Near field acoustic solution of a rotating point source in frequency domain

I.IntroductionAerodyntalcnoiseofturbomaChinrynotoalythectstheenvironmentbutalsosometimesresultsinstructuredamage.Aeroacoustics,asaintewhsciPlineofacousticsandaerodynamics,isattractingmorandmoreatteDtionandresearch.TherearetwoimportalltcontentsonthenoiseproducingmechAnsmsinaeroacousticproblem.OneisaboutthesourcesofnoiseinturbomachinryGenetallytherearethreetyPesofsources:thickness,forceandturbulencestress,correspondingrespectivelyTomonopole,dipoleandquadruplesourcesThelatertwokindsofsourcesh…     

CO2 line intensity FTS measurements with 1% assumed accuracy in the 1.5-1.6 μm spectral range

Using Fourier-transform spectra and a multispectrum fitting procedure, 124 absolute line intensities of ¹²C¹⁶O₂ are obtained for the cold band 30011-00001 and the hot band 01131-01101 between 6460 and 6950 cm⁻¹. Vibrational transition dipole moments squared and Herman-Wallis coefficients are reported for each band. Cross comparisons made with previous experimental results and with data available in the HITRAN and Carbon Dioxide Spectroscopic Databank (CDSD), bring some confidence on the good level of accuracy of the present results. Motivated by the demanding needs of some atmospheric experiments dedicated to the survey of the carbon cycle, an additional evaluation of potential absolute line intensity measurement limit is also performed on recently published carbon dioxide absolute line intensity independent measurements. These are obtained in two different laboratories on the bands 30013-00001 and 30012-00001 both located in the 1.6 μm spectral window. It is shown that Fourier-transform experimental CO₂ line intensity determination is approaching the challenging required figure of about 0.3% accuracy needed for the survey of the atmospheric carbon cycle.     

The absorption spectrum of phosphine (PH3) between 2.8 and 3.7 μm: Line positions, intensities, and assignments

Over 8000 line positions and intensities of phosphine (PH₃) at 3 μm have been measured at 0.0115 cm⁻¹ resolution with the McMath-Pierce Fourier Transform spectrometer at Kitt Peak. The observed line intensities ranged from 4.13 × 10⁻⁶ to 4.69 × 10⁻² cm⁻² atm⁻¹ at 296 K, for line positions between 2724.477 and 3601.652 cm⁻¹. This region spans eight interacting vibrational states: 3ν₂ (2940.8 cm⁻¹), 2ν₂ + ν₄ (3085.6 cm⁻¹), ν₂ + 2ν₄ (3214.9 cm⁻¹), ν₁ + ν₂ (3307.6 cm⁻¹), ν₂ + ν₃ (3310.5 cm⁻¹), 3ν₄ (∼3345 cm⁻¹), ν₁ + ν₄ (3426.9 cm⁻¹), and ν₃ + ν₄ (3432.9 cm⁻¹). Assignments have been determined for all the bands except 3ν₄ (a weak band in a highly congested area) for a total of 4232 transitions. The total integrated intensity for this region is 5.70 cm⁻² atm⁻¹ near 296 K, and assigned lines account for 79% of the observed absorption. The two strongest bands in the region are ν₁ + ν₄ and ν₃ + ν₄ with band strengths at 296 K of 1.61 and 2.01 cm⁻² atm⁻¹, respectively. An empirical database of PH₃ line parameters (positions, intensities, and assignments) is now available. Lower state energies (corresponding to assignments from this study) and line widths from the literature are included; default values are used for unassigned features.     

Investigation on NIR, coating mechanism of PS-b-PAA coated calcium carbonate particulate

Particulate calcium carbonate is treated by polystyrene (PS)/polyacrylic acid (PAA) block copolymer with varied amount. Coating efficiency is obtained by measuring the dissolve curve. The results of near-infrared (NIR) analysis reveal the thickness and structural information of the surface polymer layer. The alignment of PS-b-PAA chain on and the interaction of carboxyl with the calcite surface are deduced on the basis of X-ray photoelectron spectroscopy (XPS) results.     

A non-stationary periodic review production–inventory model with uncertain production capacity and uncertain demand

In this paper we consider a nonstationary periodic review dynamic production–inventory model with uncertain production capacity and uncertain demand. The maximum production capacity varies stochastically. It is known that order up-to (or base-stock, critical number) policies are optimal for both finite horizon problems and infinite horizon problems. We obtain upper and lower bounds of the optimal order up-to levels, and show that for an infinite horizon problem the upper and the lower bounds of the optimal order up-to levels for the finite horizon counterparts converge as the planning horizons considered get longer. Furthermore, under mild conditions the differences between the upper and the lower bounds converge exponentially to zero.     

