Instantaneous work hardening behaviour of two-phase tungsten heavy alloys: a phenomenological approach

ABSTRACT

The present work describes a phenomenological approach to explain the instantaneous behaviour of tungsten heavy alloys (WHAs) in heat-treated and swaged conditions. The strengths and elongation values of heat-treated materials are lower and higher than those of the swaged samples respectively. The heat-treated materials exhibit two slopes in true stress–true plastic strain curves and follow the Ludwigson constitutive equation. On the other hand, swaged materials display a single slope and adhere to typical Swift constitutive equation. The latter reflect the presence of pre-strain in the materials due to swaging deformation. The fracture surfaces in heat-treated materials consist of W-W decohesion along with matrix rupture and W-cleavage, while swaged samples consist of mainly W-cleavage. Both the materials display three typical stages (I, II and III) of work hardening. The second derivatives of true stress–true plastic strain curves of these alloys exhibit a perfect parabola although the nature of true stress–true strain as well as true stress–true plastic strain curves is quite different in heat-treated and swaged materials. This has been observed for the first time in WHAs consisting of matrix and W-grains. The shape of the parabola is simple and easy to fit. The fitting parameters of parabolas have been successfully employed to explain the flow behaviour of a large number of tungsten heavy alloys having two-phase microstructure in different processing conditions.     

Molecular dynamic study of temperature dependence of mechanical properties and plastic inception of CoCrCuFeNi high-entropy alloy

Molecular dynamics simulations are performed to study mechanical characteristics and homogeneous plastic inception of CoCrCuFeNi high-entropy alloy at various temperatures under uniaxial tension. It is found that the elastic modulus and ultimate tensile strength increase with temperature decreasing. A notable softening effect is observed at the elastic deformation stage caused by the decrease of the interatomic force gradient. Extrinsic stacking faults and deformation twins are extensively observed, which are formed via intrinsic stacking faults overlap.     

Sonication-Assisted Synthesis of Bimetallic Hg/Pd Alloy Nanoparticles for Catalytic Reduction of Nitrophenol and its Derivatives

In this article, we report a facile approach for the synthesis of an inexpensive catalyst of bimetallic Hg/Pd alloys comprising nanoparticles with various structures using a unique ultrasonic reaction that is conducted without the use of any reducing agent. The nanoparticles of Hg/Pd alloys (HgPd and Hg₂Pd₅) were achieved for the first time by sonicating an aqueous solution of Palladium (II) nitrate with metallic liquid mercury, as evidenced by XRD. EDS further confirmed the presence of Pd and Hg elements in the alloy. The surface morphology and structure of the nanoparticles have been systematically investigated by HRSEM, HRTEM and SAED pattern. In order to explore the catalytic activity of the as-synthesized nanoalloys, the catalytic reduction of 4-nitrophenol and a few other nitrophenol derivatives were investigated. Excellent catalytic activity was obtained for Hg/Pd (1:1) alloy, and the rate constant for the reduction of 4-NP with Hg/Pd at room temperature was found to be 58.4 × 10⁻³ s⁻¹, which is possibly the highest ever reported. The catalyst exhibited superior stability and reusability when compared with those reported in the literature for other catalysts based on noble metals.     

Energy of formation for and liquid binary alloys

We have investigated the free energy of formation for Ag_xIn_1-x and Ag_xSn_1-x liquid binary alloys at temperatures 1173 and 1250 K, respectively. A microscopic theory based on the first order perturbation has been applied. The interionic interaction and a reference liquid are the fundamental components of the theory. The interionic interaction is described by a local pseudopotential. A liquid of hard spheres (HS) of two different effective diametres and charges is used to describe the reference system. The results of the calculations for energy of formation agree very well with the available experimental data. Our calculations also reveal that a simple perturbative approach along with appropriate effective pair potentials can produce nearly quantitative results for the concerned alloys.     

Dissimilar autogenous full penetration welding of superalloy K418 and 42CrMo steel by a high power CW Nd:YAG laser

Experiments of autogenous laser full penetration welding between dissimilar cast Ni-based superalloy K418 and alloy steel 42CrMo flat plates with 3.5 mm thickness were conducted using a 3 kW continuous wave (CW) Nd:YAG laser. The influences of laser welding velocity, flow rate of side-blow shielding gas, defocusing distance were investigated. Microstructure of the welded seam was characterized by optical microscopy (OM), scanning electron microscopy (SEM) and X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). Mechanical properties of the welded seam were evaluated by microhardness and tensile strength testing. Results show that high quality full penetration laser-welded joint can be obtained by optimizing the welding velocity, flow rate of shielding gas and defocusing distance. The laser-welded seam have non-equilibrium solidified microstructures consisting of γ-FeCr_0.29Ni_0.16C_0.06 austenite solid solution dendrites as the dominant and very small amount of super-fine dispersed Ni₃Al γ′ phase and Laves particles as well as MC needle-like carbides distributed in the interdendritic regions. Although the microhardness of the laser-welded seam was lower than that of the base metal, the strength of the joint was equal to that of the base metal and the fracture mechanism showed fine ductility.     

