Y2O3薄膜处理对3Cr25Ni7N合金的抗高温氧化性能的影响

采用电沉积-热解法在3Cr25Ni7N合金表面制备了Y2O3薄膜,并研究了薄膜处理对合金在1000℃空气中的抗高温氧化性能的影响。氧化动力学曲线、SEM及XRD分析结果表明,Y2O3薄膜处理使合金表面氧化膜以尖晶石结构为主,氧化膜致密,有效地抑制了Cr2O3的挥发反应,且氧化膜与基体的附着性好,因此合金在高温下的抗氧化性能得到提高,这与氧化钇薄膜在较低温度下抗高温氧化性能提高的机制是不同的。在不同温度下,Y2O3薄膜处理均可以有效提高合金的抗高温氧化性能。     

Raney Ni催化生物基糠醛还原胺化合成糠胺

生物质衍生物糠醛还原胺化是合成糠胺的一种有效方法。本文以糠醛为原料、氨水为氨源,使用商业Raney Ni催化糠醛还原胺化合成糠胺,考察了氢压、温度、n(糠醛)/n(氨水)、溶剂、催化剂用量等条件对反应的影响。实验结果表明：在1,4-二氧六环溶剂中,0.03 g Raney Ni、n(糠醛)/n(氨水)=1/2、130 ℃、2.0 MPa H₂条件下反应3 h,糠醛转化率100%,糠胺选择性96.3%。与传统方法相比,该工艺实现了非贵金属催化剂作用下高选择性反应,具有操作简单、低成本、收率高等优点。      

Synthesis, characterization, antitumor activity of nickel(Ⅱ) and cobalt (Ⅱ) complexes of 2,2''''-diamino-4,4''''-bithiazole and their interaction with dGMP

New complexes,of bis(2,2'-diamino-4,4'-bithiazole)sulfate nickel(Ⅱ) and bis(2,2'-diami-no-4,4'-bithiazole)sulfate cobalt(Ⅱ),have been prepared.The complexes were characterized by infrared and UV-Vis spectroscopy,1H NMR,elemental analyses and molar conductivity.The effect of these complexes on the DNA synthesis of sarcoma 180 cells has been studied by the technique of isotopic liquid scintillation.The results indicated that complexes show ability to inhibit DNA synthesis of the tumor cells.In order to provide a molecular basis for understanding the biological effects,the probe,[trana-en2Os(η2-H2)](CF3SO3)2 (en,ethylenediamine) as a monitor was first used to explore interaction of the complexes with 2'-deoxyguanosine-5'-monophosphate (dGMP).     

用Xα方法对CH4在Ni(Ⅲ)表面吸附解离反应的理论研究

用Ｘ_α方法对ＣＨ_４在Ｎｉ（Ⅲ）表面吸附解离反应的理论研究马晨生,马理,杨忠志（吉林大学理论化学研究所,长春,１３００２３）关键词ＣＨ_４／Ｎｉ（Ⅲ）吸附体系,原子簇模型,ＣＨ_４／Ｍｉ_７,ＭＳ－Ｘ_α－ＳＣＦ方法甲烷在Ｎｉ表面的催化重整反应在工业和国...     

镍基甲烷化催化剂中的助剂作用 Ⅱ重稀土氧化物添加剂的结构效应和电子效应

应用ＢＥＴ、气相色谱、红外光谱、竞争加氢反应和ＸＰＳ等方法,在以前工作的基础上继续考察了Ｙ２Ｏ３、Ｓｍ２Ｏ３、Ｅｕ２Ｏ３、Ｇｄ２Ｏ３、Ｔｂ４Ｏ７、Ｄｙ２Ｏ３、Ｅｒ２Ｏ３、Ｔｍ２Ｏ３、Ｙｂ２Ｏ３作为添加剂,对镍在γ－Ａｌ２Ｏ３表面的分散度、甲烷化活性、ＣＯ在镍上的吸附态及表面镍原子的电子状态的影响．结果表明,稀土氧化物添加剂不仅明显地提高了金属镍的分散度和甲烷化活性,还直接地影响表面镍原子的电子状态．对不同稀土氧化物,这些效应各异．作者认为,利用稀土氧化物添加剂调节表面镍原子的电子状态,可能成为改进甲烷化催化剂活性的一个有效途径．     

