Improvement in enzyme activity and stability by addition of low molecular weight polyethylene glycol to sodium bis(2-ethyl-L-hexyl)sulfosuccinate/isooctane reverse micellar system

The activity and stability of Chromobacterium viscosum lipase (glycerolester hydrolase, EC 3.1.1.3)-catalyzed olive oil hydrolysis in sodium bis (2-ethyl-1-hexyl)sulfosuccinate (AOT)/isooctane reverse micelles is increased appreciably when low molecular weight polyethylene glycol (PEG 400) is added to the reverse micelles. To understand the effect of PEG 400 on the phase behavior of the reverse micellar system, the phase diagram of AOT/PEG 400/water/isooctane system was studied. The influences of relevant parameters on the catalytic activity in AOT/PEG 400 reverse micelles were investigated and compared with the results in the simple AOT reverse micelles. In the presence of PEG 400, the linear decreasing trend of the lipase activity with AOT concentration, which is observed in the simple AOT reverse micelles, disappeared. Enzyme entrapped in AOT/PEG reverse micelles was very stable, retaining>75% of its initial activity after 60 d, whereas the half-life in simple AOT reverse micelles was 38 d. The kinetics parameter maximum velocity (V _max)exhibiting the temperature dependence and the activation energy obtained by Arrhenius plot was suppressed significantly by the addition of PEG 400.     

一步法合成吲哚用Ag／SiO2催化剂的失活及其抑制

 用简单浸渍法制备了Ag／SiO2催化剂．该催化剂对苯胺和乙二醇一步合成吲哚表现出很高的催化活性，但同时存在明显的失活．TG，XRD和TEM表征结果表明，催化剂失活的主要原因是反应过程中催化剂表面的积碳和银粒子的烧结．向反应体系中通入氢和水蒸气能够减少催化 剂表面的积碳；向催化剂体系加入ZnO助剂能较大程度地提高银的分散度，并能有效抑制反应过程中银粒子的烧结．     

ViscosityB-coefficients for lithium perchlorate in ethylene glycol-water mixtures

Viscosities and densities of lithium perchlorate solutions in different ethylene glycol-water compositions have been measured at 25.0 and 35.0 °C. From these data, the correspondingB-coefficients of theJones-Dole equation have been determined. TheB-value depends on the solvent composition and it reaches a maximum in the water-rich region. This behaviour is analysed in terms of ionic solvation and solvent structure.

---

Viskositäts-B-Koeffizienten für Lösungen von Lithiumperchlorat in Ethylenglykol-Wasser-Mischungen

Zusammenfassung Es wurden die Dichten und Viskositäten für Lösungen von Lithiumperchlorat in verschieden zusammengesetzten Ethylenglykol-Wasser-Mischungen bei 25 °C und 35 °C gemessen. Auf Grund der erhaltenen Daten wurden dieB-Koeffizienten in den entsprechendenJones-Dole-Gleichungen für die relative Viskosität bestimmt. DieB-Werte hängen von der Zusammensetzung des Lösungsmittels ab und erreichen im wasserreichen Konzentrationsgebiet ein Maximum. Dieses Verhalten wird in Hinblick auf die Ionensolvatation und die Struktur des Lösungsmittels analysiert.

     

Structure and properties of (1−x)(0.6Pb(Zn1/3Nb2/3)O3-0.4Pb (Mg1/3Nb2/3)O3)-xPbTiO3 thin films with perovskite phase promoted by polyethylene glycol

The preferential formation of a pyrochlore structure is a knotty problem in the preparation of Pb(Zn_1/3Nb_2/3)O₃ (PZN)-based thin film materials and its presence is significantly detrimental to the dielectric and piezoelectric properties. In this study, 40 mol% of PZN was replaced with Pb(Mg_1/3Nb_2/3)O₃ (PMN) for obtaining a perovskite composition around a morphotropic phase boundary (MPB), (1−x)(0.6PZN-0.4PMN)-xPT ((1−x)PZMN-xPT, PT: PbTiO₃) where x = 0.23. The thin films with this composition were prepared with a polyethylene glycol (PEG) modi-fied sol-gel method on LaAlO₃ substrates. The microstructural evolution of the films on heat treatment was examined with X-ray diffraction. With the aid of PEG, the formation of the pyrochlore phase was suppressed and the perovskite phase formed directly from the amorphous gel film. The multilayer films with a thickness around 0.25 μm showed a single perovskite phase without any detectable pyrochlore structure. Microscopic images showed uniform grain size of a few tens of nanometers. The role of the polymer dramatically promoting the perovskite phase was investigated with the aid of X-ray photoelectron spectroscopy and thermal analysis. The dielectric constant of the obtained film was 4160 at 1 kHz. The film demonstrated typical ferroelectric hysteresis loops and exhibited excellent piezoelectric performance.     

