ON THE FREE VIBRATION OF A SUBMERGED FGM HOLLOW SPHERE

The free vibration of a functionally graded material hollow sphere submerged in a compressible fluid medium is exactly analyzed. The sphere is assumed to be spherically isotropic with material constants being inhomogeneous along the radial direction. By employing a separation technique as well as the spherical harmonics expansion method, the governing equations are simplified to an uncoupled second-order ordinary differential equation, and a coupled system of two such equations. Solutions to these equations are given when the elastic constants and the mass density are power functions of the radial coordinate. Numerical examples are finally given to show the effect of the material gradient on the natural frequencies. The project is supported by the National Natural Sciences Foundation of China(No. 19872060).     

离子交换法合成钴酸锌纳米空心材料及磁性

采用所合成的四氧化三钴纳米立方颗粒作为前驱体,在相对低温的水热条件下,通过反应体系中自身存在的扩散作用和离子交换作用,可控制备了钴酸锌纳米空心材料。利用SEM、TEM、EDS和XRD等测试方法对样品进行了形貌、结构、组成和物相的表征。结果表明,所得钴酸锌纳米盒粒径均匀,分散度好;钴酸锌纳米盒颗粒大小约为20nm,整个纳米盒为单晶。研究了钴酸锌纳米盒的生长机理。对所制备的材料进行了磁学性质测试,结果显示,尖晶石型结构钴酸盐纳米材料的磁性大小可以通过改变实验条件而加以调变。     

中空SiO_2纳米微球的制备与表征

在乙醇/氨水介质中,将SiO2包覆在聚乙烯吡咯烷酮(PVP)功能化的聚苯乙烯(PS)微粒表面,利用一步法得到了中空纳米二氧化硅微球;研究了影响中空纳米二氧化硅微球形成的主要因素,并探讨了中空纳米SiO2微球的可能形成机理.结果表明,在一定的反应时间下,当氨水用量为0.6 mL、温度为70℃时,可以获得空心结构的SiO2纳米微球;通过控制四乙基原硅酸盐(TEOS)的量可以调节微球的包覆层厚度.     

Determination of aristolochic acid in urine using hollow fiber liquid-phase microextraction combined with high-performance liquid chromatography

A simple and efficient hollow fiber liquid‐phase microextraction (HF‐LPME) technique in conjunction with high‐performance liquid chromatography is presented for extraction and quantitative determination of aristolochic acid I in human urine samples. Several parameters influencing the efficiency of HF‐LPME were investigated and optimized, including extraction solvent, stirring rate, extraction time, pH of donor phase and acceptor phase. Excellent sample clean‐up was observed and good linearity with coefficient of 0.9999 was obtained in the range of 15.4–960 µg/L. This method provided a 230‐fold enrichment factor and good repeatability with relative standard deviations (RSD) lower than 6.0%. The limit of detection value for the analyte in urine sample was 0.01 µg/L at a signal‐to‐noise ratio of 3. The extraction recovery from urine samples was 61.8% with an RSD of 9.71%. Copyright © 2010 John Wiley & Sons, Ltd.     

空心光束的产生及其在现代光学中的应用

近年来,随着激光应用技术的发展,各种中心强度为零的激光束被相继产生,并正在形成一个新颖的所谓空心光束(也称暗中空光束)的大家族。作为激光导管、光学镊子(光钳)和光学扳手,空心光束在微观粒子(如微米粒子、纳米粒子、自由电子、生物细胞和原子或分子等)的精确、无接触操纵和控制中有着广泛的应用。本文将首先给出空心光束的定义及其参数,并详细介绍各种空心光束产生的基本原理、方法及其实验结果。其次,就空心光束的分类及其应用场合进行了简单归纳与讨论。最后就空心光束在微观粒子(包括微米粒子、纳米粒子、生物细胞和自由电子等)的光学囚禁与操控中的应用进行简要综述,并就空心光束的产生与应用及其未来研究与应用前景进行了简短总结与展望。     

