Hexagonal La2O3 Nanocrystals Chemically Coupled with Nitrogen-Doped Porous Carbon as Efficient Catalysts for the Oxygen Reduction Reaction

The construction of nano-scale hybrid materials with a smart interfacial structure, established by using rare earth oxides and carbon as building blocks, is essential for the development of economical and efficient catalysts for oxygen reduction reactions (ORRs). In this work, hexagonal La₂O₃ nanocrystals on a nitrogen-doped porous carbon (NPC) derived from crop radish, served as building bricks, are prepared by chemical precipitation and then calcination at elevated temperatures. The obtained La₂O₃/NPC hybrid exhibits a very high ORR activity with a half-wave potential of 0.90 V, exceeding that of commercial Pt/C (0.83 V). Both DFT theoretical and experimental results have verified that the significantly enhanced catalytic performance is ascribed to the formation of the C−O−La covalent bonds between carbon and La₂O₃. Through the covalent bonds, electrons can transfer from the carbon to La₂O₃ and occupy the unfilled e_g orbital of the La₂O₃ phase. This results in the accelerated adsorption of active oxygen and the facilitated desorption of the surface hydroxides (OH_ad⁻), thereby promoting the ORR over the catalyst.     

Quantum mechanical modeling of Zn-based spinel oxides: Assessing the structural,vibrational, and electronic properties

The structural, electronic, and vibrational properties of two leading representatives of the Zn-based spinel oxides class, normal ZnX₂O₄ (X = Al, Ga, In) and inverse Zn₂MO₄ (M = Si, Ge, Sn) crystals, were investigated. In particular, density functional theory (DFT) was combined with different exchange-correlation functionals: B3LYP, HSE06, PBE0, and PBESol. Our calculations showed good agreement with the available experimental data, showing a mean percentage error close to 3% for structural parameters. For the electronic structure, the obtained HSE06 band-gap values overcome previous theoretical results, exhibiting a mean percentage error smaller than 10.0%. In particular, the vibrational properties identify the significant differences between normal and inverse spinel configurations, offering compelling evidence of a structure-property relationship for the investigated materials. Therefore, the combined results confirm that the range-separated HSE06 hybrid functional performs the best in spinel oxides. Despite some points that cannot be directly compared to experimental results, we expect that future experimental work can confirm our predictions, thus opening a new avenue for understanding the structural, electronic, and vibrational properties in spinel oxides.     

Improved photoelectrochemical hydrogen production over decorated titania with copper and nickel oxides by optimizing the photoanode and reaction characteristics

We optimized photocatalytic hydrogen production over TiO₂-based photocatalyst by varying the dopant (nickel and copper oxide), thin film active area, nature and concentration of sacrificial agents, and light intensity in a photoelectrochemical (PEC) cell/dye-sensitized solar cell (DSSC). Various characterization techniques have been used to investigate the structural, morphological, optical, and PEC behavior of single and codoped TiO₂. The TiO₂ decorated with both Cu and Ni oxides with active area of 1 cm² in a mixture of 5 vol % glycerol and 1 M KOH under light intensity of 100 mWcm^?2 produced the maximum hydrogen of 338.4 μmol cm^?2 for 2 h. The superior photocatalyst performance of this photocatalyst is attributed to its small crystallite size and large pore size, as confirmed by X-ray diffractometer, Transmission electron microscopy (TEM), and surface area of Brunauer-Emmet-Teller (S_BET). The absorption edges of this photocatalyst had the highest red shift compared with single doped and pure TiO₂ because of more indirect transitions of the photoexcited electrons, greater charge carrier separation, and lower recombination rate. The photoanode active area of 1 cm² with better photocatalytic performance correlated with the number of defects and grain boundaries. Glycerol shifted the conduction band of the photocatalyst to more negative flat potential compared with others. Increasing the concentration of glycerol further than 5 vol% saturated the photocatalyst active sites, increased photooxidation intermediates of glycerol, and reduced the hydrogen production. The light intensity had the maximum impact on the hydrogen production and could strongly control the number of charge carriers in both the PEC cell and the DSSC.     

