Thick Silicate Film by an Interfacial Polymerization

A thick silica gel film, corresponding to the glass film of 10–20 micron in thickness, has been formed at the interface between two immiscible liquids, hexane and water, using E-40, a partially polymerized silicon alkoxide, as the precursor. The film formation was possible using both acid- and base-catalyzed water, but was greatly dependent on the type of catalyst. Only the trace of a film was observed for the system catalyzed with a strong electrolyte such as HCl, HNO₃ or NaOH, while a gel film, corresponding to the glass film of several to 10 micron in thickness was formed with a weak electrolyte such as ammonia, organic acid like acetic acid, citric acid, etc., of similar pH value. The direct introduction of organic base catalyst like triethylamine in hexane was much more effective than the use of ammonia water, suggesting that the polymerization of E-40 to form a gel film takes place in the organic phase, where water molecules, as well as undissociated ammonia or organic acids, can diffuse in.     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

Pt immobilized spontaneously on porous MXene/MAX hybrid monolith for hydrogen evolution reaction

Designing efficient electrocatalysts with low Pt loadings for hydrogen evolution reaction(HER) is urgently required for renewable and sustainable energy conversion.Here,we report a strategy that Pt nanoparticulates are spontaneously immobilized on porous MXene/MAX monolith as HER catalysts by utilizing the redox reaction between Ti_3C_2T_x MXene and [PtCl_4]~2 in H_2 PtCl_6 aqueous solution.By taking advantage of homogeneously distributed Pt nanoparticulates on highly electrically conductive porous Ti_3C_2T_x/Ti_3AlC_2 monolith,the as-prepared electrocatalysts show high catalytic performance for hydrogen evolution.Specifically,the binder-free electrocatalysts have Pt loadings as low as 8.9 μg/cm~2,with low overpotential of 43 mV at a curre nt density of 10 mA/cm~2 and low Tafel slope that three times lower than porous Ti_3C_2T_x/Ti_3AlC_2 without Pt loading.This strategy offers a new approach to constructing ultra-low Pt-loading HER catalysts on the basis of in situ redox reaction between noble metal ions and MXenes.     

含松香骨架的新型手性季铵盐相转移催化剂的合成及其在不对称环氧化反应中的应用

以天然松香为原料合成了4个新型手性季铵盐类相转移催化剂, 并用于催化不对称查尔酮环氧化反应, 发现这类手性相转移催化剂可以有效地催化查尔酮的不对称环氧化, 环氧化产物ee最高达20%.     

Improvement of the Pd/Al2O3 Catalyst by the Control of the Sol-Gel Preparative Parameters

In this work, the metal dispersion of the Pd/Al₂O₃ catalyst prepared by sol-gel method is improved by an adequate optimisation of the preparative variables. First, the gelation temperature and the ageing time are selected, in order to avoid the reduction of the metal precursor (palladium acetylacetonate, Pd(acac)₂) by the solvent (sec-butanol, sB). The metal sintering effect on the catalysts treated in oxygen at 500°C is then minimized when the alumina pore size is controlled by the variation of the alumium alkoxide (AsB) concentration and the acetic acid amount ([AcA]/[AsB]). The appearance of new palladium particles on the alumina surface and the matching between the particle diameters and the pore sizes were also effective for the metallic surface area improvement on the samples treated in oxygen at 800°C. Compared to the reference catalysts, the higher metal dispersion obtained on the sol-gel ones was the determinant factor for their higher catalytic activity in methane combustion.     

费-托合成铁-钼/活性炭催化剂还原和碳化的穆斯堡尔谱研究

以原位穆斯堡尔谱研究了活性炭担载的费-托合成铁-钼双金属催化剂的还原和碳化行为。在H_2中不同温度下还原催化剂,其中的Fe~(3+)还原为Fe~(2+),进而还原为Fe~0。但在400—450℃间发生了还原铁物类的再氧化现象,可归因于磷钼酸根Keggin结构的热分解。在500℃H_2中,铁和钼都还原为金属并形成合金,其穆斯堡尔谱为一单峰,同质异能移为-0.16mm/s。再在300℃合成气(2H_2/CO)中碳化,可生成Fe-Mo碳化物(Fe_(1-y)Mo_y)_xC,穆斯堡尔谱为δ～0.17mm/s,△～0.64mm/s的双峰。     

High-resolution laser spectroscopy on H2 at 97–98 nm

A narrowband tunable eXtreme UltraViolet (XUV) laser source is used for a high resolution study of the Lyman (B ¹ _u ⁺ X ¹ _g ⁺ ) band system of molecular hydrogen. Seven rotational transitions of two vibrational bands, (10,0) and (11,0), in the wavelength range from 97.2–98.3 nm have been investigated for the first time under sub-Doppler molecular beam conditions. A calibration procedure using the I₂ standard in the visible yielded an absolute frequency accuracy of 0.02 cm^–1. The obtained H₂ transition frequencies provide a calibration standard in the extreme ultraviolet wavelength region.     

Synthesis of N-unsubstituted ketene aminals from β-ketocarboxylic esters and cyanamide

The interaction of cyanamide with -ketocarboxylic esters in the presence of Ni(acac)₂ affords N-unsubstituted aminals of acyl(alkoxycarbonyl)ketenes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 419–421, February, 1993.     

固体铁系超强酸的制备及催化水杨酸异丙酯的合成

报道固体铁系超强酸作为酯化催化剂，并研究了用此催化剂催化合成水杨酸异 丙酯，实验结果表明：水杨酸与异丙醇的投料比n酸：n醇＝1：6，催化剂的用量占 反应物总投料质量的6％，反应时间为4h,得产物水杨酸异丙酯，其产率达到94．5 ％，同时对催化剂的催化性能进行了讨论。     

A simpler and greener protocol for the preparation of β-acetylamino ketones by a one-pot reaction of aryl aldehydes, enolisable ketones, acetyl chloride and acetonitrile in the presence of zeolite Hβ as a reusable catalyst

β-Acetylamino ketones have been obtained in a one-pot coupling of an aldehyde with an enolisable ketone, acetyl chloride and acetonitrile in the presence of zeolite Hβ as catalyst at room temperature (26-28 °C). The procedure has the advantages of mild workup, circumvention of high temperature and inert atmosphere. The catalyst was found to be recyclable.