One-pot Synthesis of Isoxazolines Using Soluble Polymer-supported Acrylate

An eficient liquid-phase synthesis of isoxazolines through a 1,3-dipolar cycloaddition is described.Soluble polymer-supported acrylate reacted with nitrile oxides generated in-situ,followed by cleavage from the support giving corresponding isoxazolines in high yields and excellent purities.     

Liquid adsorption chromatography of polyethers: experiments and simulation

The adsorption behavior of poly(ethylene glycol) (PEG) in reversed-phase chromatography is studied both experimentally and theoretically and a computer simulation of chromatograms is performed on the basis of these studies. The experimental conditions were: different reversed-phase adsorbents and a solvent methanol–water system as the mobile phase. At varying mobile phase compositions highly resolved chromatograms of PEG samples were obtained, in which all peaks could be identified, and the dependencies of the distribution coefficient on the degree of polymerization for PEG molecules were evaluated by processing these chromatograms. The data were interpreted by using a theory of homopolymers based on a continuum Gaussian chain model of flexible macromolecules and a slit-like model of pores of stationary phase. The theory proved to describe well the experimental data in the whole range of studied molecular masses, and the thermodynamic parameters characterizing interactions of ethylene oxide repeating units in PEG molecules with the adsorbent pore walls have been determined from the comparison of the theory with the experimental data. The dispersion of chromatographic peaks corresponding to individual oligomer molecules is also estimated. In the system studied the peak width occurred to be proportional to the distribution coefficient of corresponding macromolecule. The theory is used to develop a computer-assisted procedure for simulation of chromatograms for samples of linear homopolymers. Using the obtained data on the thermodynamic parameters and the estimates of peak dispersion, chromatograms are simulated for PEG samples at two different chromatographic conditions. These simulated chromatograms were in good quantitative agreement with the real chromatograms.     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

Improving resins for solid phase synthesis: incorporation of 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene

The preparation, characterisation and application of a series of non-grafted polystyrene (PS) resins containing a styrenic methoxypoly(ethylene glycol) (MPEG) derivative is presented. These novel PS-MPEG resins were designed to balance swelling and solvation with improved handling. The monomer, 1-[2-(2-methoxyethoxy)ethoxy]-4-vinyl-benzene, contained an inert phenyl ether linkage designed to provide broad chemical compatibility and stability, yet imparting all the favourable properties of the PEG group into the new resin, whilst maintaining a high loading capacity. The synthetic performance of the new resins compared very favourably to those of TentaGel™, ArgoGel™ and aminomethyl PS.     

Synthesis of linear and starlike polymers from poly(propylene glycol) methacrylate using controlled radical polymerization

The copper‐catalyzed atom transfer radical polymerization (ATRP) of poly(propylene glycol) methacrylate (PPGM) in solution to produce linear and starlike polymers is reported, using methylethyl ketone as the solvent and a temperature of 80 °C. The ATRP system used was efficient for polymerization of the functionalized monomer without protecting hydroxyl end groups of monomer. The polymerizations were consistent with “living” or controlled processes, as revealed by the linear evolution of molecular weight with conversion. Increasing the [M]₀:[I]₀ ratio resulted in increasing molecular weights, whereas the polydispersity indices remained low (M_w/M_n < 1.4) even at high conversion. Decreasing the [CuBr]₀:[I]₀ ratio resulted in lower conversions, slightly larger polydispersities, and decreased molecular weights, likely resulting from a lower initiation efficiency. Polymers were characterized by ¹H and ¹³C NMR; molecular weights of polymers with low degrees of polymerization were estimated by end‐group analysis from ¹³C NMR spectra obtained using distortionless enhancement by polarization transfer and the gated decoupling techniques. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 334–343, 2002     

Viscoelastic properties of single poly(ethylene glycol) molecules.

The viscoelastic properties of single poly(ethylene glycol) (PEG) molecules were measured by analysis of thermally and magnetically driven oscillations of an atomic force microscope (AFM) cantilever/molecule system. The molecular and monomer stiffness and friction of the PEG polymer were derived using a simple harmonic oscillator (SHO) model. Excellent agreement between the values of these two parameters obtained by the two approaches indicates the validity of the SHO model under the experimental regimes and the excellent reproducibility of the techniques. A sharp minimum in the monomeric friction is seen at around 180 pN applied force which we propose is due to a force induced change in the shape of the energy landscape describing the conformational transition of PEG from a helical to a planar state, which in turn affects the timescale of the transition and therefore modifies the measured internal friction. A knowledge of the viscoelastic response of PEG monomers is particularly important since PEG is widely used as a linker molecule for tethering groups of interest to the AFM tip in force spectroscopy experiments, and we show here that care must be exercised because of the force-dependent viscoelastic properties of these linkers.