Study of non-isothermal crystallization of amorphous Cu<Subscript>50</Subscript>Ti<Subscript>50</Subscript> alloy

The crystallization kinetics of amorphous Cu₅₀Ti₅₀ has been studied using differential scanning calorimetry (DSC) under non-isothermal conditions. The curves at different linear heating rates (2, 4, 8 and 16 K min^–1) show sharp crystallization peaks. The crystallization peak shifts to higher temperatures with increasing heating rate. The Kissingers method of analysis of the shift in the transformation peak is applied to evaluate the activation energy (E _c). The KJMA formalism, which is basically developed for isothermal experiments, is also used to obtain E _c and the Avrami parameter (n).The DSC data have been analysed in terms of kinetic parameters, viz. activation energy (E _c), Avrami exponent (n) and frequency factor K ₀ using three different theoretical models. It is observed that the activation energy values derived from KJMA approach and modified Kissinger equation agree fairly well with each other. The activation energy values obtained from normal Kissinger method, and Gao and Wang expression underestimate the activation energy.The financial support provided by All India Council for Technical Education (AICTE), New Delhi (Govt. of India) is gratefully acknowledged.     

A study of PBT/PC blends by modulated DSC and conventional DSC

Two poly(butylene terephthalate)/polycarbonate (PBT/PC) blends with different formulations were analyzed by modulated DSC (MDSC) and conventional DSC to determine differences in crystallization behavior. A significant difference (30°C in cold crystallization temperature) between the two samples was detectable by MDSC while no significant difference was seen by conventional DSC. That indicatesthe total heat flow from MDSC is not always equivalent to the heat flow from conventional DSC as we have assumed or seen before. The reason has not been fully understood, but may be related to unusual nucleation and crystallization induced by modulation. Alternative conventional DSC methods were developed and compared to the MDSC results.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThe authors like to thank Drs. Bernhard Wunderlich and Robert Gallucci for helpful discussion, David Shaker and Mary Parsonage for some DSC experiments. Technical support from TA Instruments is also greatly appreciated.     

热致型液晶聚合物的等温和非等温晶化动力学

利用等温和非等温方法详细研究了芳香族聚酯──热致型聚合物对，对’－联苯二甲酸二辛酯的结晶相和液晶相形成机理，并计算了相变过程中的表面自由能与温度系数，研究结果表明：从介晶相开始的结晶过程是二维异相成核、三维线性增长的，而从各向同性液相开始的液晶相形成过程则是二维异相成核二维线性增长的．对两个晶化过程的表面自由能的研究表明，该聚合物液晶相形成过程的相转变表面自由能比结晶过程小得多，预示了它将具有更大的晶化速率．研究还发现，该聚合物的液晶相形成过程具有比结晶过程大得多的温度敏感性．     

Synthesis and properties of new crystalline poly(arylene ether nitriles)

Crystalline poly(arylene ether nitrile) could be prepared by the polycondensation of 2,6-dihalobenzonitrile with resorcinol at 200°C in N-methylpyrrolidone in the presence of sodium carbonate. A reaction temperature of at least 200°C was necessary to attain high molecular weight polymer. Spectral data indicated that the polymer had the structure of a poly(meta-phenylene ether) with pendent nitrile groups on every other phenylene unit. Despite this structure, the crystallinity and the crystallization rate of the polymer were greater than those of the corresponding polymer with a para-linked structure. The glass transition temperature and the melting temperature of the polymer were almost the same as those of poly(etheretherketone) (PEEK^TM). A series of other new poly(arylene ether nitriles) were also examined. The polymers derived from 4,4′-biphenol, dihydroxytetra-phenylmethane, dihydroxydiphenylsulfone, and 1,5-isoquinolinediol had high glass transition temperatures. The poly(arylene ether nitriles) exhibited excellent tensile strength compared with the corresponding ketone- or sulfone-containing polymers. Comparing the three different kinds of polymers containing the same bisphenol units, the order of glass transition temperature was found to be sulfone- > nitrile- > ketone-containing polymers, while the order of tensile strength was nitrile- > ketone- > sulfone-containing polymers. The excellent mechanical properties are attributable to dipole-dipole interactions of nitrile groups. © 1993 John Wiley & Sons, Inc.     

