用ZCTC晶体倍频半导体激光的紫光输出

报道了新型金属络合物非线性光学材料ZCTC（硫氰硫锌镉）晶体的光学性质。测量了ZCTC晶体的折射率,计算了其相位匹配角度。进行了半导体激光（LD）室温下直接倍频实验。当808nm基频GaAlAs半导体激光功率为473mW时,获得了390μW、4040μnm紫光输出。实验表明ZCTC晶体是一种优良的半导体激光倍频紫外非线性光学材料。     

Measurement of στ product of solid state laser materials by an alternative method: Application to Nd3+ doped YVO4 crystal for 4 F 3/2→4 I 11/2 transition

In this paper an alternative approach for measurement of στ product for ⁴ F _3/2→⁴ I _11/2 transition of Nd³⁺ doped YVO₄ crystal is reported. In this method a microchip laser is formed by keeping a small piece of the sample in plane-plane resonator and a diode laser (808 nm) is used for pumping. The pump power induced thermal lensing effect is used to make the cavity stable. The cavity mode area is estimated by measuring the thermal lens focal length at the threshold and the average pump area is measured by Gaussian fit to the intensity profiles of the pump beam. The value of στ product of Nd:YVO₄ crystal obtained by this method is within 10% of the reported values. The advantage of this method is that it is a simple method for direct measurement of στ product of laser crystals.     

Determination of the Gamow–Teller strength function for the neutron-deficient isotopes In

The Gamow–Teller β decays of the neutron-deficient indium isotopes ^104–107In have been investigated by using total absorption γ-ray spectrometry on mass-separated sources. The experimental Gamow–Teller strength, deduced as a function of the excitation energy in the daughter nuclei ^104–107Cd, is compared to shell-model predictions.     

电子初始能量对双向流二极管空间电荷限制流密度的影响

从理论上研究了阴极发射电子初始能量对一维平面非相对论性双向流二极管内空间电荷限制电子、离子流密度的影响,并与阴极发射电子初始能量为0情况下的空间电荷限制电子、离子流密度进行了比较。     

Application of magneto-optical method for real-time visualization of eddy currents with high spatial resolution for nondestructive testing

In this paper we describe a new, laser supported, eddy current microscope for the real-time visualization of eddy current distributions. In the experimental set-up, the induction of eddy currents is conventionally performed by an alternating current excitation coil above the object surface. The magnetic field induced by the eddy currents is detected by the use of the Faraday effect. For that purpose, a laser beam is passed through a suitable thin crystal integrated in the excitation coil. The polarization direction of the laser beam is rotated in this thin crystal depending on the local magnetic field. The area distribution of the rotation angle is transformed into a grey value picture using an optical set-up, which comprises a conventional microscope, a lighting technique, an analyzator, and a CCD sensor. By choosing a suitable optic, a real-time measurement of the magnetic field with a high spatial resolution can be carried out. In this paper, the basic physics and the design of the new microscope are described. The initial results of experimental investigations concerning the resolution power of magneto-optic eddy current sensors are presented and compared with conventional eddy current sensors.     

Fringe Locking in a Laser Diode Interferometer under Both Mirror Vibration and Injection Current Modulation

We have found that the fringes in a laser diode interferometer can be locked even in the presence of mirror vibration and injection current modulation. A theoretical analysis explains the fringe locking phenomenon. The dependence of wavelength change on both PZT (piezoelectric transducer) mirror vibration and the injection current variation are calculated using a model of coupled resonators consisting of the laser cavity and the interferometer. The fringe phase change caused by the vibration and modulation of the current is derived from this model, and was proven to be suppressed within much less than 2ϖ in excess of an integer multiple of 2ϖ.     

新型成像技术的实验系统研究

光学相干层析成像是一种新型成像技术。超辐射发光二极管和超短脉冲飞秒激光是能满足成像系统要求的理想光源。在开展光学相干层析相关技术研究的基础上 ,建立了国内第一台上述两种光源的成像实验研究装置 ,对系统的横向、纵向分辨率等基本性能进行了测定 ;并对多种实际样品进行了层析成像。     

超薄层BCP对有机电致发光器件性能的影响

采用真空热蒸镀的方法,在常规的双层器件结构的基础上,设计了三层双异质结有机电致发光器件(OLED):indium-tin oxide(ITO)/N,N′-diphenyl-N,N′-bis(1-naphthyl)(1,1′-biphenyl)-4,4′-diamine(NPB)/2,9-dimethyl-4,7-diphenyl-1,10-phenan throline(BCP)/8-hydroxyquinoline aluminum(Alq3)/Mg∶Ag。通过对器件的电致发光(EL)光谱及器件性能的表征,研究了不同超薄层BCP的厚度对OLED器件性能的影响。结果表明,当超薄层BCP的厚度从0.1nm逐渐增加到4.0nm时,器件的EL光谱实现了绿光→蓝绿光→蓝光的变化;BCP层有效地调节了载流子的复合区域,改变了器件的发光颜色,提高了器件的亮度和发光效率。     

一种实用化实时测温系统工作波长优化设计的进一步分析

基于Kirchhoff定律,依照测温系统的各主要技术参数与各主要技术指标(温度分辨力、测温灵敏度、相对测温灵敏度及测温准确度)之间的关系,对利用激光并采用钽酸锂热释电探测器作光电转换器件的实用化实时测温系统的工作波长进行了进一步的优化设计.实验表明,在测温范围400~1200 ℃内,系统的测温误差符合设计要求.     

二极管侧面抽运Nd∶YAG 4波长同时输出激光

为了获得1064nm,1319nm,589nm及660nm 4波长激光同时输出,设计了双激光晶体同步声光调Q“T”型复合谐振腔。通过软件模拟与计算,筛选出理想的谐振腔参数,使2波长基频光在大泵浦电流范围内能稳定运转。以KTP晶体和LBO晶体为和频晶体和倍频晶体,在泵浦电流为17A,重复频率为10kHz时,获得了1064nm,1319nm,589nm和660nm 4波长激光输出,最高平均功率分别为150mW,80mW,2.3W和1.7W,同时测得589nm激光和660nm激光的脉冲宽度分别为110ns和130ns。结果表明：使用热稳“T”型复合腔,可以获得4波长激光同时稳定输出。