Te溶剂Bridgman法CdMnTe晶体核辐射探测器的制备和表征

碲锰镉(CdMnTe)作为性能优异的室温核辐射探测器材料,可用于环境监测和工业无损检测领域。本文中采用Te溶剂Bridgman法生长In掺杂Cd_0.9Mn_0.1Te晶体,制备成10 mm×10 mm×2 mm大小的室温单平面探测器,研究了该探测器对²⁴¹Am@59.5 keV γ射线源的能谱响应。通过表征红外透过率、电阻率以及探测器能谱响应等参数,综合评定了探测器用CdMnTe晶体的质量、电学和探测器性能。结果表明,晶片的红外透过率均在55%以上,最好可达到60%。采用湿法钝化,100 V偏压下的漏电流由钝化前的9.48 nA降为钝化后的7.90 nA,钝化后的电阻率为2.832×10¹⁰ Ω·cm。在-400 V反向偏压下,CdMnTe探测器对²⁴¹Am@59.5 keV γ射线源的能量分辨率在钝化前后分别为13.53%和12.51%,钝化后的电子迁移率寿命积为1.049×10^-3 cm²/V。研究了探测器的能量分辨率随电压的变化特性,当偏压≤400 V时,探测器的能量分辨率主要由载流子的收集效率决定,而当偏压>400 V时,能量分辨率由漏电流决定。本文研究结果表明,Te溶剂Bridgman法生长的CdMnTe晶体质量较好,电阻率和电子迁移率寿命积满足探测器制备需求。     

Millimeter-Wave Spectroscopy of Methylfuran Isomers: Local vs. Global Treatments of the Internal Rotation

Methylfurans are methylated aromatic heterocyclic volatile organic compounds and primary or secondary pollutants in the atmosphere due to their capability to form secondary organic aerosols in presence of atmospheric oxidants. There is therefore a significant interest to monitor these molecules in the gas phase. High resolution spectroscopic studies of methylated furan compounds are generally limited to pure rotational spectroscopy in the vibrational ground state. This lack of results might be explained by the difficulties arisen from the internal rotation of the methyl group inducing non-trivial patterns in the rotational spectra. In this study, we discuss the benefits to assign the mm-wave rotational-torsional spectra of methylfuran with the global approach of the BELGI-Cs code compared to local approaches such as XIAM and ERHAM. The global approach reproduces the observed rotational lines of 2-methylfuran and 3-methylfuran in the mm-wave region at the experimental accuracy for the ground vt=0 and the first torsional vt=1 states with a unique set of molecular parameters. In addition, the V3 and V6 parameters describing the internal rotation potential barrier may be determined with a high degree of accuracy with the global approach. Finally, a discussion with other heterocyclic compounds enables the study of the influence of the electronic environment on the hindered rotation of the methyl group.     

Folding Free Energy Determination of an RNA Three-Way Junction Using Fluctuation Theorems

Nonequilibrium work relations and fluctuation theorems permit us to extract equilibrium information from nonequilibrium measurements. They find application in single-molecule pulling experiments where molecular free energies can be determined from irreversible work measurements by using unidirectional (e.g., Jarzynski’s equality) and bidirectional (e.g., Crooks fluctuation theorem and Bennet’s acceptance ratio (BAR)) methods. However, irreversibility and the finite number of pulls limit their applicability: the higher the dissipation, the larger the number of pulls necessary to estimate ΔG within a few kBT. Here, we revisit pulling experiments on an RNA three-way junction (3WJ) that exhibits significant dissipation and work-distribution long tails upon mechanical unfolding. While bidirectional methods are more predictive, unidirectional methods are strongly biased. We also consider a cyclic protocol that combines the forward and reverse work values to increase the statistics of the measurements. For a fixed total experimental time, faster pulling rates permit us to efficiently sample rare events and reduce the bias, compensating for the increased dissipation. This analysis provides a more stringent test of the fluctuation theorem in the large irreversibility regime.     

Raman Method in Identification of Species and Varieties,Assessment of Plant Maturity and Crop Quality—A Review

The present review covers reports discussing potential applications of the specificity of Raman techniques in the advancement of digital farming, in line with an assumption of yield maximisation with minimum environmental impact of agriculture. Raman is an optical spectroscopy method which can be used to perform immediate, label-free detection and quantification of key compounds without destroying the sample. The authors particularly focused on the reports discussing the use of Raman spectroscopy in monitoring the physiological status of plants, assessing crop maturity and quality, plant pathology and ripening, and identifying plant species and their varieties. In recent years, research reports have presented evidence confirming the effectiveness of Raman spectroscopy in identifying biotic and abiotic stresses in plants as well as in phenotyping and digital selection of plants in farming. Raman techniques used in precision agriculture can significantly improve capacities for farming management, crop quality assessment, as well as biological and chemical contaminant detection, thereby contributing to food safety as well as the productivity and profitability of agriculture. This review aims to increase the awareness of the growing potential of Raman spectroscopy in agriculture among plant breeders, geneticists, farmers and engineers.     

