ELECTRON TRANSPORT BEHAVIOURS IN THE NITROGEN DIRECT CURRENT GLOW DISCHARGE

A Monte Carlo simulation is presented to describe the electron transport behaviours in the nitrogen direct current glow discharge. The energy and angular distributions of the electrons at different positions of the cathode dark space are calculated; their energy and density distribution features throughout the entire discharge are discussed. The influence of molecular vibrational excitation, typical for electron－molecule collisions, has been studied and the elementary process of active species generation has been illustrated. The simulated results reveal that, in the cathode dark space, the high-energy electrons are mainly forward scattering and behave as a high-energy ‘electron beam'. The sharp increase of the number of secondary electrons plays an important role in producing active species at the interface between the cathode dark space and the negative glow region. The vibrational excitation enhances the energy loss of electrons in the negative glow region.     

Reliability analysis of stochastic structural system considering static strength, stiffness and fatigue

Multi-failures are possible to appear in the process of using the structural system, such as dead load failure, fatigue failure and stiffness failure. The expression of residual resistance is given based on the impact of random crack propagation in- duced by the fatigue load on the critical limit stress and section modulus in this paper. The failure modes of every element of the structural system are analyzed under dead and fatigue loads, and the influence of the correlation of failure modes on reliability of the element is considered. Failure mechanism and the correlation of failure modes under dead and fatigue loads are discussed, and the method of reli- ability analysis considering static strength, fatigue and stiffness is given. A nu- merical example is analyzed, which indicates that the failure probability is different for different use life and the influence of dead and fatigue loads on reliability of the structural system is different as well. This method of reliability analysis, in the pa- per, is better than the method only considering a single factor (or static strength, or fatigue, or stiffness, etc.) in the case of practical engineering.     

Formation of PAHs and soot platelets: multiconfiguration theoretical study of the key step in the ring closure–radical breeding polyyne‐based mechanism

Polyynes of general formula H? (C?C? )_nH are known to play a significant role in combustion and pyrolysis, possibly being intermediates in the formation of polycyclic aromatic hydrocarbons (PAHs) and soot. They have also been detected in astrophysical investigations. The key step in the polyyne‐based radical breeding mechanism for PAH growth is a cyclization, put forward by Krestinin, which implies disruption of electron couples, plausibly expected to be energy demanding. We explore the electronic features and energy requirements of such a process by quantum mechanical multiconfiguration methods (CASSCF and CASPT2). The features of the wavefunction are analyzed, and the free energy barriers are estimated over a wide range of temperatures, for three molecular models. The initial radical adduct A, generated by H ^. , HC?C ^. (ethynyl), or HC?C? C ^. H₂ ( propargyl ) addition to butadiyne (BD, HC?C? C?CH), undergoes a cyclization with the generation of two new radical centers. However, in most of the cases, one of these new singly occupied sp² orbitals has some overlap with the unpaired electron lobe already existent in A: some sort of bonding builds up and consequently the triradical character cannot be large. Only one model suggests a possible role of the radical breeding mechanism during combustion. Copyright © 2009 John Wiley & Sons, Ltd.     

Experimental and theoretical evidence for the chemical mechanism in SERRS of rhodamine 6G adsorbed on colloidal silver excited at 1064 nm

The evidence for the existence of a chemical mechanism in surface‐enhanced resonance Raman scattering (SERRS) of rhodamine 6G (R6G) adsorbed on colloidal silver excited at 1064 nm is reported on the basis of experimental and theoretical analyses. A weak absorption peak at around 1060 nm for R6G‐functionalized silver nanoparticles was observed, which is not present in the individual spectra of R6G or silver nanoparticles. Theoretically, the charge difference density reveals that this weak absorption is a metal‐to‐molecule charge transfer excited state. Copyright © 2010 John Wiley & Sons, Ltd.     

农药丁吡吗啉与腐殖酸作用机理探讨

探讨农药丁吡吗啉与腐殖酸的作用机理, 可进一步了解农药在土壤中腐殖酸催化下降解的行为过程。将市售腐殖酸进行逐级分离,获得黄腐酸、棕腐酸和黑腐酸的固态或溶液状态,而后分别与农药丁吡吗啉进行作用,利用红外,荧光两种分析方法对其作用机理进行了解释。结果表明,三组分与丁吡吗啉之间广泛存在范德华力、次级键等弱作用力。黄腐酸与丁吡吗啉之间存在氢键和电荷转移吸附等作用力,棕腐酸与丁吡吗啉存在电荷转移吸附等作用力,黑腐酸与丁吡吗啉之间的作用力最弱,即依照黄腐酸、棕腐酸、黑腐酸三组分平均分子量依次递增的顺序,与农药丁吡吗啉之间的作用力依次降低。     

Effects of duty ratio at low frequency on growth mechanism of micro-plasma oxidation ceramic coatings on Ti alloy

