(Ni0.81Fe0.19)1－xCrx作为种子层对NiFe/PtMn双层膜交换偏置的影响

将NiFe/PtMn双层膜生长在(Ni_0.81Fe_0.19)_1-xCr_x种子层材料上，通过改变种子层中Cr的原子含量，系统的研究了NiFe/PtMn双层膜中PtMn晶粒尺寸和织构对交换偏置的影响.对退火270℃，5h后的NiFe/PtMn双层膜磁性的研究表明,PtMn织构强弱对交换偏置场的影响不明显，而PtMn的晶粒尺寸是影响交换偏置场的主要因素，PtMn颗粒的相干长度在11.3nm左右时得到了较大的交换偏置场. 关键词： NiFe/PtMn双层膜 交换偏置场     

Immobilization of palladium nanoparticles as a recyclable heterogeneous catalyst for the Suzuki–Miyaura coupling reaction

This work describes the synthesis of Pd nanoparticles that are stabilized on CaAl-layered double hydroxide functionalized with Tris (tris(hydroxymethyl)aminomethane). The synthesized catalyst is characterized by several different analyses and has been successfully applied to the Suzuki–Miyaura reaction.     

Oxidation ofn-butane and propene on exhydrotalcite Mg, Al, Fe mixed oxides

Oxidative dehydrogenation ofn-butane and propene has been studied on six Mg−Al−Fe oxide catalysts prepared by thermal decomposition of layered double hydroxides with a hydrotalcite-like structure, possessing Mg²⁺ and Al³⁺ ions in the brucite-like layers, and hexacyanoferrate in the interlayers. In all cases, CO₂ and H₂O are formed, together with minor amounts of ethylene and methane. On the solids prepared from hexacyanoferrate(II), formation of benzene is also observed.     

Synthesis of [Zn-Al-CO3] layered double hydroxides by a coprecipitation method under steady-state conditions

A continuous co-precipitation method under steady-state conditions has been investigated for the preparation of nanometer-size layered double hydroxide (LDH) particles using Zn₂Al(OH)₆(CO₃)_0.5·2H₂O as a prototype. The objective was to shorten the preparation time by working without an aging step, using a short and controlled residence time in order to maintain a constant supersaturation level in the reactor and constant particle properties in the exit stream over time. The effects of varying the operating conditions on the structural and textural properties of the LDHs have been studied, including total cation concentration, solvent, residence time, pH and intercalation anion. The products have been characterized using ICP, XRD, FTIR, BET, SEM and TEM. The LDHs prepared by the continuous coprecipitation method have a poorer crystallinity and lower crystallite sizes than those synthesized by the conventional batch method. The results have shown that increasing either cation concentration or the fraction of monoethylene glycol (MEG) in MEG/H₂O mixtures up to 80% (v/v) affect salt solubility and supersaturation, which gives rise to smaller crystallites, larger surface areas and more amorphous compounds. This increase is however limited by the precipitation of zinc and aluminum hydroxides occurring around a total cation concentration of 3.0×10⁻¹ M in pure water and 3.0×10⁻² M in H₂O/EtOH mixtures. Crystallite size increases with residence time, suggesting a precipitation process controlled by growth. Finally, the continuous coprecipitation method under steady-state conditions has been shown to be a promising alternative to the traditional coprecipitation technique in either pure water or mixed H₂O/MEG solvents.     

表面水热碳层对磁性NiFe2O4八面体光催化活性的影响

采用葡萄糖水热碳化法合成了一系列碳层包覆的NiFe₂O₄核壳八面体(NiFe₂O₄@C). 通过调控葡萄糖的含量可以有效控制NiFe₂O₄表面包覆的碳层厚度. 利用X射线衍射(XRD)、 拉曼光谱(Roman)、 X射线光电子能谱(XPS)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和紫外-可见漫反射光谱(UV-Vis DRS)等对NiFe₂O₄@C的组成、 结构、 形貌和光学性能进行了表征. 考察了表面水热碳层对NiFe₂O₄光催化降解亚甲基蓝(MB)性能的影响. 结果表明, NiFe₂O₄的光催化活性很大程度上依赖于在其表面包覆的碳层厚度, 碳层厚度为5.5 nm的NiFe₂O₄@C-3展现了最佳的光催化活性. 荧光光谱(PL)、 瞬态光电流和电化学阻抗谱(EIS)表征结果证明, NiFe₂O₄@C的光催化性能的提升归因于在NiFe₂O₄核和碳壳之间形成了异质结, 有效地促进了光生载流子的传输和分离效率. NiFe₂O₄@C复合材料展现了较好的稳定性和可回收性, 在污水处理方面有很大的应用潜力.     

