Highly selective and efficient separations of a wide range of acidic species in capillary electrophoresis employing non-aqueous media

Summary The novel application of CE using non-aqueous media has been studied for the separation of a range of acidic compound types. This enabled the first quantitative assay by CE employing non-aqueous media to be performed. Separation selectivity manipulation for closely related species was achieved through variation of organic solvent types and composition, ionic strength changes, alteration of pH^* values and the addition of cyclodextrin additives soluble in organic solvents. This offers a greater range of possibilities during method development than use of aqueous buffer. The generation of low operating currents permitted rapid, highly efficient and selective separations to be achieved by applying high field strengths across short capillaries. Optimised rinsing and capillary regenerating procedures were devised which allowed highly repeatable separations to be achieved with migration time repeatability below 1% RSD. Use of internal standards also allowed 1% RSD values to be obtained for injection precision. Routine operating effects were assessed and it was observed that stacking effects remain important in non-aqueous CE. Also, optimal separations are obtained when the samples are diluted in the pure solvent used to prepare the electrolyte. The application range of non-aqueous CE was appreciably extended to include acidic drugs, dyes, surfactants and preservatives.     

Negishi Cross-Coupling Provides Alkylated Tryptophans and Tryptophan Regioisomers

Mild transition-metal catalysed cross-couplings enable direct functionalisation of biocatalytically halogenated tryptophans with alkyl iodides, representing a new alternative for late-stage derivatisations of halogenated aromatic amino acids. Moreover, this strategy enables preparation of (homo)tryptophan regioisomers in a simple two-step synthesis using a Pd-catalysed Negishi cross coupling. This method provides access to non-canonical constitutional surrogates of tryptophan, ready for use in peptide synthesis.     

Controlled Release of the Dithiocarbamate Ligand From A Polypyrrole Polymer. A Basis For On-Line Electrochemicalycontrolled Derivatisation

Abstract

The development of a novel on-line derivatisation scheme is described. the scheme involves use of a conducting polymeric material into which the derivatising agent is incorporated. the properties of the polymer enable electrochemical controlled release of the reagent into flowing solutions.     

非水体系中甲酸在铂电极上催化氧化的表面增强拉曼光谱研究

采用共焦显微拉曼系统研究了甲酸在非水体系中的纯多晶铂电极上的表面增强拉曼光谱,实验发现电位较低时甲酸首先在粗糙铂电极表面生成CO中间体,当电位逐渐变正并高于0.1 V时CO开始氧化,但是此时新生成的CO足以弥补其氧化的消耗,表现在Raman强度和一定覆盖度下的耦合作用并没有减少。当电位达到约0.6 V时CO的氧化速度进一步加剧并完全氧化为最终产物CO₂。     

The derivatization of fatty acids by (chloro)alkyl chloroformates in non-aqueous and aqueous media for GC analysis

Fatty acids can be conveniently derivatized in less than one minute with (chloro)alkyl chloroformates such as methyl chloroformate, 2-chloroethyl chloroformate and 2,2,2-trichloroethyl chloroformate. 2,2,2-Trichloroethyl chloroformate is the most reactive reagent, and yields a reaction product which can be sensitively detected by GC ECD (detection limit 50 ng/ml, i.e. 25 pg/injection, for C⁸, C¹⁰, and C¹² acids). In non-aqueous media 3-picoline, N-methylpiperidine, and dimethylaminopyridine show catalytic activity comparable with that of pyridine and can, therefore, replace it. N-methylpiperidine is the best basic catalyst in aqueous media (i.e. media containing up to 40 % water).     

Electrophoretic deposition of calcium phosphates from non-aqueous media

Electrophoretic deposition of ultrafine calcium phosphates from non-aqueous suspensions onto metallic substrates was attempted in order to obtain coatings with varying porosities. Aging effects were studied by measuring changes in the electrophoretic deposition behavior of the calcium phosphate particles in the non-aqueous suspensions. It was observed that the surfaces of the calcium phosphates develop significant electrostatic charge during aging in order to enable the formation of a dense and uniform deposit. The addition of surface charge conditioners such as HCl was found to have a similar effect. Dispersion conditions were varied to obtain coatings of the desired green densities, which were sintered to different microporosities.     

