Adsorption of three selected flavonoids with humic fraction-modified silica gel in hexane: A mechanism study

Three selected flavonoids, commonly found in spices, red-purple fruits, and vegetables, were adsorbed on humic fraction-modified silica gel in hexane. The percentage of adsorption in hexane for all examined analytes was nearly 100% after 1 hr, as a result of the strong dipole–dipole interaction. The increasing amount of adsorbent involved in the process improved the percentage of adsorption, which in turn shortened the time needed to reach the maximum by providing more binding sites. However, adsorption was not observed in other liquid phases under the same conditions, such as acetonitrile and ethyl ether. The mechanism leading to the adsorption was explored chromatographically, as well as by fourier transform infrared spectroscopy (FTIR) and theoretical simulations.     

Enhancement of the catalytic performances and lifetime of Ni/γ-Al2O3 catalysts for the steam toluene reforming via the combination of dopants: inspection of Cu,Co, Fe,Mn, and Mo species addition

In this work, the influence of metallic dopant addition in 10 wt % Ni/γ-Al₂O₃ catalyst on the material physico-chemical properties and catalytic activity for the toluene steam reforming was studied. Seventeen doped Ni/γ-Al₂O₃ catalysts were synthesized by the sol–gel process. The aim of this study was to determine which elements were the most suitable for the doping of 10 wt % Ni/γ-Al₂O₃ catalysts. The influence of the dopants was studied through different physico-chemical techniques. It appeared that some dopants showed lower catalytic performances due to high carbon deactivation. On the contrary, some dopants increased the resistance to coking while also improving the catalytic activity. Different mechanisms were proposed to explain these modifications of catalytic behavior. Among all doped Ni/γ-Al₂O₃ catalysts, the samples that combined Mn + Mo or Co + Mo dopants showed the best catalytic performances at 650 °C. Both samples showed high toluene reforming activity and low amounts of carbon deposit.     

Uptake and Reduction of Arsenate by Dunaliella sp.

Uptake and reduction of arsenate [AS(V)] by Dunaliella sp. cells were determined to investigate the metabolic processes of arsenic in the alga. Cellular uptake of arsenic by Dunaliella sp. cells was markedly affected by the form of arsenic in the medium. The content of arsenic taken up by Dunaliella sp. cells increased rapidly with time on addition of As(V) to the medium. However, in the case of addition of arsenite [As(III)], the gradient of arsenic uptake by Dunaliella sp. cells was low, and arsenic content was small. In the water-soluble fraction of arsenic taken up by Dunaliella sp. cells with exposure to As(V), arsenic was in the forms of organic arsenic, As(V) and As(III). The content of As(V) in the water-soluble fraction increased with exposure time. The content of As(III) also increased with time, but remained constant after 5 h of exposure. On the other hand, organic arsenic content was small and did not increase with time. It was found that Dunaliella sp. takes up As(V) and readily reduces it to As(III)     

“Butterfly”-like patterns of triblock copolymer gels as observed by small-angle neutron scattering

At high (150-1000%) stretching of a physical gel of a triblock copolymer a “butterfly”-type scattering pattern is observed with a pronounced scattering-free strip perpendicular to the stretching direction. The phenomenon is attributed to the cluster character of the physical network in the gel. Stretching brings endblock domains (junction points of the network) closer to each other in the direction perpendicular to the stretching and leads to formation of a layered structure. High connectivity of the network inside the clusters leads to saturation of the deformation within the clusters as manifested by the scattering-free region in the SANS pattern. © 1996 John Wiley & Sons, Inc.     

凝胶色谱法测定顺丁橡胶平均分子量及其分布的研究

通过一系列的条件试验,包括样品浓度、样品量及流动相流速对柱效的影响,确定了最佳的凝胶色谱（ＧＰＣ）试验条件;采用普适校正法将聚苯乙烯（ＰＳ）标定曲线转换成顺丁橡胶（ＰＢ）标定曲线,并对Ｍａｒｋ－Ｈｏｕｗｉｎｋ方程式中Ｋ,α值的选择进行了讨论;采用４种分子量加宽方程对色谱柱加宽效应进行改正计算,通过比较,选定适合本试验系统的加宽效应的改正方法;用粘度法测得的顺丁橡胶特性粘度（η）吻合ＧＰＣ所测得特性粘度值,证明了方法的可靠性。     

Structure and catalytic activity of metal complexes fixed on carriers. Hydrodehalogenation of p-bromotoluene with chemically bonded hydrogen,catalyzed by immobilized rhodium(II) complexes

