The influence of methacryloxypropyltrimethoxysilane on the sol-gel process of TEOS

The influence of MPS on the hydrolysis and condensation process of TEOS is studied by means of hydrolysis time (t _H) and gelation time (t _G) curves. The addition of MPS to a mixture of TEOS, ethanol and water results in a substantial increase in t _G. The increase is most pronounced when adding takes place in the acid step of the sol-gel process of TEOS.In acid environment hydrolysis of MPS will be dominant compared to hydrolysis of TEOS. This results in an effective decrease of the amount of water available for the hydrolysis of TEOS. However, this decrease in water concentration cannot explain the complete effect of the addition of MPS. The hydrolysed MPS will also be incorporated in the gel network and will strongly influence the cross-linking ability. The lesser functionality of MPS compared to TEOS and the steric hindrance of the acrylate group results in a large increase in t _G.     

Binding site optimisation for artificial enzymes by diffusion NMR of small molecules

A binding site optimisation protocol for the design of artificial enzymes based on "small molecule-small molecule" binding studies by diffusion NMR is presented. Since the reaction chosen was the hydrolysis of ester 1 ([4-(4-carboxy-1-oxobutyl)-aminobenzyl]-phenethyl ester), an analogous phosphonate ester 2 ([4-(4-carboxy-1-oxobutyl)-aminobenzyl]-phosphonic phenethyl ester) was selected as a suitable transition state analogue (TSA). The key objective of the NMR studies was to find a unit with functional groups capable of binding to the acidic sites of the TSA. Nine dipeptides, mainly with basic and hydroxyl groups, were used and their affinity to the TSA was studied by measuring the change in the diffusion coefficient, D(pep), upon binding by pulse field gradient NMR. The value of D(pep) at 298 K in D(2)O at pD 5, 7 and 10 was measured both in free solution, and mixtures containing one dipeptide and the TSA. As both components are low molecular weight species with M < 500, a TSA-to-dipeptide ratio of 10:1 was used to detect significant changes in D(pep). The results revealed that dipeptides with basic residues show higher affinity to the TSA than those with hydroxyl or aliphatic side chains in aqueous solutions. The dipeptide showing the most significant relative change in D(pep) was H-Arg-Arg-OH, and the binding constant was estimated to be 86 L M(-1) by measuring D(pep) at varying concentrations of the TSA. In addition, binding of the TSA to a new water-soluble polymer with a polyallylamine backbone and randomly distributed Arg-Arg binding sites was examined, and the binding constant was estimated to be > or =1500 L M(-1). As confirmed by further catalytic activity tests, polymers containing Arg-Arg as a binding site are capable of significant rate accelerations in the hydrolysis of ester 1.     

Synthesis and properties of new polyesters having tetrahydrofuran rings in their main chains

New polyesters 6a–6c consisting of 2,4-linked tetrahydrofuran rings were synthesized by bulk polycondensation of methyl trans- and cis-4-hydroxytetrahydrofuran-2-carboxylates ( 5a and 5b ) and a stereoisomeric mixture of methyl 4-hydroxy-5-methyltetrahydrofuran-2-carboxylate ( 5c ) at high temperature. These monomers were prepared from methyl glycolate or methyl lactate and diethyl maleate through a four-step reaction sequence. The polycondensation was carried out without solvent at different temperatures ranging from 150 to 220°C. Titanium isopropoxide was most effective among the catalysts examined, giving polyesters with number-average molecular weights up to 2 × 10⁴. Polyester 6a consisting of trans-2,4-linked tetrahydrofuran rings was soluble in trifluoroacetic acid and a mixed solvent of chloroform and methanol (10/1, v/v). Polyester 6b composed of cis-2,4-linked tetrahydrofuran rings was soluble in dimethyl sulfoxide and dimethylformamide in addition to the two solvents for 6a . Polyester 6c with 5-methyl-substituted tetrahydrofuran rings was composed of a mixture of stereoisomeric units and thus was soluble in a variety of solvents including chloroform, tetrahydrofuran, acetonitrile, dimethyl sulfoxide, and dimethylformamide. The glass transition temperatures of 6a, 6b , and 6c determined by DSC were 109, 88, and 66°C. These polyesters were found to be very slowly hydrolyzed in a neutral phosphate buffer solution at ambient temperature. © 1993 John Wiley & Sons, Inc.     

The determination of phenol in urine by enzymatic hydrolysis/headspace gas chromatography

Summary A new method has been developed for the determination of phenol in urine in which the phenol conjugates are hydrolysed enzymatically and the liberated phenol is analysed by headspace chromatography. The results compare favourably with those obtained by the method of van Haaften and Sie in which acid hydrolysis is carried out in a heated GC precolumn. The enzymatic hydrolysis headspace technique appears to be very reliable and does not suffer from the disadvantages of precolumn acid hydrolysis.Since this paper was submitted, we have found a report on the enzymatic hydrolysis of phenyl glucuronide in urine followed by gas chromatographic analysis which seems to have been overlooked by later workers. The paper is by H. Desoille, T. F. Gandenzi-Britto and M. Philbert in Archives des Maladies Professionelles, de Medecine du Travail et de Securite Sociale (Paris),30 (3), 129 (1969).     

