Myoglobin/arylhydroxylamine film modified electrode: Direct electrochemistry and electrochemical catalysis

The adsorption processes and electrochemical behavior of 4-nitroaniline (4-NA) adsorbed onto glassy carbon electrodes (GCE) have been investigated in aqueous 0.1 M nitric acid (HNO₃) electrolyte solutions using cyclic voltammetry (CV). 4-NA adsorbs onto GCE surfaces, and upon potential cycling past −0.2 V, is transformed into the arylhydroxylamine (ArHA) derivative which exhibits a well-behaved pH dependent redox couple centered at 0.32 V at pH 1.5. It is noted as arylhydroxylamine modified glassy carbon electrodes (HAGCE). This modified electrode can be readily used as an immobilization matrix to entrap proteins and enzymes. In our studies, myoglobin (Mb) was used as a model protein for investigation. A pair of well-defined reversible redox peaks of Mb (Fe(III)-Fe(II)) was obtained at the Mb/arylhydroxylamine modified glassy carbon electrode (Mb/HAGC) by direct electron transfer between the protein and the GCE. The formal potential (E^0′), the apparent coverage (Γ^*) and the electron-transfer rate constant (k_s) were calculated as −0.317 V, 8.26 × 10⁻¹² mol/cm² and 51 ± 5 s⁻¹, respectively. Dramatically enhanced biocatalytic activity was exemplified at the Mb/HAGC electrode by the reduction of hydrogen peroxide (H₂O₂), trichloroacetic acid (TCA) and oxygen (O₂). The Mb/arylhydroxylamine film was also characterized by UV-visible spectroscopy (UV-vis), scanning electron microscope (SEM) indicating excellent stability and good biocompatibility of the protein in the arylhydroxylamine modified electrode. This new Mb/HAGC electrode exhibited rapid electrochemical response (2 s) for H₂O₂ and had good stability in physiological condition, showing the potential applicability of the films in the preparation of third generation biosensors or bioreactors based on direct electrochemistry of the proteins.     

Thiophene‐S,S‐dioxidized Indophenine: A Quinoid‐Type Building Block with High Electron Affinity for Constructing n‐Type Polymer Semiconductors with Narrow Band Gaps

Three thiophene‐S,S‐dioxidized indophenine (IDTO) isomers, 3 a (E,E,E), 3 b (Z,E,E), and 3 c (Z,E,Z), were synthesized by oxidation of an indophenine compound. 3 b and 3 c could be converted into the most‐stable 3 a by heating at 110 °C. An IDTO‐containing conjugated polymer, PIDTOTT, was prepared using 3 a as a comonomer through a Stille coupling reaction, and it possesses a narrow band gap and low energy levels. In organic field effect transistors (OFETs), PIDTOTT exhibited unipolar n‐type semiconductor characteristics with unexpectedly high electron mobility (up to 0.14 cm² V^?1 s^?1), despite its rather disordered chain packing.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

Experimental and Theoretical Investigations of Structural Isomers of Dichalcogenoimidodiphosphinate Dimers: Dichalcogenides or Spirocyclic Contact Ion Pairs?

A synthetic protocol for the tert-butyl-substituted dichalcogenoimidodiphosphinates [Na(tmeda){(EPtBu(2))(2)N}] (3 a, E=S; 3 b, E=Se; 3 c, E=Te) has been developed. The one-electron oxidation of the sodium complexes [Na(tmeda){(EPR(2))(2)N}] with iodine produces a series of neutral dimers (EPR(2)NPR(2)E--)(2) (4 b, E=Se, R=iPr; 4 c, E=Te, R=iPr; 5 a, E=S, R=tBu; 5 b, E=Se, R=tBu; 5 c, E=Te, R=tBu). Attempts to prepare 4 a (E=S, R=iPr) in a similar manner produced a mixture including HN(SPiPr(2)). Compounds 4 b, 4 c and 5 a-c were characterised by multinuclear NMR spectra and by X-ray crystallography, which revealed two alternative structures for these dimeric molecules. The derivatives 4 b, 4 c, 5 a and 5 b exhibit acyclic structures with a central chalcogen-chalcogen linkage that is elongated by approximately 2 % (E=S), 6 % (E=Se) and 8 % (E=Te) compared to typical single-bond values. By contrast, 5 c adopts an unique spirocyclic contact ion-pair structure in which a [(TePtBu(2))(2)N](-) ion is Te,Te' chelated to an incipient [(TePtBu(2))(2)N](+) cyclic ion. DFT calculations of the relative energies of the two structural isomers indicate a trend towards increasing stability for the contact ion pair relative to the corresponding dichalcogenide on going from S to Se to Te for both the isopropyl and tert-butyl series. The two-electron oxidation of [Na(tmeda){(EPtBu(2))(2)N}] (E=S, Se, Te) with iodine produced the salts [(EPtBu(2))(2)N](+)X(-) (7 a, E=S, X=I(3); 7 b, E=Se, X=I; 7 c, E=Te, X=I), which were characterised by X-ray crystallography. Compound 7 a exists as a monomeric, ion-separated complex with [d(S--S)=2.084(2) A]; 7 b and 7 c are dimeric [d(Se--Se)=2.502(1) A; d(Te--Te)=2.884(1) A].     

