results of self-focusing PCGO readily describes an influence of the initial curvature of the wave front on the beam evolution in a medium of Kerr type including a nonlinear graded-index fiber. The range of applicability of the PCGO theory is discussed as well which is helpful for avoiding nonphysical solutions.