Reusable ethanol sensor based on a NAD-dependent dehydrogenase without coenzyme addition

An amperometric sensor for the detection of ethanol has been designed. The sensing layer consists of alcohol dehydrogenase (ADH), NADH oxidase and NAD⁺-dextran, entrapped together in a matrix of poly(vinyl alcohol) bearing styrylpyridinium groups (PVA-SbQ). Measurements have been carried out at a low oxidizing potential (equivalent to 250 mV vs. SCE) to detect hexacyanoferrate(II), thus avoiding interferences due to presence of oxidizable compounds in real samples. The influence of the amount of polymer, enzymes and coenzyme in the sensing layer on the sensor sensitivity, linear range and operational stability has been studied. The sensitivity was close to 2 mA 1 mol⁻¹, with a linear range 3 × 10⁻⁷ −2 × 10⁻⁴M and a response time <2 min. Good operational stability was observed, allowing more than 40 reproducible assays without NAD⁺ addition. Alcoholic beverages were analysed with the use of sensor and the results showed good correlation with those obtained using a standard spectrophotometric procedure.     

ELECTROSPRAYING/ELECTROSPINNING OF POLY(γ-STEARYL-L-GLUTAMATE): FORMATION OF SURFACES WITH SUPERHYDROPHOBICITY

  Electrospraying/electrospinning of poly(γ-stearyl-L-glutamate) (PSLG) was investigated on a series solutions with different concentrations in chloroform. Field emission scanning electron microscopy (FESEM) and attenuated total reflectance Fourier transform infrared spectroscopy (FT-IR/ATR) were used to characterize the morphology and structure of the electrosprayed/electrospun polypeptide mats. It was found that electrospraying of PSLG with concentrations lower than 16 wt% afforded beads, while microfibers could be electrospun at the concentration of 22 wt%. The hydrophobicity of the electrosprayed/electrospun PSLG mats was investigated with static water contact angle (WCA) and tilt angle measurements. It was demonstrated that the superhydrophobic surfaces of PSLG with WCAs and tilt angles in the ranges of 150°-170° and 16.5°-4.2°, respectively, were obtained through electrospraying/electrospinning process.     

Interactions between temperature-sensitive hydrogel microspheres and granulocytes

Poly(N-isopropylacrylamide) (PNIPAM) has a low critical solution temperature (LCST) at 32°C in water and the hydrophilicity changes through the LCST. The microspheres whose surface was composed of PNIPAM exhibited phase transition behavior around 32°C. Therefore, the interactions between PNIPAM micropheres and granulocytes depended on the temperature. That is, the oxygen consumption and active oxygen production by cells in contact with PNIPAM-containing microspheres and adhesion of the microspheres to the cell surface were more enhanced above the LCST of PNIPAM than below it, whereas no significant temperature dependence of cell–microspheres interaction was observed in nonthermosensitive microsphere systems. It was suggested that the function of cells could be controlled with temperature using the temperature-sensitive microspheres.     

Pt羰基簇合物在NaY内的合成机理

利用IR，EXAFS, ~(13)CO同位素交换反应及与NO作用等手段研究了Pt羰基簇合物[Pt_3(CO)_6]~(2-)_n(n＝3,4)在NaY分子筛超笼内的合成机理．在氧化样品Pt~(2+)/NaY上300－373 K的还愿羰基化过程中，首先Pt~(2+)与CO反应生成PtO(CO)物种(波数σ_(CO)＝2110 cm~(-1))，然后聚集成“Pt_3(CO)_6”(σ_(CO)＝2112，1896和1841 cm~(-1))，最后生成深绿色的Pt羰基簇合物Pt_(12)(CO)_(24)]~(2-)/NaY(σ_(CO)＝2080，1824 cm~(-1))．“Pt_3(CO)_6”的羰基在室温下能迅速地与~(13)CO发生交换，而[Pt_3(CO)_6]~(2-)_n(n＝3,4)的羰基与~(13)CO的同位素交换即使在343 K也进行得很慢，室温下，NO能逐步破坏Pt羰基簇合物的层间和层内Pt－Pt键，得到中间物种“Pt_3(CO)_6”和PtO(CO)，同时在气相产生CO_2和N_2O．而由上述两中间物种出发，300－353 K温度下，在CO气氛中的还原羰基化又能可逆地得到原羰基簇合物．     

酚蓝系列分子非线性光学性质的INDO/CI研究

在AM1和INDA/CI方法的基础上,按完全态求和公式自编了计算二阶非线性光学系数β~ijh的程序,并对酚蓝系列分子,考察了苯环取代基变化及不同原子闭环对二阶光学非线性的影响.苯环上引入推电子基团对增大β有利,引入吸电子基团对增大β不利;闭环形成三环体系对增大β有利.对上述结果所反映的规律性在微观上进行了解释.     

Electrochemical synthesis of π-indenyl-π-(3)-1,2-dicarbollyliron(III)

Co-electrolysis of potassium 1,2-dicarbadodecahydroundecaborate and indene in 0.1N sodium bromide solution in dimethylsulfoxide using iron electrodes afforded -indenyl--(3)-1,2-dicarbollyliron(III).Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 764–765, April, 1993.     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Elektrophile Substitution und nucleophile Addition an 3,4-Dihydro-5(1H)-pyrromethenonen

3,4-Dihydro-5(1H)-pyrromethenones are easier attacked at themeso-position by electrophiles than 5(1H)-pyrromethenones. This is demonstrated both by aMannich-type-substitution or deuterium-exchange-experiments and by the addition of O-, S-, and N-Nucleophiles to the exocyclic double bond of the model-dihydropyrromethenone (Z)-1 under very mild reaction conditions. Applying these results to the chemistry of 2,3-dihydro-bilatrienes-abc, their chemical characteristics—especially their tautomeric behavior and their dominant C-5-selectivity towards electrophiles—become better understandable.

     

Theoretical studies of molecular conformation. Derivation of an additive procedure for the computation of intramolecular interaction energies. Comparison withab initio SCF computations

An additive procedure (SIBFA) is developed for the rapid computation of conformational energy variations in very large molecules. The macromolecule is built out of constitutive molecular fragments and the intramolecular energy is computed as a sum of interaction energies between the fragments. The electrostatic and the polarization components are calculated using multicenter multipole expansions of theab initio SCF electron density of the fragments. The repulsion component is obtained as a sum of bond and lone pair interactions.Tests of the procedure on a series of model compounds containing ether oxygens and pyridine-like nitrogens are reported and compared with the results of correspondingab initio SCF calculations. The resulting methodology is compatible with the simultaneous computation of intermolecular interactions.