Chemistry of chloroethylenes on Cu(100): bonding and reactions

The bonding and reactions of chloroethylenes (vinyl chloride, trans- and cis-dichloroethylene, trichloroethylene) on a Cu(100) surface have been investigated by temperature-programmed desorption and reaction, near-edge X-ray absorption fine structure (NEXAFS) studies and measurements of changes of the surface work function. The monolayer molecules adsorb molecularly intact at 95 K via π coordination. The molecules orient with their molecular planes parallel to the surface with little increase (<0.02 Å) in the C---C bond distance compared with the gas phase values. The degree of thermal dissociation increases with the extent of halogenation, and no chlorine is present in the hydrocarbon reaction products liberated from the surface. Both cis- and trans-1.2-chloroethylene produce acetylene and a small amount of benzene, while dissociation of trichloroethylene generates acetylene and deposits a carbon residue on the surface. Vinyl chloride desorbs from Cu(100) without reaction.     

Adsorption and reaction of formaldehyde on thin-film cerium oxide

Formaldehyde adsorption and reaction have been studied on cerium oxide thin films that were vapor deposited on Ru(0 0 0 1). The formaldehyde behavior was examined as a function of temperature, exposure and Ce oxidation state. Formaldehyde chemisorbs on fully oxidized CeO₂ as dioxymethylene, CH₂O₂. The dioxymethylene decomposes and desorbs as formaldehyde between 200 K and 400 K. No other products are formed. On reduced ceria, formaldehyde also adsorbs as dioxymethylene. In addition to the formaldehyde desorption between 200 K and 400 K, a more strongly bound form of dioxymethylene is formed that produces formaldehyde at 440 K. Above 400 K, some of the dioxymethylene reacts to form formate and methoxy on the surface. These species decompose to produce H₂, CO and CH₂O above 500 K.     

A facile organolithium route to ferrocene-based triarylmethyl dyes with substantial near IR and NLO properties

A series of triarylmethanol derivatives containing combinations of phenyl, 1-naphthyl, 4-dimethylamino-4′-stilbenyl, ferrocenyl or 4-[2-ferrocenylethenyl]phenyl groups have been prepared by reaction of 4-[4-Me₂NC₆H₄CC]C₆H₄Li or 4-[FcCC]C₆H₄Li (Fc = ferrocenyl) with ferrocenecarboxaldehyde, ferrocenyl phenyl ketone, methyl ferrocenecarboxylate, 1-naphthyl phenyl ketone, ethyl benzoate or diethyl carbonate. The carbinols readily form the corresponding intensely coloured carbenium ions in acid solution which have significant electronic absorption in the near infrared. Initial studies indicate that they also possess substantial first hyperpolarisabilities.     

低功率近红外光的偏振方向对光致折射率变化影响的实验研究

研究了利用低功率近红外光辐照In:Fe:LiNbO3晶体时写入光束的偏振方向对光致折射率变化(Δn)的影响.分别采用正常偏振(o光)和非常偏振(e光)的近红外细激光束,在In:Fe:LiNbO3晶体中进行了光折变实验.研究表明,两种偏振方向引起晶体的Δn实测曲线相似,但变化规律恰好相反,o光引起的折射率变化量约是e光的3倍左右.近红外光写入下两种偏振光束引起晶体的Δn分布规律都不同于可见光,尤其是e光辐照区域中心晶体的折射率升高.因此,通过选择不同偏振方向的近红外光可以在光折变晶体中制作不同折射率分布的非线性光学器件.     

周期量级激光脉冲在不同密度的原子介质中传播行为的比较(英文)

利用不含慢变包络近似和旋波近似的全波Maxwell-Bloch方程组的数值解,研究了周期量级超短激光脉冲在Ladder型三能级原子介质中的传播行为并与在相应的稀疏介质中的情况进行了比较.我们发现,在传播过程中,超短脉冲在稠密介质中的时间演化规律与在稀疏介质中明显不同,而且这种差别将随初始脉冲面积的增大而加大.当初始脉冲面积较小时,在传播过程中,脉冲形状在稀疏介质中只有小的改变而在稠密介质中却有显著的变化.当初始脉冲面积足够大时,在稠密介质中在不同的传播距离处脉冲分裂为不同数量和形状的亚脉冲;在稀疏介质中脉冲形状在传播过程中仍然只有小的改变。产生以上差别的原因在于稠密原子介质中近偶极-偶极(NDD)相互作用导致的局域场修正(LFC)及比稀疏原子介质更强的极化电场的影响.其中,更强的极化电场的影响起着主要的作用,但局域场修正的作用也不能忽略,而极化电场的增强是由于原子密度的增加.