Photo-Induced Reactions between Glyoxal and Hydroxylamine in Cryogenic Matrices

In this paper, the photochemistry of glyoxal–hydroxylamine (Gly–HA) complexes is studied using FTIR matrix isolation spectroscopy and ab initio calculations. The irradiation of the Gly–HA complexes with the filtered output of a mercury lamp (λ > 370 nm) leads to their photoconversion to hydroxyketene–hydroxylamine complexes and the formation of hydroxy(hydroxyamino)acetaldehyde with a hemiaminal structure. The first product is the result of a double hydrogen exchange reaction between the aldehyde group of Gly and the amino or hydroxyl group of HA. The second product is formed as a result of the addition of the nitrogen atom of HA to the carbon atom of one aldehyde group of Gly, followed by the migration of the hydrogen atom from the amino group of hydroxylamine to the oxygen atom of the carbonyl group of glyoxal. The identification of the products is confirmed by deuterium substitution and by MP2 calculations of the structures and vibrational spectra of the identified species.     

Microwave Plasmas at Atmospheric Pressure

Microwave plasmas at atmospheric pressure are used for surface treatments like for example cleaning, sterilization or decontamination purposes, for a pre‐treatment to increase the adhesion of lacquer, paint, or glue, and for the deposition of different kind of layers and coatings. Micro plasma jets can also be applied for biomedical applications and for treatment of small and complex geometries like for example the inside of capillaries. Larger plasma torches which exhibit higher gas temperatures can also be used for chemical syntheses like waste gas decomposition, methane pyrolysis, or carbon dioxide dissociation and for plasma spraying purposes. In the present publication an overview on the development and the investigation of the operating principle of two atmospheric pressure microwave plasma torches at frequencies of 2.45 GHz and 915 MHz will be presented. The plasma sources are based on a cylindrical resonator combined with coaxial structures. To explain how these plasma sources work, simulations of the electric field distribution will be discussed. Furthermore, some physical characteristics of an air and an Ar/H2 atmospheric plasma like gas temperatures, excitation temperatures and densities as well as the heating of the plasma by the microwave will be investigated. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Carbon Dioxide Measurement Based on Multimode Diode Laser Correlation Spectroscopy Employing Wavelength Modulation Techniques

The use of a tunable multimode diode laser system based on correlation spectroscopy and wavelength modulation spectroscopy to measure the concentration of the carbon dioxide in ambient air through the 2 υ₁ + 2υ₂ + υ₃ absorption lines around 1570 nm is reported. The carbon dioxide concentrations are derived from the relationship between the normalized second-harmonic signal peak heights of the measurement and reference signals. The validation of the system is conducted by a set of experiments with controlled carbon dioxide and nitrogen mixtures. The correlation and standard deviation between the measured and actual carbon dioxide concentrations are 0.9973 and 4.03%, respectively, over the tested range. A detection limit of 340 ppm m was achieved using 30 successive measurements during 30 min. All these results demonstrated potential utility of the system for carbon dioxide sensing.     

Optical Emission Spectroscopy of Carbon Clusters Produced in a Hollow Cathode Sputter Source

A hollow cathode sputter source is developed to trace the production of carbon clusters and study the influence of discharge current and argon gas pressure on cluster production using an optical emission spectroscopic technique. Optical emission spectra from the hollow cathode source reveal the production of the C₂ Swan band. The sputter source is optimized for the maximum carbon cluster yield. The vibrational temperature analysis of the C₂ cluster is carried out using the Boltzmann plot method. The dependence of vibrational temperature on argon gas pressure is discussed and the dominant method for C-C association in the glow discharge is suggested.     

Corona discharge in electrospraying

The paper presents investigations of current–voltage and light emission characteristics of electrospraying of various liquids in atmospheric air. The spectroscopic measurements have shown that the onset of corona discharge coincides with the onset of electrospraying, with the voltage increasing. The emission intensity in selected spectral lines during electrospraying depends on spraying mode, discharge power and a kind of liquid. In the specific experimental conditions in air, mainly the N₂ second positive system, which is visible as violet faint light, has been recorded. The emission intensity of other gaseous species, which could be product of electrosprayed molecules decomposition or dissociation, was at very low level for the voltages applied, i.e., for glow or onset streamer discharges. From the measured light emission spectra of discharges from capillary nozzle and liquid jet, the dependence of the amplitude of selected spectral lines on capillary-nozzle voltage has been determined and it was found that this relation can be approximated by a third-degree polynomial function. This approximation has been supported by theoretical considerations. The presented results support the hypothesis that faint electrical discharges (glow, onset streamers) usually occur during and are inherent to electrospraying.     

Study of phase coexistence in YVO3 and LaVO3

The coexistence at low temperature in YVO₃ and LaVO₃ of two competing phases with defined orbital and spin orientations is studied by Raman spectroscopy. The temperature evolution of the phonons indicates that phase coexistence, due to strain in YVO₃ and fluctuations in LaVO₃, is not restricted to small R ionic radius in RVO₃ compounds. Also, a typical temperature at 50 K is inferred from the temperature dependence of the intensities in LaVO₃. Copyright © 2015 John Wiley & Sons, Ltd.