Cyclodextrin effects on physical–chemical properties of novocaine

The UV-vis absorption and the fluorescence emission spectra of novocaine were analysed in aqueous cyclodextrin (CD) solutions. Either the absorbance read at λ_max 290 nm or the fluorescence emission intensity at λ_ems 346 nm increase in the presence of both α- and β-CD due to the formation of 1:1 inclusion complexes. The lower polarity of the CD-cavity sensed by the included drug enhances the emitted fluorescence; in fact, the same effect was observed in aqueous mixtures of acetonitrile, dioxane, or dimethylsulfoxide. The inclusion complex formation between the monocation of novocaine and CDs diminishes the electrical conductance of aqueous solutions of novocaine hydrochloride (NoHCl). Both the nitrosation reaction in aqueous acid medium and the ester hydrolysis in alkaline medium are retarded in the presence of CDs. The strongest effect was observed with β-CD as a consequence of the higher stability inclusion complex.     

Isotherms for adsorption of cellobiohydrolase I and II fromtrichoderma reesei on microcrystalline cellulose

Adsorption to microcrystalline cellulose (Avicel) of pure cellobiohydrolase I and II (CBH I and CBH II) fromTrichoderma reesei has been studied. Adsorption isotherms of the enzymes were measured at 4‡C using CBH I and CBH II alone and in reconstituted equimolar mixtures. Several models (Langmuir, Freundlich, Temkin, Jovanovic) were tested to describe the experimental adsorption isotherms. The isotherms did not follow the basic (one site) Langmuir equation that has often been used to describe adsorption isotherms of cellulases; correlation coefficients (R²) were only 0.926 and 0.947, for CBH I and II, respectively. The experimental isotherms were best described by a model of Langmuir type with two adsorption sites and by a combined Langmuir-Freundlich model (analogous to the Hill equation); using these models the correlation coefficients were in most cases higher than 0.995. Apparent binding parameters derived from the two sites Langmuir model indicated stronger binding of CBH II compared to CBH I; the distribution coefficients were 20.7 and 3.7 L/g for the two enzymes, respectively. The binding capacity, on the other hand, was higher for CBH I, 1.0 Μmol (67 mg) per gram Avicel, compared to 0.57 Μmol/g (30 mg/g) for CBH II. The isotherms when analyzed with the combined Langmuir-Freundlich model indicated presence of unequal binding sites on cellulose and/or negative cooperativity in the binding of the enzyme molecules.     

高效液相色谱法检测保健食品中大豆异黄酮含量

建立了保健食品中大豆异黄酮的高效液相色谱检测方法 ,通过正交试验法得出保健食品中大豆异黄酮的最佳水解条件为 :盐酸浓度2.0mol/L,酸体积40mL ,水解温度80℃ ,水解时间3h;采用HypersilODS2C18 色谱柱 (250mm×4.6mmID ,5μm) ,流动相为甲醇 -水(体积比47∶53) ,流速1.0mL/min ,检测波长260nm ,柱温40℃ ,线性范围在0.5～96mg/L ,相关系数r为0.999 ,相对标准偏差 (RSD)2.09% ,回收率在98.5 %～100.5 %。     

Sol-Gel Processing of Transparent PLZT((Pb,La)(Zr,Ti)O3) Fibers

PLZT((Pb,La)(Zr,Ti)O₃) ceramic fibers were prepared by the sol-gel method from a solution of lead acetate trihydrate, lanthanum isopropoxide, zirconium n-propoxide and titanium isopropoxide containing 2-methoxyethanol as the solvent. The as-drawn gel fibers were pretreated in an autoclave and preheated in flowing H₂O vapor prior to the heat-treatment for crystallization. The effects of autoclaving and preheating in flowing H₂O vapor on the structure and composition of the resultant fibers were investigated. Optically transparent single phase perovskite PLZT fibers of 5–15 m in thickness and 5 cm in length were successfully prepared when the autoclave-treatment and the preheating in flowing H₂O vapor were conducted prior to crystallization. These treatments are thought to promote hydrolysis of the organic groups and polycondensation reaction in the gel fibers, leading to the successful formation of dense, crack-free transparent PLZT fibers.     

A mild hydrolysis of esters mediated by lithium salts

When treated with amine bases such as triethylamine and various lithium salts in wet solvents, esters are efficiently hydrolyzed to the corresponding acids in good yields. Esters incorporating an α- or β-heteroatom with respect to the ester carbonyl group are hydrolyzed rapidly even at room temperature. To further demonstrate the usefulness of this method, one example is provided where hydrolysis of acetylated camphorsultam is mediated by LiBr.