超支化双亲水性嵌段共聚物对CaCO3结晶影响的研究

采用合成的聚乙二醇-超支化聚酯(PEG-hb-DMPA)的线性-超支化杂化二嵌段共聚物, 探讨了羧端基树状功能化的杂化嵌段共聚物对CaCO₃结晶的影响，并用FTIR、XRD、SEM等对产物进行了表征。结果表明，羧端基的双亲水性嵌段共聚物对CaCO₃结晶形貌乃至晶型均具有显著调控作用，比较高的浓度(1.67 g·L^-1, >10 min)或较低浓度作用较长时间(0.33 g·L^-1, 24 h)均得到了呈较均匀球粒形态的球霰石CaCO₃结晶。     

Preparation of Small Particle Sized ZnAl-Hydrotalcite-Like Compounds by Ultrasonic Crystallization

Ultrasonic technology has been intensively studied recently due to its special features. In this paper, an ultrasonic crystallization method was introduced for the preparation of ZnAl-Hydrotalcite-Like compounds (ZnAl-HTLcs). Samples with high crystallinity, small particle size and narrow particle size distribution were obtained and fully characterized using conventional techniques of XRD, FT-IR and TGDTA. The results prove that both ultrasonic frequency and ultrasonic power have effects on the sizes of the product particles. By varying the ultrasonic power from 250 W to 88 W, with the ultrasonic frequency fixed at 59 kHz, the median particle size of the samples increased from 0.37 μm to 0.82 μm. By altering the hydrothermal treatment time from 1 h to 5 h at 110℃, the median particle size of ZnAl-HTLcs synthesized via ultrasonic crystallization increased from 0.88 μm to 1.11 μm.     

Growth transition and morphology change in polypropylene

The growth rate of isotactic polypropylene is deduced from microscopic observations during isothermal crystallizations. A change in the growth regime is observed at 138 C and interpreted as a Regime III Regime II transition, according to Hoffman's kinetic theory of polymer crystallization. A Regime II Regime I transition is also theoretically predicted at 155 C, i. e. at a temperature outside the investigated temperature range. The Regime III Regime II transition is related to the positive to negative change in the spherulite birefringence, which is generally attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae atT _c < 138 C (Regime III) and preferentially radiating lamellae atT _c > 138 C (Regime II). It is suggested that such a morphological change could be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. This interpretation could also explain the interspherulitic ruptures observed in negative spherulites.     

高聚物非等温结晶动力学

由于等温ＤＳＣ法测定结晶动力学参数在实验上存在着一定的局限性，这些缺点可通过非等温ＤＳＣ法来克服。本文基于上述观点介绍了高聚物非等温结晶动力学的理论和实验方法，并对影响动力学过程的一些因素进行了讨论，对非等温结晶动力学的最新情况及发展倾向，应用情况作了介绍。     

Crystallization-induced asymmetric transformation of chiral-at-metal ruthenium(II) complexes bearing achiral ligands

Recently, we observed that the enantiopure Lambda form of the tributylammonium salt of the chiral anion tris[tetrachlorobenzene-1,2-bis(olato)]phosphate, also named Trisphat, was able to induce an efficient resolution of a Delta,Lambda racemic mixture of cis-[Ru(dmp)2(NCCH3)2](PF6)2 (dmp=2,9-dimethyl-1,10-phenanthroline) due to the spontaneous and selective precipitation of the heterochiral pair [Delta-Ru(dmp)2(CH3CN)2][Lambda-Trisphat]2. We report here that the combination of such a stereoselective precipitation process and irradiation results in the quantitative conversion of the initial [Ru(dmp)2(NCCH3)2]2+ racemate into only one of the two enantiomers. This is the first example in inorganic chemistry of an asymmetric transformation that leads to a chiral complex with no chiral ligand. Finally, three new racemic ruthenium bis(diimine) complexes, namely [Ru(dmp)2(NCCH3)Py](PF6)2 (Py=pyridine), [Ru(dmp)2(1,3-diaminopropane)](PF6)2, and [Ru(dmp)2(ethylenediamine)](PF6)2 were synthesized. For all of them, crystallization-induced asymmetric transformation proved to be an efficient way of obtaining the corresponding optically active chiral-at-metal complexes in high yields and with excellent stereoselectivities.     

Syntheses and properties of related polyoxadiazoles and polytriazoles

New aromatic poly-1,2,4-triazoles and poly-1,3,4-oxadiazoles are studied as thermally stable membrane materials. Various groups were introduced onto the pendant phenyl groups of poly-1,2,4-triazoles. Glass transition temperature, degradation temperature, and cold crystallization behavior were studied as a function of these groups. Cold crystallization appeared to be highly sensitive to macromolecular regularity. The solubility of poly-1,3,4-oxadiazoles was highly improved upon incorporation of 5-t-butylisophthalic, 1,1,3-trimethyl-3-phenylindane, 4,4′-(2,2′-diphenyl) hexafluoro propane, and diphenyl ether groups into the polymeric main chain, whereas the high glass transition temperatures and degradation temperatures typical for aromatic poly-1,3,4-oxadiazoles were maintained. © 1994 John Wiley & Sons, Inc.