First principles study of Ca in BaTiO3 and Bi0.5Na0.5TiO3

BaTiO₃–Bi_0.5Na_0.5TiO₃ is one of the promising candidates as a high-temperature relaxor with a high Curie temperature and several preferred dielectric characteristics. It has been found experimentally for a long time that adding calcium to BaTiO₃–Bi_0.5Na_0.5TiO₃ improves its temperature characteristic of the capacitance [J. Electron. Mater. 39, 2471]. In this study, Calcium (Ca) defects in perovskite BaTiO₃ and Bi_0.5Na_0.5TiO₃ have been studied based on first-principles calculations. In both BaTiO₃ and Bi_0.5Na_0.5TiO₃, our calculations showed that Ca atom energetically prefers to substitute for the cations, that is Ba, Bi, Na and Ti, depending on the growth conditions. In most cases, Ca predominantly substitutes on the A-site without providing additional electrical carriers (serve as either neutral defects or self-compensating defects). The growth conditions where Ca can be forced to substitute for B-site (with limited amount) and the conditions where Ca can be forced to serve as an acceptor are identified. Details of the local structures, formation energies and electronic properties of these Ca defects are reported.     

化学发光法大气氮氧化物浓度自动分析仪中光信号探测模块温控系统设计

化学发光法是测量低浓度的大气氮氧化物含量的有效方法,可用于24h连续自动分析的大气环境监测系统。然而该方法需要高温转换室、高压臭氧发生模块、高温反应室等模块,使得仪器内的环境分布极为复杂,仪器在长时间运行后容易出现灵敏度下降、信噪比降低等现象。针对上述现象,设计了用于仪器的光信号探测模块的温度控制系统。该温控系统基于PID控制原理,通过AVR单片机ATMEGAl6对半导体制冷片（Ther—mo—ElectricCooling,TEC）的闭环控制来实现温度的精密控制。实验结果表明,该系统可以使光信号探测模块的温度控制在5℃±0．1℃,光电倍增管的暗噪声从25℃时的363个／s下降到5℃时的8个／s光子数,噪声波动标准差也从22降到3,能够很好地满足系统对信号探测稳定性的要求。     

Enhancement of the molecular nitrogen dissociation and ionization levels by argon mixture in flue nitrogen plasma

In this work, the nitrogen molecular dissociation and ionization levels in Ar/N₂ flue plasma are evaluated as functions of plasma parameters such as Ar mixture quantity and N₂ flux in order to obtain the best condition for various applications such as thin film deposition and material surface modification. This plasma is operated at 10 kV and the nitrogen dissociation rate is determined by analyzing the optical emission of the nitrogen band. For different operating conditions, the dissociation rate [N] of N₂ molecules was enhanced, as the mixture quantity of Ar increased from 0.06 m³/h to 0.9 m³/h and the max of enhancement factor is 4.3. This factor becomes bigger when the N₂ flux becomes bigger. Moreover, the molecular nitrogen ionization density is calculated from the current intensity of the plasma. The ionization density was also enhanced, as the mixture quantity of Ar increased from 0.1 m³/h to 1.5 m³/h, under three different voltages. The max of enhancement factor of 1.96 is much smaller than the factor of the dissociation rate. These results are discussed in terms of the kinetics of the electrons, nitrogen ions, atoms and molecules.     

