Joule–Thomson inversion curves of mixtures by molecular simulation in comparison to advanced equations of state: Natural gas as an example

Molecular modelling and simulation as well as four equations of state (EOS) are applied to natural gas mixtures regarding Joule–Thomson (JT) inversion. JT inversion curves are determined by molecular simulation for six different natural gas mixtures consisting of methane, nitrogen, carbon dioxide and ethane. These components are also regarded as pure fluids, leading to a total of 10 studied systems. The results are compared to four advanced mixture EOS: DDMIX, SUPERTRAPP, BACKONE and the recent GERG-2004 Wide-Range Reference EOS. It is found that molecular simulation is competitive with state-of-the-art EOS in predicting JT inversion curves. The molecular based approaches (simulation and BACKONE) are superior to DDMIX and SUPERTRAPP.     

Anodic behavior of nickel-based alloys in the electrolytic production of NF3

The Ni-based alloys, such as Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si, prepared by hot isostatic pressing (HIP) at 1000 °C under 2 × 10⁸ Pa for 2 h were employed as the anodes for electrolytic production of NF₃. The current efficiencies for NF₃ formation were 42-38, 52-40, 52-47, 63-62, 50 and 41% for Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloys, respectively. The current efficiencies only on Ni-Cu alloys with Cu concentrations lower than 10 mol% were almost the same as those on Ni sheet and HIPed Ni anodes, whereas those on the other alloys used in this study were smaller compared with those on both Ni anodes. On the other hand, the current losses caused by anodic dissolution of Ni-Co, Ni-Mn, Ni-Ag, Ni-Cu, Ni-Al and Ni-Si alloy electrodes were 7.95-4.42, 6.40-7.02, 5.60-6.30, 3.34-6.33, 5.10 and 0.18%, respectively. The anode consumptions of Ni-5 mol% Cu and Ni-5 mol% Si alloys were almost the same or smaller compared with those of Ni sheet and HIPed Ni electrodes, though those of other alloys used were large compared with those of both Ni anodes. Consequently, addition of Cu to the nickel matrix is available for a cheaper cost of anode with keeping a same current efficiency as that on the Ni anode and addition of Si to the nickel matrix is effective for decreasing anode consumption largely. A Ni sheet electrode containing a trace of impurities, such as Co, Mn, Ag and Al, is also favorable as the anode for electrolytic production of NF₃.     

Asymmetric synthesis of 1-substituted-1-(pyridin-2-yl)methylamines by diastereoselective reduction of enantiopure N-p-toluenesulfinyl ketimines

Reduction of enantiopure N-p-toluenesulfinyl ketimines derived from 2-pyridyl ketones affords N-p-toluenesulfinyl amines with good yields and diastereoselectivities.     

Convergence of the density functional one-centre expansion for the molecular continuum: N2 and (CH3)3N

A large-scale one-centre expansion with a radial B-spline basis set is implemented for bound and continuum states. A Kohn-Sham hamiltonian is employed with Hartree and exchange-correlation potentials calculated from the SCF electron density taken from a previous LCAO calculation. An inverse iteration method is used to obtain the continuum wavefunction, from which the cross section and asymmetry parameter are calculated. The convergence with respect to angular momentum and cut-off radius is analysed for N₂. The relevance of multipolar contributions even at large distances is shown and suggestions for further improvements are given. In order to show that the present method is suitable to treat systems of moderate size, the (CH₃)₃N molecule has also been calculated and the results are compared with experiment. Received: 19 May 1998 / Accepted: 20 August 1998 / Published online: 7 December 1998     

Evaluation of sample treatment procedures for the routine identification and determination at nanogram level of O6-monoacetylmorphine in urine by capillary GC and dual NPD-FID

Three methods were evaluated for the determination of O⁶-monoacetylmorphine (6-MAM), the specific metabolite of heroin in human urine, by GC-NPD-FID. The procedure devised for a hydrophobic cation exchange column showed superior performances over the liquid-liquid extraction technique and solid phase extraction with C₁₈. 6-MAM can be analyzed in random urines at the 2 ng/mL concentration with classical equipment for the differentiation between heroin intake and opiates from various origins. The procedure was also applied to enzymatic and acid hydrolyzates of urines. The simultaneous presence of morphine and codeine are useful in the interpretation of results.     