THz波在金属镀层空芯波导中传输的理论和实验研究

本文基于微扰法求得不同金属镀层空心圆波导中各模式的损耗系数,对金属镀层空芯波导中THz波传输损耗随金属材料、波导结构等参数的变化关系进行了数值模拟.根据数值分析结果,优化设计并拉制了内径为1.1 mm的镀银空芯波导,实验测得当THz波的频率为2.5 THz时,传输损耗为8.6 dB/m,实现了THz波短距离的有效传输. 关键词： 太赫兹波 金属空芯波导 传输损耗     

Fabrication of solid oxide fuel cell based on doped ceria electrolyte by one-step sintering at 800 °C

Ce_0.8Gd_0.05Y_0.15O_1.9 (GYDC) electrolyte was prepared by a carbonate co-precipitation method. Lithium nitrate at 1, 1.5, 2 and 3 mol% was added to GYDC as sintering additive. 96% relative density was achieved for GYDC at sintering temperature of 800 °C with addition of 1.5 mol% LiNO₃. The conductivities of GYDC with sintering aids LiNO₃ were measured by a.c. impedance spectroscopy and showed comparable values to that of pure GYDC sample sintered at 1400 °C. A single cell with 1.5 mol% LiNO₃ infiltrated GYDC electrolyte was fabricated by sintering at 800 °C for only 2 h. Lithiated NiO was synthesized by the glycine-nitrate combustion method and employed as cathode material. The cell was tested at temperatures from 500 to 575 °C and a maximum power density of 73 mW cm^− 2 was obtained at 575 °C. These preliminary results indicate that LiNO₃ is a very effective sintering additive for intermediate temperature solid oxide fuel cell fabrication.     

中空Ta_2O_5/TiO_2复合光催化剂的可控氧化制备及性能

以钛粉、钽粉为原料,炭黑作为反应性模板,通过熔盐法在炭黑表面原位生长了TaTiC_2纳米碳化物涂层,并以所得TaTiC_2/C复合物为碳化物前驱体,再经可控氧化制备出中空Ta_2O_5/TiO_2复合光催化剂。采用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见(UV-Vis)漫反射(DRS)及N2物理吸附等手段对所制备的光催化剂进行形貌、显微结构及孔结构表征。以高压汞灯为紫外光源,以亚甲基蓝为目标降解物,通过光催化降解实验评价中空Ta_2O_5/TiO_2复合光催化剂的光催化活性。结果表明,熔盐法生长碳化物涂层厚度均匀(20~30 nm),碳化物主要以TaTiC_2晶相存在且具有纳米级的颗粒尺寸。中空Ta_2O_5/TiO_2复合光催化剂同时具有200 nm左右的中空大孔结构及壳层10 nm左右的介孔结构。中空大孔和介孔的存在提高了所制备催化剂对亚甲基蓝的吸附能力。此外,TiO_2与Ta2O5通过电子能带结构的耦合,有效提高了光生电子和空穴的分离效率,从而显著提高了光催化活性。nTi∶nTa=2.5∶1.5时,相应的中空Ta_2O_5/TiO_2复合光催化剂表现出最佳的光催化活性,对亚甲基蓝的紫外光催化降解率高达97%。     

NiO/γ-Al2O3催化剂中NiO与γ-Al2O3间的相互作用

利用溶胶－凝胶法制备了不同含量的 ＮｉＯ／γ－Ａｌ_２Ｏ_３催化剂,通过ＸＲＤ,ＸＰＳ和 ＴＰＲ等技术考察了制备方法、ＮｉＯ含量和焙烧温度对催化剂结构和Ｎｉ存在状态的影响,发现溶胶－凝胶法制备的催化剂活性组分ＮｉＯ与担体γ－Ａｌ_２Ｏ_３间具有强相互作用．详细地讨论了Ｎｉ物种的还原状态与以“Ｎｉ~０”为活性中心的催化反应的活性之间的关系．溶胶－凝胶法制备的催化剂经高温焙烧后,Ｎｉ以一种类尖晶石结构的固溶体形式存在,这种固溶体态尖晶石可能会抑制Ｎｉ的烧结和流失,提高催化剂的稳定性．     

Studying the Effect of the Spatial Frequency and Amplitude of Corrugation on the Stress–Strain State of Cylindrical Shells

An approach developed earlier to solve two-dimensional static problems for noncircular cylindrical shells is used to analyze the effect of the spatial frequency and amplitude of corrugation on the stress–strain state of shells. The results of the analysis are presented in the form of plots and tables