Structures and vibrational spectra of the sulfur-rich oxides SnO (n = 4-9): the importance of pi*-pi* interactions

The structures of a large number of isomers of the sulfur oxides S(n)O with n = 4-9 have been calculated at the G3X(MP2) level of theory. In most cases, homocyclic molecules with exocyclic oxygen atoms in an axial position are the global minimum structures. Perfect agreement is obtained with experimentally determined structures of S(7)O and S(8)O. The most stable S(4)O isomer as well as some less stable isomers of S(5)O and S(6)O are characterized by a strong pi*-pi* interaction between S==O and S==S groups, which results in relatively long S--S bonds with internuclear distances of 244-262 pm. Heterocyclic isomers are less stable than the global minimum structures, and this energy difference approximately increases with the ring size: 17 (S(4)O), 40 (S(5)O), 32 (S(6)O), 28 (S(7)O), 45 (S(8)O), and 54 kJ mol(-1) (S(9)O). Owing to a favorable pi*-pi* interaction, preference for an axial (or endo) conformation is calculated for the global energy minima of S(7)O, S(8)O, and S(9)O. Vapor-phase decomposition of S(n)O molecules to SO(2) and S(8) is strongly exothermic, whereas the formation of S(2)O and S(8) is exothermic if n<7, but slightly endothermic for S(7)O, S(8)O, and S(9)O. The calculated vibrational spectra of the most stable isomers of S(6)O, S(7)O, and S(8)O are in excellent agreement with the observed data.     

胶束电动色谱法和微柱液相色谱法分析白藜芦醇的比较

白藜芦醇可以顺式和反式两种形式存在。它是一种具有药理活性的植物抗毒素,具有抗肿瘤、保护心血管、防止机体老化的功效。分别采用胶束电动色谱和微柱液相色谱两种方法对白藜芦醇的两种异构体进行了分离,并对这两种方法进行了比较。结果表明,两种方法均具有分离快速、重现性好、溶剂消耗少的特点,都适用于白藜芦醇的分析。     

Photo-responsive azo MOF exhibiting high selectivity for CO2 and xylene isomers

A combination of azo and acylamide ligands is used in the preparation of metal–organic frameworks. Light response research reveals that under UV–vis irradiation, the CO₂ adsorption of 1 declines as much as 21.4%. 1 exhibits excellent CO₂ adsorption selectivity over CH₄, O₂, CO, and N₂ gasses with IAST selectivity of 21–580 at 293 K. This MOF also has promising potential in separation of xylene isomers in the liquid phase with the adsorption of p-xylene of 265.15, o-xylene of 101.25 and m-xylene of 0 mg g^?1, respectively.     

Total Synthesis of Lajollamycin B

The first total synthesis of lajollamycin B, a structurally novel nitro-tetraene spiro-β-lactone/γ-lactone antibiotic, is described. The convergent synthesis involves the construction of the C8′–C11′ nitrodienylstannane and its coupling with the segment prepared from the C1′–C7′ ω-iodoheptadienoic acid and the right-hand heterocyclic fragment, which has been utilized for our previous syntheses of oxazolomycin A. The revision of the geometry of the terminal Δ^{10′, 11′}-double bond from E to Z is also described for the structure of natural lajollamycin B.     

Synthesis and properties of aromatic polyimides derived from 2,2,′3,3′‐biphenyltetracarboxylic dianhydride

2,2,′3,3′‐Biphenyltetracarboxylic dianhydride (2,2,′3,3′‐BPDA) was prepared by a coupling reaction of dimethyl 3‐iodophthalate. The X‐ray single‐crystal structure determination showed that this dianhydride had a bent and noncopolanar structure, presenting a striking contrast to its isomer, 3,3,′4,4′‐BPDA. This dianhydride was reacted with aromatic diamines in a polar aprotic solvent such as N,N‐dimethylacetamide (DMAc) to form polyamic acid intermediates, which imidized chemically to polyimides with inherent viscosities of 0.34–0.55 dL/g, depending on the diamine used. The polyimides from 2,2,′3,3′‐BPDA exhibited a good solubility and were dissolved in polar aprotic solvents and polychlorocarbons. These polyimides have high glass transition temperatures above 283°C. Thermogravimetric analyses indicated that these polyimides were fairly stable up to 500°C, and the 5% weight loss temperatures were recorded in the range of 534–583°C in nitrogen atmosphere and 537–561°C in air atmosphere. All polyimides were amorphous according to X‐ray determination. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1425–1433, 1999     

Host-guest complexes of cucubit[8]uril with phenanthrolines and some methyl derivatives

Cucurbituril a molecular container (or host) has a rigid hollow interior cavity which is large enough to accommodate, one or more, smaller molecules (or guests). The cavity is accessible through two carbonyl portal openings. Molecules or guests enter the …