Solubility and release of fenbufen intercalated in Mg, Al and Mg, Al, Fe layered double hydroxides (LDH): The effect of Eudragit S 100 covering

Following different preparation routes, fenbufen has been intercalated in the interlayer space of layered double hydroxides with Mg²⁺ and Al³⁺ or Mg²⁺, Al³⁺ and Fe³⁺ in the layers. Well crystallized samples were obtained in most of the cases (intercalation was not observed by reconstruction of the MgAlFe matrix), with layer heights ranging between 16.1 and 18.8 Å. The presence of the LDH increases the solubility of fenbufen, especially when used as a matrix. The dissolution rate of the drug decreases when the drug is intercalated, and is even lower in those systems containing iron; release takes place through ionic exchange with phosphate anions from the solution. Preparation of microspheres with Eudragit^® S 100 leads to solids with an homogeneous, smooth surface with efficient covering of the LDH surface, as drug release was not observed at pH lower than 7.     

Photooxidation of polypropylene/layered double hydroxide nanocomposites: Influence of intralamellar cations

The influence of layered double hydroxides (LDHs) on the photooxidation of polypropylene (PP)/LDH nanocomposites was studied under irradiation at long wavelengths (λ > 300 nm, 60 °C and in the presence of oxygen). The influence of hybrid LDHs containing different divalent cations (Mg, Zn or both Mg and Zn) on the photooxidation mechanism of PP and on the rates of oxidation of the matrix was characterised based on infrared analysis. The presence of LDHs modifies the photoproducts accumulating in the PP and the rates of oxidation of PP were changed depending on the divalent cations in the LDH layers. Whereas natural clays, such as montmorillonite (MMt), can lead to a faster degradation of the materials, LDHs (Zn₂-Al-DS, for example) appear to have no inductive effect on polymer oxidation.     

Preparation and burning behaviors of flame retarding biodegradable poly(lactic acid) nanocomposite based on zinc aluminum layered double hydroxide

A flame retarding biodegradable polylactic acid (PLA) nanocomposite based on flame retardant composites (containing ammonium polyphosphate (APP), pentaerythritol (PER) and melamine cyanurate (MC) by controlling the weight ratio was 2:2:1) and organomodified zinc aluminum layered double hydroxide (Zn-Al-LDH) has been prepared by melt-compounding directly. The morphology and burning behaviour of nanocomposite with 2 wt% Zn-Al-LDH loadings were investigated. The extent of dispersion of LDH was quantified by wide angle X-ray scattering (WAXS) and transmission electron microscopy (TEM), illuminating the good dispersion state for ZnAl-LDH in the PLA matrix. Significant improvements in fire retardant performance were observed for the nanocomposite from microscale combustion calorimeter (MCC) and cone calorimetry (reducing both the heat release rate and the total heat released). It revealed that incorporation of FR and ZnAl-LDH was very efficient in improving the flame retardance of PLA composite.     

Heterogeneous Baeyer-Villiger oxidation of ketones with H2O2/nitrile, using Mg/Al hydrotalcite as catalyst

We synthesized a magnesium-aluminium hydrotalcite and used it as a catalyst in the Baeyer-Villiger (BV) oxidation of cyclohexanone with a mixture of 30% aqueous hydrogen peroxide and benzonitrile as oxidant. The hydrotalcite proved an excellent catalyst for the process. The influence of experimental variables was examined in depth in order to bring the working conditions as close as possible to those usable on an industrial scale. We optimized the cyclohexanone/hydrogen peroxide/benzonitrile proportion and used various nitriles, solvents and amounts of catalyst, benzonitrile and methanol proving the most effective nitrile and solvent, respectively, for the intended purpose. The reaction was found to occur to an acceptable extent with other carbonyl compounds as substrates; by exception, α,β-unsaturated carbonyl compounds provided poor results by effect of their undergoing competitive epoxidation of their double bonds.     

甘氨酸存在条件下水热合成可层离双氢氧化物

Exfoliative Mg/Al layered double hydroxide (Mg/Al-LDHGly) was obtained via hydrothermal synthesis in the presence of glycine. The product prepared by hydrothermal reaction for 10 h at 120 ℃ possesses high thermal stability and maximal crystallite size in a, c directions. TEM and SEM analyses show that Mg/AlLDHGly was of well-crystallized hexagonal product with stacks of slightly curved layers. Benefiting from mechanism investigation on its gradual delamination in formamide, rapid delamination of Mg/Al-LDHGly at room temperature was realized, which provided fundamental for preparation of (Mg/Al-LDHGly)/polymer nanocomposites by using exfoliation-adsorption method.