Ni-Mo氧化物超细粒子催化剂的制备与表征

以柠檬酸为络合剂,采用溶胶凝胶法制备NiMoO4超细粒子催化剂.使用DTA、BET比表面测定、XRD和LRS等表征手段考察了热处理条件和焙烧温度对粒子结构的影响.结果表明,在氩气气氛中于210℃分解干凝胶中的柠檬酸,可以避免柠檬酸分解时燃烧大量放热而引起超细微粒的烧结,脱除柠檬酸后的超细粉末为NiMoO4.经400℃以上的高温处理后,微粒明显晶化.     

Synthesis of ZnTiO3/tourmaline/Ni foam catalyst and enhanced photocatalytic performance

ZnTiO₃/tourmaline loaded on the nickel foam (ZnTiO₃/tourmaline/Ni-foam) is prepared by a facile coating method. Morphology and structure of the photocatalyst were characterized by X-ray diffraction (XRD), scanning electrons microscopy (SEM), raman spectroscopy, UV–vis diffuse reflectance spectrum (UV–vis DRS) and photoluminescence spectroscopy (PL). The photocatalytic properties of the materials were tested by using the Rhodamine B (RhB) solution as the target pollutant. The results indicates that the ZnTiO₃/tourmaline/Ni foam exhibited higher photocatalytic activity than that of ZnTiO₃ and ZnTiO₃/Ni foam under ultraviolet (UV) light irradiation, and its degradation rate was up to 99.2%. Moreover, the degradation rate remained at 91.3% after eight consecutive photocatalytic reaction cycles. The outstanding photocatalytic performances of ZnTiO₃/tourmaline/Ni foam was mainly attributed to the existence of tourmaline, which can help to inhibit the recombination of electron-hole paris, and the proper pore structure of the carrier. Meanwhile, the trapping experiments indicated that ·O₂^– was the main active species in the photocatalytic degradation of RhB.     

Multidisciplinary green approaches (ultrasonic,co-precipitation,hydrothermal, and microwave) for fabrication and characterization of Erbium-promoted Ni-Al2O3 catalyst for CO2 methanation

The dispersion of nickel catalysts is crucial for the catalytic ability of CO₂ methanation, which can be influenced by the fabrication method and the operation process of the catalysts. Therefore, a series of fabrication methods, including ultrasonic, hydrothermal, microwave, and co-precipitation, have been applied to prepare 25Ni-5Er-Al₂O₃ catalysts. The fabrication method can partially influence the structural and catalytic activity of the nickel aluminate catalysts. Among the catalysts modified by Erbium prepared with various methods, the catalyst fabricated by ultrasonic pathway exhibited better catalytic performance and CH₄ selectivity especially, at a temperature (400 ℃). The impact of the temperature of the reaction (200–500 °C) was examined under a stoichiometric precursor ratio of (H₂:CO₂) = 4: 1, atmospheric pressure, and space velocity (GHSV) of 25000 mL/gcath. The results demonstrate that the ultrasonic method is strongly efficient for fabricating Ni-based catalysts with a high BET surface area of about 190.33 m²g^?1. The catalyst composed via the ultrasonic technique has 69.38 % carbon dioxide conversion and 100 % methane selectivity at 400 °C for excellent catalytic performance in CO₂ methanation reactions. The fabrication effect can be associated with its high surface area, which is achieved via the hot spot mechanism. Besides, the addition of Erbium promotes the Ni dispersion on the supports and stimulates the positive reaction because of the erbium oxygen vacancies.     

耐蚀合金Al3Ni和Ni3Al液态冷凝过程的比较研究

采用F-S多体势对液态合金Al3Ni和Ni3Al在不同冷却速度下的微观结构及其转变机制进行了分子动力学模拟,得到了不同冷速下各温度的双体分布函数;采用HA键型指数法对其结构进行了分析,结果表明: Al3Ni在两种冷速下均以非晶的形式出现,只是慢冷时体系的有序度略有升高;而Ni3Al的结构及能量转变受冷速影响较大,快冷时形成非晶,而慢冷时出现明显结晶;同样冷速下Al含量较少的Ni3Al体系的有序度高,更易形成晶体,晶体的形成过程中有能量突变.