非水体系毛细管电泳-紫外检测法测定苯甲酸和苯甲醛

建立了用非水相体系高效毛细管电泳-紫外检测法同时测定苯甲酸和苯甲醛的新方法，考察了运行电压、非水相介质和电解质等因素的影响，在25℃下，以V（乙腈）：V（碳酸丙烯酯）=1：1的混合液为溶剂，缓冲体系中含15mmol／L十六烷基三甲基溴化铵体积分数1％乙酸，重力进样30S，运行电压20kV，毛细管总长45cm有效长度30cm，φ75μm，检测波长285nm。苯甲酸线性范围为5～40μg／mL，线性方程为：Y=13．473ρ＋13．336，相关系数r=0．9985，检出限为0．92μg／mL，RSD为3．8％。苯甲醛的线性范围75～1125μg／mL线性方程为：Y=5．2449ρ＋564．01，相关系数r=0．9997，检出限为15．60μg／mL，RSD为3．5％。已用于经空气氧化后的苯甲醛中苯甲酸和苯甲醛的测定。     

Water-dispersible non-aqueous emulsions stabilized by a poly(butadiene)-b-poly(2-vinylpyridine) block copolymer

Submicron non-aqueous emulsions, of interest for biomedical and cosmetic formulations, were developed for the system comprising poly(ethylene glycol) (PEG) 400 and Miglyol 812, an enzymatic degradable liquid glycerine ester. These emulsions, with PEG 400 as continuous phase and Miglyol 812 droplets, in the size range of 200 nm, were stabilized by a poly(butadiene)-b-poly(2-vinylpyridine) (PBut-b-P2VP) block copolymer with a composition close to 50/50 wt%. The droplet size, stability and the rheological characteristics were examined as a function of the copolymer concentration. An original aspect of these anhydrous emulsions, with a water miscible continuous phase, is their water dispersibility without additional surfactant. In fact, the initial anhydrous emulsion is sterically stabilized and after water addition at low pH, the protonated P2VP sequence of the copolymer provides the electro-steric stabilization. This oil-in-water emulsion is characterized by sub micron sized Miglyol 812 droplets in an aqueous phase of PEG 400 and water at pH 1.     

Research into conditions of quantitivity in the determination of carboniles in complex air matrices by adsorptive solid phase microextraction

This study focuses on certain aspects of the quantitivity of adsorptive solid phase microextraction when applied in the form of on-fibre derivatisation with O-(2,3,4,5,6)-pentafluorobenzyl-hydroxylamine hydrochloride (PFBHA) for the determination of carboniles in air samples of relevance in the atmosphere. The study was performed in the high-volume outdoor atmospheric simulation chambers (EUPHORE) located in Valencia (Spain). At short sampling times, the adsorption profiles obtained when only benzaldehyde was inserted in the chamber coincided with those obtained when other carbonylic compounds were also introduced at the same concentration, and this was also the case when the concentration of all the gaseous mixture components was increased considerably from one experiment to another. In a number of experiments applying different conditions, it was proven that all the extraction profiles belonged to the same regression when the fibre responses were plotted against the concentration-time product. A number of calibrations were obtained for benzaldehyde introduced in the chamber alone and in a mixture with three other carboniles at similar concentration values. A statistical test is applied to confirm that they all belonged to the same regression since they shared homogeneous variances. After these tests, the method of SPME on-fibre derivatisation for the determination of carboniles was considered to be safely applicable to quantification. Moreover, the concentration levels at which certain unwanted effects, i.e., displacement, saturation and competition, were observed are a few orders of magnitude higher than their occurrence levels in atmospheric processes.