双-μ-氧代-、μ-氧-μ-硫代-和双-μ-硫代-双(半胱氨酸钼)络合物的合成与分离

对Schultz等的μ-氧-μ-硫代-双[(半胱氨酸)氧代钼酸]钠(2)和双-μ-硫代-双[(半胱氨酸)氧代钼酸]钠(3)的合成方法进行了改良。新方法的原料易得,步骤简便。发展了双-μ-氧代双[(半胱氨酸)氧代钼酸]钠(1)和2、3的纸层析分离、纤维粉柱层析和凝胶柱层析分离方法,可以获得纯度高的1、2和3。     

二维琼脂凝胶体系中过渡金属离子对草酸钙晶体生长和周期性沉淀的影响

在二维凝胶圆盘体系中,研究过渡金属离子对草酸钙晶体生长和周期性环状沉淀的影响,并对其形成机理进行探讨.结果表明:在一定浓度的Fe3 存在下,体系中出现了周期性环状沉淀现象.同时发现在此条件下抑制了一水合草酸钙(COM)晶型生成.此外,加入Zn2 、Co2 、Ni2 体系中的晶体都以二水合草酸钙(COD)为主;而加Cu2 离子的圆盘中,三水合草酸钙(COT)占据了主要的成分,这说明不同的过渡金属离子对三种草酸钙晶型的生成影响不同.另外,还对出现的与尿结石有关的特殊现象(白斑和放射状的条纹)进行了探讨.     

Reactions of Ru3(CO)12 with Ene-yne and Alkoxy-silyl Functionalized Compounds. The Crystal Structure of (μ-H)Ru3(CO)9[μ3-η2-HC=N(CH2)3Si(OEt)3]

Ru₃(CO)₁₂ has been reacted with the compounds hex-1-en-3-yne [EtC≡CCH=CH₂], 2-methyl-hex-1-en-3-yne [EtC≡CC(=CH₂)CH₃] and with 3(ethoxy-silyl)propyl isocyanate [(EtO)₃Si(CH₂)₃NCO] and the compound tb [(EtO)₃Si(CH₂)₃NHC(=O)OCH₂C≡CCH₂OC(=O)NH(CH₂)₃Si(OEt)₃] in hydrocarbon solution. Some reactions in CH₃OH/KOH solution (followed by acidification) have also been performed. The main products of the reactions with ene-ynes are the clusters Ru₃(CO)₆(μ-CO)₂L₂ (L = C₆H₈, C₇H₁₀) and their demolition products, the “ferrole” Ru₂(CO)₆L₂ complexes. One of the isomers of Ru₃(CO)₆(μ-CO)₂L₂, and Ru₂(CO)₆L₂ (L = C₇H₁₀) have been reacted with vinyl-triethoxysilane [(EtO)₃SiCH=CH₂]: these reactions did not afford complexes containing new carbon–carbon bonds or triethoxy-silyl groups. Only polymerization of vinyl-triethoxysilane occurred. The reactions of Ru₃(CO)₁₂ with triethoxysilyl-propyl-isocyanate and tb (in the presence of Me₃NO) lead to the same products, that is the isomeric complexes (μ-H)Ru₃(CO)₉[C=N(H)(CH₂)₃Si(OEt)₃] with a “perpendicular” ligand (complex 3, as proposed on the basis of spectroscopic results) and (μ-H)Ru₃(CO)₉[HC=N(CH₂)₃Si(OEt)₃] with a “parallel” ligand (complex 4, as confirmed by a X-ray analysis). The reaction pathways leading to these products are discussed. Complex 4 has been reacted with tetraethyl orthosilicate and the resulting material has been characterized. These reactions are part of a study on the synthesis of inorganic-organometallic materials through sol–gel techniques. This paper is dedicated to Prof. Gunther Schmid in the occasion of his 70th birthday.     

Antiwetting silica–gelatin nanohybrid and transparent nano coatings synthesised through an aqueous sol–gel process

Hydrophobic silica-biopolymer hybrid has been synthesised using colloidal silica as the precursor for silica, gelatin as the biopolymer counterpart and vinyltrimethoxysilane as the surface modifier through a sol–gel method. The precursor sol was coated on glass substrates and further investigated for the extent of chemical modification, thermal degradation, hydrophobicity, particle size and transparency in the UV-Visible region. Stereomicrographs clearly indicate the water repellent nature of the hybrid coatings with respect to a water drop. FTIR was used to follow the presence of vinyl groups that impart hydrophobicity to the resultant hybrids. By varying the concentration of functionalizing agent, the extent of hydrophobic property could been tailored. The optimum concentration for effective surface modification of the silica–gelatin hybrid is about 50 wt%. Nearly 100% optical transmittance was obtained for silica–VTMS–gelatin hybrid coatings on glass substrates and this may have potential applications in optical devices and also for transparent biocompatible hydrophobic coatings on biological substrates such as leather.     