The structure of Rh(II) complexes with vigorous ligands immobilized on -aminopropyl-containing silicagel (-AMPS) and polymers containing 3(5)-methyl-pyrazole and imidazole groups, was investigated. It was shown by IR spectroscopy that the ligand surroundings are maintained after application only for the Rh(II) acetate complex. For the acetonitrile and hexafluoroacetylacetonate complexes there is a replacement of the ligands by amino groups of the carrier. [Rh₂(O₂CCH₃)₄] is significantly more active than other metal complexes immobilized on -AMPS in the hydrodehalogenation of p-bromotoluene by transfer of hydrogen from NaBH₄ and propanol-2.N. D. Zelinskii Institute of Organic Chemistry, Russian Academy of Sciences, 117913 Moscow. Translated from Izvestiya Akademii Nauk, Seriya Khimicheskaya, No. 1, pp. 65–70, January, 1992.     

Influence of Co–Zr substitution on coercivity in Ba ferrites

Polycrystalline BaCo_xZr_xFe_11.5−2xO_18.25 samples with 0?x?0.6$0?x?0.6$ ions per formula units were prepared by modified citrate precursor method with the initial ratio of Ba:Fe equal to 1:11.5. The cationic site preferences of Co²⁺ and Zr⁴⁺ in Co–Zr substituted Ba ferrite were investigated by magnetic measurements and X-ray diffractometer (XRD) analysis. The coercivity H_c was decreasing with increasing Co–Zr substitution. The datum showed that the max coercive force (H_c) was obtained when substitution of 0.2, while the best saturation magnetizations (M_s) was obtained when substitution of 0.4.     

Synthesis and electron paramagnetic resonance study of a nitroxide free radical covalently bonded on aminopropyl-silica gel

A solid spin-labeled material was obtained starting from 2-chloro-3,5-dinitro-N-(4-(2,2,6,6-tetramethyl-piperidine-1-oxyl)-benzamide) and aminopropyl-silica gel. Stability tests showed that even after several months the spin-labeled material had the same properties as immediately after synthesis. EPR properties of the TEMPO-derivatized silica were studied as a function of solvent polarity and temperature. Rotational correlation times were calculated from EPR spectra and correlated with solvent characteristics and temperature. Polar solvents induce a fast motion of the spin-label, clearly seen in the EPR spectra by the apparition of the well-known TEMPO radical triplet. The solid spin-labeled (dry) sample showed a high interspin interaction, which can be disrupted not only by different (liquid) solvents, but also by absorption of different solids, like cyclodextrins, dendrimers or polyethyleneglycols. Also, changes induced by the temperature were studied in the case of toluene wet sample. From 150 to 370 K, the spectrum is changing from a slow motion spectrum type to a fast motion regime. The preparative procedures to obtain the spin-labeled silica as well as some of its parameters are described.     

Freeze–Thaw-Promoted Fabrication of Clean and Hierarchically Structured Noble-Metal Aerogels for Electrocatalysis and Photoelectrocatalysis

Noble-metal aerogels (NMAs) have drawn increasing attention because of their self-supported conductive networks, high surface areas, and numerous optically/catalytically active sites, enabling their impressive performance in diverse fields. However, the fabrication methods suffer from tedious procedures, long preparation times, unavoidable impurities, and uncontrolled multiscale structures, discouraging their developments. By utilizing the self-healing properties of noble-metal aggregates, the freezing-promoted salting-out behavior, and the ice-templating effect, a freeze–thaw method is crafted that is capable of preparing various hierarchically structured noble-metal gels within one day without extra additives. In light of their cleanliness, the multi-scale structures, and combined catalytic/optical properties, the electrocatalytic and photoelectrocatalytic performance of NMAs are demonstrated, which surpasses that of commercial noble-metal catalysts.     

Bio‐based comb‐like copolymers derived from alkyl 10‐undecenoates and maleic anhydride

In this article, 10‐undecenoic acid, based on castor oil, was used a raw material for the synthesis of alternating copolymers. ω‐Unsaturated fatty esters as alkyl 10‐undecenoates were prepared by the esterification reaction of 10‐undecenoic acid with alkyl alcohol. A series of comb‐like copolymers were synthesized by free radical polymerization from maleic anhydride and alkyl 10‐undecenoates copolymers with different length of alkyl side chains in a toluene solution. These copolymers were investigated by ¹H and ¹³C nuclear magnetic resonance, Fourier transform infrared spectroscopy, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry (DSC). The copolymers were obtained in a low molecular weight in a range 3370–12,240 g mol⁻¹ and their structural characterization indicated the formation of alternating copolymers. DSC characterization revealed that these comb‐like copolymers showed amorphous to semicrystalline behavior by increasing the length of side chains. The bio‐based comb‐like copolymers allow for the development of new polymeric materials for several applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1039–1045