Structures and stability of N9, N9 − and N9 + clusters

 Ab initio molecular orbital calculations for N₉, N⁻ ₉ and N⁺ ₉ isomers were carried out at the HF/ 6-31G*, B3PW91/6-31G*, B3LYP/6-31G* and MP2/ 6-31G* levels of theory. Stable equilibrium geometric structures were determined by harmonic vibrational frequency analyses at the HF/6-31G*, B3PW91/6-31G* and B3LYP/6-31G* levels of theory. The most stable free-radical N₉ cluster is structure 1 with C _{2 v} symmetry and that of anion N⁻ ₉ is structure 3 with C _s symmetry. Only one stable structure of the N⁺ ₉ cation with C _{2 v} symmetry was predicted. Their potential application as high-energy-density materials has been examined. Received: 15 June 1999 / Accepted: 11 October 1999 / Published online: 14 March 2000     

CVD synthesis of nitrogen doped carbon nanotubes using ferrocene/aniline mixtures

Nitrogen doped carbon nanotubes (N-CNTs) have been synthesized by the chemical vapour deposition (CVD) floating catalyst method using either 4-ferrocenylaniline or mixtures of varying concentrations of ferrocene/aniline together with toluene as added carbon source. The N-CNTs produced are less stable (thermal gravimetric analysis measurements), less graphitic and more disordered (transmission electron microscope measurements) than their undoped counterparts. The ratio of the Raman D- and G-band intensities increase with the nitrogen concentration used during the CNT growth. Furthermore, the transmission electron microscope (TEM) studies reveal that the CNTs are multi-walled (MW), and that the diameters of the N-MWCNTs can be controlled by systematically varying the concentrations of the nitrogen source. The TEM analysis also revealed that when ferrocenylaniline and ferrocene/aniline reactions are compared at similar Fe/N ratios, higher N doping levels are achieved (ca. 2-5×) when ferrocenylaniline is the catalyst.     

Monitoring of NO2 in the ambient air with passive samplers before and after a road reconstruction event

Nitrogen dioxide (NO₂) concentrations were used to evaluate the air quality before and after the infrastructural change of an important traffic artery in Mortsel, Antwerp (Belgium). During the reconstruction works two pairs of traffic lanes were reduced to one in each direction. Two sampling campaigns were conducted: the first one before the works in 2003 and the second one in 2005, after the road works were finished. Sampling was performed on a weekly base with the use of passive diffusion tubes on the streets, and also indoors in nearby houses. The samples were analyzed by ion chromatography, from which data the NO₂ concentrations in air could be calculated. These results were compared with NO₂ values from the air monitoring station 42R801 of the Flemish Environment Agency in Borgerhout, Antwerp. On the base of different NO₂ concentrations, correlated well with the traffic density, sampling locations were classified into three groups as follows: 1) ‘heavily polluted’ (heavy traffic); 2) ‘moderately polluted’ (medium traffic); or 3) ‘less polluted’ (low traffic density). Sampling sites located further from the road works, enclosed to the group ‘less polluted’, showed the lowest NO₂ concentrations. The highest NO₂ level was found for the locations close to reconstruction works, which belonged to the group ‘heavily polluted’. The contribution of NO₂ was at the same level before and after the road works. During the first campaign it ranged from 30 ± 7 µg/m³ to 71 ± 11 µg/m³ and during the second sampling it was between 36 ± 17 µg/m³ and 73 ± 17 µg/m³. These modernization works had no impact on preventing the traffic-related pollutant as NO₂ and as a consequence no significant effect on the air quality in the studied region. It has been proven that the impact of traffic on the air quality is unmistakably high and simply reduction of the number of the traffic lanes, intended to discourage the traffic flow, had apparently no environmentally advantageous effect.     

Effect of the nature of the support for copper-cerium oxide catalysts on selective oxidation of CO in hydrogen-rich mixtures

We have studied the catalytic properties of copper-cerium oxide catalysts, supported on zirconium, aluminum, titanium, and manganese oxides, in the reaction of selective oxidation of CO in hydrogen-rich mixtures. We have shown that the high activity and selectivity of catalysts supported on zirconium and aluminum oxides is connected with the presence of (in addition to divalent copper) higher amounts of copper in the (+1) oxidation state in the catalysts. __________ Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 42, No. 2, pp. 119–124, March–April, 2006.