The aim of this work is to study the effects of duty ratio on the growth mechanism of the ceramic coatings on Ti-6Al-4V alloy prepared by pulsed single-polar MPO at 50 Hz in NaAlO₂ solution. The phase composition of the coatings was studied by X-ray diffraction, and the morphology and the element distribution in the coating were examined through scanning electron microscopy and energy dispersive spectroscopy. The thickness of the coatings was measured by eddy current coating thickness gauge. The corrosion resistance of the coated samples was examined by linear sweep voltammetry technique in 3.5% NaCl solution. The changes of the duty ratio (D) of the anode process led to the changes of the mode of the spark discharge during the pulsed single-polar MPO process, which further influenced the structure and the morphology of the ceramic coatings. The coatings prepared at D = 10% were composed of a large amount of Al₂TiO₅ and a little γ-Al₂O₃ while the coatings prepared at D = 45% were mainly composed of α-Al₂O₃ and γ-Al₂O₃. The coating thickness and the roughness were both increased with the increasing D due to the formation of Al₂O₃. The formation of Al₂TiO₅ resulted from the spark discharge due to the breakdown of the oxide film, while the formation of Al₂O₃ resulted from the spark discharge due to the breakdown of the vapor envelope. The ceramic coatings improved the corrosion resistance of Ti-6Al-4V alloy. And the surface morphology and the coating thickness determined the corrosion resistance of the coated samples prepared at D = 45% was better than that of the coated samples prepared at D = 10%.     

High-pressure laminar flame speeds and kinetic modeling of carbon monoxide/hydrogen combustion

Laminar flame speeds were accurately measured for CO/H₂/air and CO/H₂/O₂/helium mixtures at different equivalence ratios and mixing ratios by the constant-pressure spherical flame technique for pressures up to 40 atmospheres. A kinetic mechanism based on recently published reaction rate constants is presented to model these measured laminar flame speeds as well as a limited set of other experimental data. The reaction rate constant of CO + HO₂ → CO₂ + OH was determined to be k = 1.15 × 10⁵T^2.278 exp(−17.55 kcal/RT) cm³ mol⁻¹ s⁻¹ at 300-2500 K by ab initio calculations. The kinetic model accurately predicts our measured flame speeds and the non-premixed counterflow ignition temperatures determined in our previous study, as well as homogeneous system data from literature, such as concentration profiles from flow reactor and ignition delay time from shock tube experiments.     

On feedback and stable price adjustment mechanisms

Given an excess demand function of an economy, say Z(p)$Z(p)$, a stable price adjustment mechanism (SPAM) guarantees convergence of solution path p(t,_p0)$p(t,p_0)$ to an equilibrium _peq$p_{\mathit{eq}}$ solution of Z(p)=0$Z(p)=0$. Besides, all equilibrium points of Z(p)$Z(p)$ are asymptotically stable. Some SPAMs have been proposed, including Newton and transpose Jacobian methods. Despite this powerful stability property of SPAMs, their acceptation in the economics community has been limited by a lack of interpretation. This paper focuses on this issue. Specifically, feedback control theory is used to link SPAMs and price dynamics models with control inputs, which match the economically intuitive Walrasian Hypothesis (i.e., prices change with excess demand sign). Under mild conditions, it is shown the existence of a feedback function that transforms the price dynamics into a desired SPAM. Hence, a SPAM is interpreted as a fundamental (e.g., Walrasian) price dynamics under the action of a feedback function aimed to stabilize the equilibrium set of the excess demand function.     

Kinetic study of electrochemically induced Michael reactions of o‐benzoquinones with 2‐acetylcyclohexanone and 2‐acetylcyclopentanone

The reaction of electrochemically generated o‐benzoquinones ( 2a‐f ) as Michael acceptors with 2‐acetylcyclohexanone (ACH) and 2‐acetylcyclopentanone (ACP), as nucleophiles has been studied in various pHs using cyclic voltammetry. The results indicate that the participation of o‐benzoquinones ( 2a‐f ) in the Michael reaction with acetylcyclohexanone (ACH) to form the corresponding catechol derivatives ( 4a‐f ). Based on an EC mechanism, the homogeneous rate constants were estimated by comparing the experimental cyclic voltammetric responses with the digital simulated results. Copyright © 2007 John Wiley & Sons, Ltd.     

强碱胁迫枯草芽孢杆菌芽孢致死的拉曼光谱研究

应用单细胞拉曼分析技术结合PCA方法,以枯草芽孢杆菌芽孢为对象,以强碱为诱导剂实时记录芽孢生理变化过程,探究芽孢在强碱胁迫下的致死机制。实验表明,枯草芽孢杆菌芽孢和其萌发后芽孢在一定范围均有一定的耐受强碱能力,但萌发后芽孢的耐受力明显下降,主要原因是释放了维持其抗性及稳定性的特有Ca2+-DPA的保护;芽胞受强碱胁迫也会有少量Ca2+-DPA释放过程的行为特征,但通过分析所记录的光谱数据结果表明,其释放行为不同于由L-丙氨酸引起的芽孢的正常Ca2+-DPA释放过程。通过PCA比较分析强碱胁迫芽孢和萌发后芽孢Ca2+-DPA释放过程,主要是强碱破坏芽孢膜结构,膜损伤后强碱比较容易进到芽孢内部从而破坏蛋白质的主链结构链及核酸;芽孢膜通道也可能受到强碱的伤害,造成微量Ca2+-DPA的释放。