Flow-injection determination of inorganic forms of nitrogen by gas diffusion and conductimetry

A flow-injection—conductimetric method was applied to the determination of ammonia, nitrate and nitrite at concentrations down to 5, 20 and 20 ng ml^?1, respectively. Ammonia was determined by merging the injected sample with an alkaline solution (NaOHEDTA) and passing the mixture through a diffusion cell. The ammonia released was collected by a flowing stream of deionized water that passed through a conductance flow cell. Nitrate and nitrite concentrations were determined after reduction to ammonia in alkaline medium using a column filled with metallic zinc. The ammonia produced was then measured as described above. About 60 samples per hour can be processed with a relative standard deviation of about 1%. Satisfactory agreement was observed between results for ammonia in samples of natural water and nitrate in tap and mineral water determined by the proposed method and by standard spectrophotometric procedures. Speciation can be achieved by adding sulphanilic acid to remove nitrite from the sample and determining the ammonia without the use of the column.     

Vapor-liquid equilibria for the nitrogen-isobutane system

Vapor-liquid equilibria have been investigated experimentally for the nitrogen-isobutane system at temperatures from 120 K to 220 K and at pressures up to 150 bar. Below 126.5 K, two liquid phases were observed as pressure was increased to near the vapor pressure of pure nitrogen. The equilibrium ratio of nitrogen in the binary system and the Henry’s law constants for nitrogen in isobutane were determined from experimental data. The experimental phase equilibrium data were correlated by means of the Peng-Robinson equation of state.     

分光光度法测定吸收液中二氧化氮的质量控制

探讨了分光光度法测定吸收液中二氧化氮,采用盲样与已知标准样品进行比对,结果表明,该法符合质量控制要求,并对可能影响质控结果的因素进行了讨论。     

The adsorption and decomposition of NO on Pd(110)

The sticking probability of nitric oxide (NO) on Pd(110) and the relative selectivity of the surface to nitrogen (N₂) and nitrous oxide (N₂O) production has been measured as a function of coverage and as a function of surface and gas temperatures using a molecular beam. It is found that, at low temperatures (<440 K), molecular adsorption occurs with an initial sticking probability of 0.40 ± 0.02, rising quickly to a maximum of about 0.48 ± 0.02 as coverage increases before falling towards saturation. Following adsorption at 170 K four distinct adsorption sites can be identified by subsequent TPD. Hence, if beaming occurs at a temperature above the TPD peak due to a given site, then that site cannot be populated and the saturation coverage is found to be reduced. At higher temperatures (440–650 K) the sticking probability is seen to decrease continuously as a function of coverage. At a given NO uptake, the sticking probability falls with temperature indicating that the rate of NO desorption is significant in this temperature range. In addition, dissociation occurs leading to the desorption of nitrogen and nitrous oxide leaving only oxygen adatoms on the surface. The oxygen adatoms poison further reaction but can be cleaned off, even at the lowest temperature at which dissociation occurs, by hydrogen or carbon monoxide. At the low temperature end of this range more nitrous oxide is produced than nitrogen but this ratio falls with temperature until, above 600 K, there is 100% selectivity to the production of nitrogen which we propose is due to the low lifetime of molecular NO on the surface. However, at such high temperatures, reaction only occurs on a few sites probably located at the few step edges present on the crystal.     

Synthesis of nitrogen doped graphite oxide and its electrochemical properties

We herein report a synthesis nitrogen-doped graphite oxide (N-doped GO) by heat treatment with melamine. The N-doped GO contains 4 at % of nitrogen, incurring the oxygen reduction reaction by nitrogen functional groups. Two kinds of aqueous electrolytes are used for finding the electrocatalytic activities, resulting in symmetric oxygen reduction reaction peaks at −0.8 and 0 V in 6 M KOH and 1 M H₂SO₄ electrolytes, respectively. The N-doped GO is more activated in the acid electrolyte compared to thermally reduced graphite oxide (TrGO). Specific volumetric capacitance of N-doped GO in 1.8 M tetraethylmethylammonium tetrafluoroborate electrolyte is 57.4 F cc⁻¹ which is higher than 30.5 F cc⁻¹ of the TrGO, demonstrating positive effects of the nitrogen doping in the organic electrolytes for the energy storage devices.