Study of solid-state reactions in Sm(Co,Fe, Cu,Zr)z 2:17-type alloys by means of in situ electrical resistivity measurements

In the present work, solid-state reactions in Sm₂(Co, Fe, Cu, Zr)₁₇-type alloys have been investigated by means of in situ electrical resistivity measurements. Changes in the electrical resistivity of a Sm(Co_0.74Fe_0.1Cu_0.12Zr_0.04)_8.5 alloy after solid solution treatment at 1190 °C, quenching to room temperature, and during isothermal ageing at temperatures between 400 and 900 °C, have indicated microstructural/phase changes occurring at temperatures below those commonly used for the development of high coercivity in Sm(Co, Fe, Cu, Zr)_z-type materials. Subsequent crystallographic and magnetic transition measurements have shown a high degree of correlation with respect to the changes observed in the electrical resistivity during isothermal ageing.     

Possible coexistence of superconductivity and magnetism in intermetallic NiBi3

NiBi₃ polycrystals were synthesized via a solid state method. X-ray diffraction analysis shows that the main phase present in the sample corresponds to NiBi₃ in a weight fraction of 96.82 % according to the refinement of the crystalline structure. SEM - EDS and XPS analysis reveal a homogeneous composition of NiBi₃, without Ni traces. The powder superconducting samples were studied by performing magnetic measurements. The superconducting transition temperature and critical magnetic fields were determined as , Oe and Oe. The superconducting parameters were , , and κ=5.136. Isothermal measurements below the transition temperature show an anomalous behavior. Above the superconducting transition the compound presents ferromagnetic characteristics up to 750 K, well above the Ni Curie temperature.     

A study on wear resistance and microcrack of the Ti3Al/TiAl + TiC ceramic layer deposited by laser cladding on Ti-6Al-4V alloy

Laser cladding of the Al + TiC alloy powder on Ti-6Al-4V alloy can form the Ti₃Al/TiAl + TiC ceramic layer. In this study, TiC particle-dispersed Ti₃Al/TiAl matrix ceramic layer on the Ti-6Al-4V alloy by laser cladding has been researched by means of X-ray diffraction, scanning electron microscope, electron probe micro-analyzer, energy dispersive spectrometer. The main difference from the earlier reports is that Ti₃Al/TiAl has been chosen as the matrix of the composite coating. The wear resistance of the Al + 30 wt.% TiC and the Al + 40 wt.% TiC cladding layer was approximately 2 times greater than that of the Ti-6Al-4V substrate due to the reinforcement of the Ti₃Al/TiAl + TiC hard phases. However, when the TiC mass percent was above 40 wt.%, the thermal stress value was greater than the materials yield strength limit in the ceramic layer, the microcrack was present and its wear resistance decreased.     

Co50Fe25-xMnxSi25系列合金的结构、磁性和半金属性研究

利用实验和能带计算相结合的方法,对介于两种预期的半金属Heusler合金Co₂FeSi和Co₂MnSi间的四元合金Co₅₀Fe_25-xMn_xSi₂₅的晶体结构、磁性、能带结构和半金属性进行了研究.采用考虑库仑相互作用的的广义梯度近似方法计算了系列合金的能带结构,通过与实验结果进行对比,揭示了成分变化过程中合金分子磁矩及原子磁矩的变化规律.研究发现, 关键词： 磁性 半金属 Heusler合金     

Image analysis of atmospheric corrosion of field exposure high strength aluminium alloys

The corrosion morphology image acquisition system which can be used in the field was established. In Beijing atmospheric corrosion exposure station, the image acquisition system was used to capture the early stage corrosion morphology of five types of high strength aluminium alloy specimens. After the denoise treatment, wavelet-based image analysis method was applied to decompose the improved images and energies of sub-images were extracted as character information. Based on the variation of image energy values, the corrosion degree of aluminium alloy specimens was qualitatively and quantitatively analyzed. The conclusion was basically identical with the result based on the corrosion weight loss. This method is supposed to be effective to analysis and quantify the corrosion damage from image of field exposure aluminium alloy specimens.