金属离子掺杂对TiO2光催化性能的影响

TiO₂光催化反应过程涉及光生电荷、电荷迁移、电荷在TiO₂表面的反应和溶液体相反应4个顺序相接并相互影响的步骤.在TiO₂中掺杂金属离子对以上4个步骤均有重要影响,合理的掺杂可有效地提高其光催化性能.本文综合了国内外此方面的最新研究成果,从提高TiO₂光催化性能和优化光催化反应的角度出发,在材料吸光能力、电荷扩散、表面反应、粒径和晶型等方面,全面地分析总结了金属离子掺杂的影响效果和规律性认识,并对TiO₂基光催化材料的金属离子掺杂改性研究的未来发展方向提出了建议.文中还简要介绍了相关的掺杂方法和材料表征手段.     

甲烷氧化细菌催化二氧化碳生物合成甲醇的研究

甲烷氧化细菌中包含的甲烷单加氧酶(MMO)、甲醇脱氢酶(ADH)、甲醛脱氢酶(FaldDH)、甲酸脱氢酶(FateDH)经过一系列反应能够把甲烷深度氧化生成二氧化碳，并生成一定的能量物质．把二氧化碳还原为甲醇是一个需要能量的过程，目前还没有已知的有机体在温和条件下完成这一反应．研究发现，甲基弯菌Methylosi-nus trichosporium IMV 3011可以催化二氧化碳生物转化生成甲醇．在休眠的悬浮细胞中充人二氧化碳后，反应一段时间在反应液中检测到了甲醇．二氧化碳转化成甲醇是一个需要能量推动的反应，为了补充反应所消耗的能量．反应一段时间后需要用甲烷进行再生，以恢复细胞中的还原当量NADH．我们进行了反应再生的交替连续批式反应，甲醇积累量能够维持在一个比较稳定的水平．理论上，反应不会增加温室效应，这是一个有效的、环境友好的、可恢复的反应过程．     

便携式微波等离子体离子化检测器气相色谱仪用于气体分析的研究

本文使用自制的便携式微波诱导等离子体离子化检测器气相色谱仪对可燃气体中N_2、O_2、H_2和CH_4的测定方法进行了研究。以氩气为载气和工作气体,考察了改进后的微波诱导等离子体离子化检洲器(MIPID)的工作参数对测定的影响。对煤气和乙炔中的O_2、N_2、H_2和CH_4进行了测定,分析结果与热导池检测器(TCD)的气相色谱法一致。讨论了高电离电位(>11.7ev)气体组分在MIPID中响应特性。     

Mixing of electronic states in molybdenum complexes involved in nitrogen activation

The mechanism for nitrogen activation by molybdenum complexes is a complicated one, involving as it does the coupling of a quartet molybdenum reactant with a singlet nitrogen molecule, passing via a series of quartet and doublet encounter complexes to a triplet intermediate, with the subsequent spin crossing to the singlet surface which then leads via a singlet transition state to the final pair of singlet products. We have investigated in detail a variety of levels of theory to describe the crossing of these electronic surfaces and have calculated both lower-bound and actual minimum energy crossing points for the key spin inversion processes.     

Synthesis and characterization of poly(amidoamine)-platinum(II) complexes. Detailed speciation by Matrix-Assisted Laser Desorption Ionization Mass Spectrometry

MALDI and ESI-MS have been applied to the characterization of the reaction products between the labile cis-[Pt(DMSO)₂Cl₂] (1) and trans-[Pt(DMSO)₂Cl(CH₃)] (2) complexes with the simplest poly(amidoamine) ligand (PAMAM, G = 0, 1,2-diaminoethane as core). The comparison of the mass spectra of the starting G₀ and those of the metallo-dendrimers formed upon mixing of the reagents in an equimolecular ratio, and the analysis of the isotopic distribution in the ESI spectra, have revealed the formation of cationic and neutral mononuclear complexes with PAMAM as ligand, e.g., cis-[Pt(DMSO)(PAMAM)Cl]Cl or trans-(C,N)[Pt(DMSO)(PAMAM)Cl(CH₃)], together with various minor components, which have been identified as derivatives from defective structures of PAMAM. The geometry of the main products has been deduced from the values of the protons coupling constants with the isotopically abundant ¹⁹⁵Pt. The metal-to-ligand bond is restricted to the peripheral amino groups of PAMAM which shows sufficient flexibility to involve either one or two branches in the coordination bonding.     

Optimization of a nitrogen analyser based on the Dumas method

The objectives of this work was to obtain a total nitrogen concentration in milk with the Dumas method for industrial and research applications. This method was faster than the Kjheldal method (5 min against 2 h or 3 h) but less precise. A three factor experimental design was performed to optimize the instrument, a FP-2000 supplied by LECO. The first interpretation of the experimental design was disappointing and no conclusion could be done. It was not a failure of experimental design but a lack of thinking on the physical and chemical aspect of the problem. Selection and construction of composite responses based on chemical and physical consideration were the keys to optimize the Dumas method. This method is now as precise as the Kjheldal method, but considerably faster.     

Preparation of Fluorine‐Doped Lead Dioxide Modified Electrodes for Electroanalytical Applications

The effect of F^? on the modified films of lead dioxide in morphology and structure was studied. The results obtained by cyclic voltammetry (CV), X‐diffractometer (XRD) and scanning electron microscope (SEM) techniques indicated that F^? could change the magnitude of lead dioxide crystal grain and the preferred crystallizing orientation on the substrate surface, even though it didn't change the basic structure of PbO₂. When the modified electrode was applied as an analytical sensor to determine phenolic compounds, the linearity was in the range of 2×10^?5 – 1×10^?3 mol/L and the detection limit was 2.5×10^?6 mol/L. It was all found that the stability and reproducibility of the oxide‐modified electrodes were improved by additional F^?.     

Sulfur hexafluoride as a mobile phase for supercritical fluid chromatography

Summary The capabilities of sulfur hexafluoride as a mobile phase for supercritical-fluid chromatography are investigated. An evaluation of its overall utility on the basis of separations of standard aromatic hydrocarbon odel mixtures performed on a variety of bonded-phase, packed columns with UV detection is presented. The dependence of separation performance upon operational parameters is also examined. A comparative evaluation of the chroamtographic properties of supercitrical sulfur hexafluoride and those of supercritical carbon dioxide is developed from these separations under corresponding supercritical state conditions.     

Cu/TiO2-NiO上光促表面催化CO2和H2O合成CH3OH反应规律

采用溶胶-凝胶法制备了n(电子型)-p(空穴型) 复合半导体材料0.5％Cu/TiO2-2.0％NiO (w),利用X射线衍射(XRD)、透射电镜(TEM)、红外光谱(IR)、紫外-可见光漫反射(UV-Vis)、程序升温脱附(TPD)技术对材料结构、吸光性能、化学吸附性能进行了表征,研究了该材料对CO2和H2O合成CH3OH的光促表面催化反应(PSSR)规律.结果表明,所制备材料能够明显促进目的反应,室温条件下即有CH3OH生成.在200 ℃下,由于光-表面-热的协同效应,CO2转化率得以提高,且CH3OH的选择性达到87.5％ .根据实验结果,得出CO2在材料表面的卧式吸附态为CH3OH的前驱物,并对PSSR机理进行了讨论.     

二氧化铈还原表面上水煤气变换反应机理

采用原位红外，程序升温脱附，脉冲表面反应技术研究了ＣｅＯ２还原表面在中温变换反应条件下表面物种的生成及脱附，并根据研究结果归纳出水煤气变换反应机理。