N2���������ŵ���΢���������ŵ�ת���PIC/MCģ��

开发了氮空心阴极放电PIC/MC二维自洽模型。研究了N2传统空心阴极向微空心阴极放电转变过程中电势和电场的变化。结果表明,不同尺寸的空心阴极放电的电势及电场分布规律几乎类似,但空心阴极孔径减小且气压增加时,电场近似线性增加;典型微空心阴极电场比传统空心阴极放电电场约大3个量级;微空心阴极放电产生的电子,氮分子离子和氮原子离子的密度比传统空心阴极放电约大3个量级,且微空心阴极放电中,N2+密度比N+密度大8倍以上。     

分光光度法测定吸收液中二氧化氮的质量控制

探讨了分光光度法测定吸收液中二氧化氮,采用盲样与已知标准样品进行比对,结果表明,该法符合质量控制要求,并对可能影响质控结果的因素进行了讨论。     

Adsorption of N2 and N2O on Ni(7 5 5) surface: ab initio periodic density functional study

Adsorption of N₂ and N₂O at various sites on Ni(7 5 5) has been investigated by density functional theory (DFT) method (periodic DMol³). Several possible adsorption structures (attaching the nitrogen atom to the surface, or lying parallel) are found for both molecules. There is a clear binding energy preference of N₂ and N₂O for step sites in contrast to the case of CO. It is revealed that the decomposition of N₂O occurs exclusively near the step, but not on the terrace. Two decomposition channels can be considered; dissociative adsorption and spontaneous decomposition during TPD ramp. Three possible candidates for the precursor of the spontaneous decomposition of N₂O during TPD ramp are discussed.     

SiH3与NO2反应机理的理论研究

采用密度泛函B3LYP/6311G和高级电子相关耦合簇CCSD(T)/6311G方法计算研究了SiH3与NO2的反应机理,全参数优化了反应势能面上各驻点的几何构型,用内禀反应坐标(IRC)计算和频率分析方法,对过渡态进行了验证.研究结果表明,SiH3与NO2是一多通道多步骤的反应,经过缔合,氢转移和离解等复杂过程,最终得到5种产物.     

Synthesis and characterization of water-soluble carbon nanotubes from mustard soot

Carbon nanotubes (CNT) has been synthesized by pyrolysing mustard oil using an oil lamp. It was made water-soluble (wsCNT) through oxidative treatment by dilute nitric acid and was characterized by SEM, AFM, XRD, Raman and FTIR spectroscopy. The synthesized wsCNT showed the presence of several junctions and defects in it. The presence of curved graphene structure (sp²) with frequent sp³ hybridized carbon is found to be responsible for the observed defects. These defects along with the presence of di- and tri-podal junctions showed interesting magnetic properties of carbon radicals formed by spin frustration. This trapped carbon radical showed ESR signal in aqueous solution and was very stable even under drastic treatment by strong oxidizing or reducing agents. Oxidative acid treatment of CNT introduced several carboxylic acid group functionalities in wsCNT along with the nicking of the CNT at different lengths with varied molecular weight. To evaluate molecular weights of these wsCNTs, an innovative method like gel electrophoresis using high molecular weight DNA as marker was introduced.     

NO dissociation pathways on Rh(1 0 0), (1 1 0), and (1 1 1) surfaces: A comparative density functional theory study

The chemisorption and dissociation pathways of NO on the Rh(1 0 0), (1 1 0), and (1 1 1) surfaces are studied by the plane-wave density functional theory (DFT) with CASTEP program. In addition, the electronic and geometrical effects that affect the NO dissociation reactions have been investigated in detail. The calculation results are presented as following: The effective activation energies of the best NO dissociation pathways on the Rh(1 0 0), the Rh(1 1 0), and the Rh(1 1 1) are 0.63, 0.66 and 1.77 eV, respectively. The activity of the Rh planes for NO dissociation is in the order of Rh(1 0 0) ≈ Rh(1 1 0) > Rh(1 1 1). The low dissociation barrier for Rh(1 0 0) and Rh(1 1 0) is associated with the existence of a lying-down NO structure which acts as a precursor for dissociation. By Mulliken population analysis and structure analysis, both electronic and geometrical effects are found to affect the NO dissociation reactions, but the geometrical effect exceed the electronic. The energy decomposition scheme has been used to provide further insight into the NO dissociation reactions. Based on the calculations, the interaction energy between N and O in the transition state on the Rh(1 1 1) is found much larger than that on the Rh(1 0 0) and the Rh(1 1 0). The major differences of should originate from the variation of the bonding competition effect.     

Enhanced photocatalytic activity and stability of nano-scaled TiO2 co-doped with N and Fe

Titanium dioxide (TiO₂) nanoparticles co-doped with N and Fe were prepared via modified sol-gel process. The products were characterized by transmission electron microscopy (TEM), N₂ adsorption, X-ray diffraction (XRD), Raman spectroscopy, UV-vis spectroscopy, photoluminescence (PL), and X-ray photoelectron spectroscopy (XPS). It is shown that the prepared TiO₂ particles were less than 10 nm with narrow particle size distribution. The addition of MCM-41 caused the formation of Ti-O-Si bond which fixed the TiO₂ on MCM-41 surface, thus restricted the agglomeration and growth of TiO₂ particles. The photocatalytic performance in the degradation of methylene blue showed that N, Fe co-doped TiO₂ exhibited much higher photocatalytic activity than doped sample with nitrogen or Fe³⁺ alone under both UV and visible light. N, Fe co-doping decreased the loss of doping N during the degradation reaction, thus increased the photocatalytic stability. It was also found that the nitridation time had significant influence on the photocatalytic activity of prepared TiO₂ catalysts.     

Thermodynamics of nitrogen adsorption on the zeolite H-FER

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-FER results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted acid groups. This hydrogen bonding interaction leads to activation, in the IR, of the fundamental NN stretching mode, which appears at 2331 cm⁻¹. From the infrared spectra taken over a temperature range, while simultaneously recording integrated IR absorbance, temperature and nitrogen equilibrium pressure, the thermodynamics of the adsorption process was studied. The standard adsorption enthalpy and entropy resulted to be ΔH° = −20(±1) kJ mol⁻¹ and ΔS° = −131(±10) J mol⁻¹ K⁻¹, respectively.     

TCH-600氧、氮、氢分析仪在唐钢的应用

通过TCH-600氧、氮、氢分析仪在唐钢的实际应用,重点介绍了助熔剂、坩埚、样品熔解及空白和校正过程中应注意的问题,钢铁样品分析条件的选择.     

测定总氮时影响空白吸光值的因素

针对GB 11894-89测定污水中总氮空白值偏高的情况,分析了碱性过硫酸钾本身以及纯度的影响、消解量、消解温度和时间、去离子水纯度、玻璃器皿的洁净度、碱性过硫酸钾存储时间、环境因素等影响因素,找出了实验出现问题的原因,并进行了校正.