改进型磁绝缘线振荡器的设计和数值模拟

 综合两种现有磁绝缘线振荡器的优点，对器件进行改进，将双渐变结构、轭流片和阻抗渐变三种增大功率的机制综合考虑，利用二维半全电磁PIC程序进行数值模拟，设计了一种新的改进型磁绝缘线振荡器，当外加电压为550kV，电流为35kA左右时，在L波段获得了6GW的峰值输出功率。     

Densification and lithium ion conductivity of garnet-type Li7-xLa3Zr2-xTaxO12 （x=0.25） solid electrolytes

The garnet-type Li7La3Zr2O12 ceramic is a promising solid electrolyte for all-solid-state secondary lithium batteries. However, it faces the problem of lithium volatilization during sintering, which may cause low density and deterioration of ionic conductivity. In this work, the effects of sintering temperature and addition on the density as well as the lithium ion conductivity of Li7-xLa3Zr2-xTaxO12 (LLZTO, x=0.25) ceramics prepared by solid state reaction have been studied. It is found that optimization of the sintering temperature leads to a minor increase in the ceramic density, yielding an optimum ionic conductivity of 2.9×10-4 S·cm-1 at 25℃. Introduction of Li 3 PO 4 addition in an appropriate concentration can obviously increase the density, leading to an optimum ionic conductivity of 7.2×10-4 S·cm-1 at 25℃. This value is superior to the conductivity data in most recent reports on the LLZTO ceramics.     

平均折射率为零的光子晶体中缺陷模频率特性的实验研究

利用传输线技术制备了左手材料,将左手材料与正常材料交替排列组合成平均折射率为零的一维光子晶体.该光子晶体在特定频段具有光子带隙,带隙不随晶格尺度和入射角的变化而改变.通过掺杂技术破坏光子晶体的周期性,可在禁带中引入缺陷模,这种结构的光子晶体可用于实现滤波器小型化和超强耦合.研究表明,通过调节缺陷的厚度可以控制缺陷模的频率,这为调节频率提供了一种方法.实验与仿真结果相符. 关键词： 左手材料 复合左右手传输线 光子晶体     

Z箍缩丝阵负载区域的似稳态磁场分布

 将负载区域的电流（丝阵电流、阴极板电流、阳极板电流和回流柱电流）离散成电流线或电流面等电流微元,根据毕奥-萨伐尔定律,计算所有电流微元在指定场点的磁场,再通过叠加给出该点的总磁场。研究结果发现:在丝阵外围区域,仅由丝阵电流所产生的磁场偏离无限长直导线磁场公式的值,但全部电流所产生的总磁场与公式给出的值很接近。同时,研究了不同负载结构参数下的磁场分布,结果表明：增加丝根数有助于减小单根丝表面的局部磁场,改善丝阵外围磁场分布的均匀性。     

Use of 2, 3-Butanedione Monoxime for Homogeneous Precipitation of Nickel (II)

Abstract

The solid monoxime of 2, 3-butanedione is a more convenient material than liquid dione for the homogenous generation of DMG. 2, 3-butanedione dioxime. Determinations of Ni in steels and in pure Ni(II) solutions have shown the optimum pH and order of adding reagents. Gravimetric and/or an EDTA titrimetric finish are possible for a method of reliability within ± 0.2 mg of Ni in 50–150 mg Ni. The solid has the same character and filterability as that from the 1960 dione method of Salesin and Gordon¹.     

An Efficient Four‐component Synthesis of Spiro[indoline‐pyrazolo[4′,3′:5,6]pyrido[2,3‐d]pyrimidine]triones

A four‐component reaction in the presence of Alum [KAl(SO₄)₂·12H₂O] as an inexpensive and reusable catalyst using the ionic liquid as an effective green reaction media is reported.     

Use of a Tensammetric Wave for the End-Point Detection in Chelatometry

Abstract

A new method for the end-point detection in complexometric titration using a tensammetric wave of organic reagents such as oxine and alizarin complexone (ALC) was studied. The tensammetric wave of these reagents disappears by their chelate formation and reappears by the liberation of free indicator during the exchange reaction between indicator chelate and EDTA. This mechanism is utilized for the end-point detection in complexometric titration of metals. Since the sensitivity of tensammetric wave is extremely high, very sharp end-point can be obtained for the titration of metals even in the concentration of 10^?5M.     

Two diamond-type octacyanometallate(IV)–nickel(II) assemblies chelated by macrocyclic ligands

Two octacyanometallate-based Ni^II–M^IV [M?=?Mo(1), W(2)] bimetallic assemblies chelated with tetradentate macrocyclic ligands have been synthesized by slow diffusion and characterized structurally. In both complexes, M and Ni centers acting as linker and connector, respectively, are connected by M–CN–Ni–NC–M linkages to form a 3-D diamond-type topological network. Magnetic behaviors of both complexes show a very weak antiferromagnetic interaction between Ni^II ions mediated by the diamagnetic [M(CN)₈]^4? bridges.