TiO<Subscript>2</Subscript>-based nanopowders obtained from different Ti-alkoxides

Pure TiO₂ and S-doped TiO₂ sol–gel nanopowders were prepared by controlled hydrolysis-condensation of titanium alkoxides. The influence of different Ti-alkoxides (tetraethyl-, tetraisopropyl- and tetrabutyl-orthotitanate) used in obtaining TiO₂ porous materials in similar conditions (water/alkoxide ratio, solvent/alkoxide ratio, pH and temperature of reaction) has been investigated. The relationship between the synthesis conditions and the properties of titania nanosized powders, such as thermal stability, phase composition, crystallinity, morphology and size of particles, BET surface area and the influence of dopant was investigated. The nature of the alkyl group strongly influences the main characteristics of the obtained oxide powders, fact which is pointed out by thermal analysis, X-ray diffraction, TEM and BET surface area measurements.     

Carbothermal synthesis of ultra-fine zirconium carbide powders using inorganic precursors via sol–gel method

Ultra-fine zirconium carbide (ZrC) powders have been synthesized by carbothermal reduction reactions using inorganic precursors zirconium oxychloride (ZrOCl₂ · 8H₂O) as sources of zirconium and phenolic resin as the carbon source. The reactions were substantially completed at relatively lower temperatures (∼1400 °C/1 h) and the synthesized powders had a small average crystallite size (<200 nm) and a large specific area (54 m²/g). The oxygen content of the powder synthesized at 1400 °C/1 h was less than 1.0 wt%. The thermodynamic change process in the ZrO₂–C system and the synthesis mechanism were studied.     

Template synthesis of tin-doped indium oxide (ITO)/polymer and the corresponding carbon composite hollow colloids

SnO₂, In₂O₃, and Sn-doped In₂O₃ (ITO)/polymer and the corresponding carbon composite hollow colloids are template synthesized. It is essential that the sulfonated gel shell of the cross-linked polystyrene hollow colloid can favorably induce adsorption of target precursors. After being calcined in air to remove the template, SnO₂, In₂O₃, and ITO hollow colloids are obtained. Because the cross-linked polymer gel can be transformed into carbon in nitrogen at higher temperature such as 800 °C, metal oxide/carbon hollow colloids are consequently derived, whose shells are mesoporous. The SnO₂-, In₂O₃-, and ITO-containing polymer or carbon composite hollow colloids will be promising in sensors, catalysts, and fuel cells as electrode materials. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Synthesis,structural and electrical characterization of PbS NCs in titania sol–gel films

Nanocrystals of lead sulfide were grown in TiO₂ (titania) thin films prepared by a sol-gel process. The synthetic procedure as well as the structural, optical, and electrical properties of the films are demonstrated. The structures and morphology of PbS nanocrystals were analyzed using HRTEM, SAED, AFM, HRSEM, XRD and EDAX elemental analysis technique. When the concentration of PbS in the titania matrix is 20 mol%, PbS NCs with a diameter of 2.0 nm are created. At a higher PbS concentration (> 40 mole%) in the titania matrix, PbS NCs and PbS clusters are created not only within the TiO₂ film but also on the external surface of the TiO₂ film. By increasing the PbS concentration up to 50 mol%, PbS nanocrystals of 6–8 nm in diameter are formed within the titania film and PbS clusters with a base size of about 100 nm² and a height up to about 20 nm were self assembled on the external surface of TiO₂ film. Quantum size effect and band gap energies were obtained from shifts of the absorption edge. For electrical measurements, PbS–TiO₂ films were deposited on an ITO/glass substrate, and then covered with gold contact. The electrical properties of ITO/PbS NCs–TiO₂/Au and ITO/PbS NCs–TiO₂/PbS cluster/Au structures were studied. I–V characteristics of the one layer structure are nearly linear and symmetric, while those of the two-layer structure exhibit rectifying behavior.     

A novel template-free sol–gel synthesis of silica materials with mesoporous structures and zeolitic walls

Hierarchical porous materials with zeolite structures show great promise in catalysis due to combining the advantages of zeolites and mesoporous materials. Here a novel template-free sol–gel method is developed to synthesize hierarchical porous silica materials. This method involves solvothermal recrystallization of the xerogel converted from uniform silicalite-1 precursor sol via vacuum drying process. The zeolite sol and the solid samples were characterized by laser light scattering, XRD, N₂ adsorption/desorption isotherm, FTIR, SEM, TEM and thermal analysis technologies. The results show that we obtain two novel materials with different mesoporous structures and silicalite-1 walls by using different recrystallization media, one of which has irregular arrays of mesopores, the other possesses 3D wormhole mesoporous structure. We speculate that formation of different mesoporous structures results from different nucleation and growth process of materials