Effects of Calcination on the Physical and Photocatalytic Properties of TiO<Subscript>2</Subscript> Powders Prepared by Sol–Gel Template Method

TiO₂ powders were prepared by sol–gel template method and calcined under different conditions. XRD, BET and TEM were used to characterize the TiO₂ powders obtained. The photocatalytic activity of TiO₂ was investigated by the degradation of methyl orange. It was found that TiO₂ powder has the highest photocatalytic activity at a calcination temperature of 673 K. The effects of physical properties such as surface area, crystallinity and crystal phase on the photocatalytic activity of TiO₂ were discussed.     

Organic–inorganic nanocomposites prepared from fluoro-aramid and silica

Fluoro-aramid-based sol/gel-derived nanocomposites were synthesized by condensing a mixture of 4,4′-(hexafluoro-isopropylidene)dianiline and 1,3-phenylenediamine with terephthaloylchloride (TPC) in dimethylacetamide. TPC was added in slight excess to produce amide chains with carbonyl chloride end groups and then replaced with alkoxy groups using aminophenyltrimethoxysilane to develop bonding with the silica network. Mechanical, dynamic mechanical thermal, water absorption and morphological measurements were carried out on the thin hybrid films. Increase in the tensile strength and modulus was observed as compared to pristine polyamide. The thermal decomposition temperature was found in the range of 400–500 °C. The water absorption was found to be reduced with higher silica content. The glass transition temperature and the storage moduli increased with increasing silica concentration. The maximum increase in the T _g value (345 °C) was observed with 20 wt% silica. Scanning electron microscopy revealed the uniform distribution of silica in the matrix with an average particle size ranging from 8 to 50 nm.     

聚乙烯醇高含水胶固定化脲酶的研究

冷冻-部分脱水法制成的聚乙烯醇高含水胶固定化脲酶活力收率及对脲素的分解能力明显高于聚丙烯酰胺囱定化脲酶,稳定性相近;用低浓度的戊二醛后处理,提高了固定化酶的稳定性。     

柠檬酸铝/聚丙烯酰胺胶态分散凝胶反应动力学和机理的研究

采用粘度法研究了柠檬酸铝（AlCit)与部分水解取丙烯酰胺（HPAM）胶态分散凝胶体系的反应动力学。结果表明，胶态分散凝胶体系的交联反应是一级反应。并推导出胶态分散凝胶体系的反应动力学方程。     

以铜离子为模板的褐藻酸凝胶对铜离子的选择性富集研究

以铜离子为模板，制备了褐藻酸凝胶（Cu-alginate)，通过吸附实验及过柱渗滤实验，试验了该吸附剂对铜离子的选择性吸附性能，并且采用该吸附剂富集了自来水中微量的Cu^2 ，结合原子吸收法测定了水样中Cu^2 的含量。结果表明：该吸附剂对Cu^2 有较高的选择性吸附性能，显著优于一些化学合成铜离子模板缩聚物及非铜模板褐藻酸凝胶（如Ca-alginate),非重金属离子（如K^ 、Na^ 、Ca^2 ）及某些重金属离子（如Ni^2 、Cd^2 ）等对Cu^2 的吸附均不产生明显干扰。用该吸附剂富集水中的微量铜离子，回收率可达97.7%。     

Synthesis and characterization of hybrid borosiloxane gels as precursors for Si–B–O–C fibers

The sol–gel method has been used for the synthesis of borosilicate gels from mixtures of methyltriethoxysilane (MTES) and dimethyldiethoxysilane (DMDES) and boric acid. The use of boric acid, B(OH)₃ allows the hydrolysis and condensation of hybrid silicon alkoxides without further addition of water or catalyst. The use of difunctional silicon units, –(CH₃)₂SiO– promote the formation, during the sol–gel process, of linear oligomers which facilitate fiber drawing before gelation. Gel characterization performed by FT-IR, XRD, TG-DTA and DCS analysis indicates the formation of a mixed network with incorporation of the boron units via =B-O-Si≡ bridges. The formation of borosiloxane bonds seems favored by the presence of DMDES. SiBOC glasses were obtained after pyrolysis of the borosilicate gels in argon atmosphere at 1000 °C. TG-DTA study indicates that the ceramic yield decreases by increasing the amount of DMDES. Gel fibers were successfully prepared from convenient partially-aged solutions by hand drawing. Pyrolysis of the obtained gel fibers under argon atmosphere at 1000 °C open the possibility to produce SiBOC homogeneous glass fibers with diameter as low as 10 μm.     

Development of new solid-phase microextraction fibers by sol-gel technology for the determination of organophosphorus pesticide multiresidues in food

Allyloxy bisbenzo 16-crown-5 trimethoxysilane was first used as precursor to prepare the sol-gel-derived bisbenzo crown ether/hydroxyl-terminated silicone oil (OH-TSO) SPME coating. The coating procedure involving sol solution composition and conditioning process was presented. Compared with commercial SPME stationary phases, the new coatings showed higher extraction efficiency and therefore could provide higher sensitivity for organphosphorous pesticides (OPs). Limits of detection (LODs) were in the range of 0.003-1.0 ng/g for these OPs in food samples (honey, juice, orange and pakchoi). The optimal extraction conditions of the new coatings to OPs in these samples were investigated by adjusting extraction time, salt addition, extraction temperature, and dilution ratios of samples with distilled water by using SPME coupled with gas chromatography (GC)-flame photometric detection (FPD). The method was applied to determine the concentrations of OPs in real samples.     

A simple direct enzyme immunoassay of antibodies based on the differences in diffusion rates in a gel of a synthetic antigen and of its complex with antibodies

A simple direct enzyme immunoassay for semiquantitative detec tion of antibodies is suggested. It is based on the difference in diffusion rates in a gel for a synthetic low-mol-wt antigen and of its complexes with antibodies to be detected. Sensitivity and specificity of the devel oped assay are equal to an ELISA method. The assay has been tested with antibodies against HIV protein gp41 in rabbit serum. Possible applications and limitations of the method are discussed.     

碳氟链与碳氢链表面活性剂在固液界面上的吸附

全氟辛酸及其钠盐和十二烷基硫酸钠在R972上的吸附等温线均为S型或LS型，指示固液界面吸附过程中有表面疏水缔合物生成．碳氟表面活性剂的饱和吸附量显著高于碳氢表面活性剂的饱和吸附量．加电解质于液相使各体系吸附量上升．对于碳氟表面活性剂，甚至引起吸附等温线类型变化．例如，不加电解质时全氟辛酸在R972上的吸附等温线为S型，而加入HCl（c＝0．05mol·dm－3）使吸附等混线变成LS型．全氟辛酸比全氟辛酸钠在R972上的吸附更强．几种表面活性剂在R972上的吸附均随温度升高而减少。应用两阶段吸附模型及通用吸附等温线公式可以很好地解释所得实验结果．