Synthesis of the fungal natural product (−)-xylariamide A

The first synthesis of the fungal natural product (−)-xylariamide A 1 is reported. N,O-Bis(trimethylsilyl)acetamide induced coupling of d-tyrosine with (E)-but-2-enedioic acid 2,5-dioxo-pyrrolidin-1-yl ester methyl ester 5 produced the dechloro natural product 6, which was subsequently monochlorinated using oxone and KCl to yield synthetic 1. (−)-Xylariamide A 1, (+)-xylariamide A 2 and (−)-dechloroxylariamide A 6 displayed no cytotoxic or antimicrobial activity.     

A theoretical investigation into the conformational changes of dibenzo-p-dioxin, thianthrene, and selenanthrene

Theoretical ab initio calculations using the HF and B3LYP methods have been carried out to investigate the conformational differences of three cyclic rings, dibenzo-p-dioxin (DPD), thianthrene (THT), and selenanthrene (SET). The physical origin for the conformational preference of each molecule has been studied using the natural bond orbital (NBO) analysis. The NBO results indicate that DPD exists in a planar form due to strong electron delocalization caused by the specific orbital interaction, around the X atom. On the other hand, THT and SET exist as puckered forms with high inversion barriers due to less effective electron delocalization. The NBO analysis also shows that the conformational stabilization in DPD is caused by a more effective overlap of the orbitals, compared with the overlap of the orbitals in THT.     

新显色剂噻二唑偶氮二甲氨基苯甲酸与铜(Ⅱ)显色反应的研究和应用

本文研究了噻二唑偶氮二甲氨基苯甲酸与Cu(Ⅱ)显色反应条件,确定在pH3.0～4.5范围形成蓝紫色络合物,组成比为1:1,摩尔吸光系数ε=4.55×10~4L·mol~(-1)·cm~(-1),1gβ=7.32。应用拟定的方法测定天然水中微量铜,获得满意的结果。     

Synthesis of N,N-diethyldithiocarbamate functionalized 1,4-polyisoprene, from natural rubber and synthetic 1,4-polyisoprene

N,N-Diethyldithiocarbamate functionnalized 1,4-polyisoprenes were prepared from 1,4-polyisoprenes (natural or synthetic). The syntheses were performed by nucleophilic addition of N,N-diethyldithiocarbamate salts upon oxirane rings of epoxidized units according to a SN2 mechanism with ring opening. Studies on model molecules of epoxidized 1,4-polyisoprene units (1,2-epoxy-1-methylcyclohexane and 4,5-epoxy-4-methyloctane) were previously achieved to develop the procedure. The best yields were obtained at low temperature in polar medium, and more especially in water with sodium N,N-diethyldithiocarbamate (DEDT-Na) as reagent. A diastereospecific addition was noted when reaction was performed in water with DEDT-Na. Afterwards, the developed procedure was successfully generalized to epoxidized synthetic polyisoprenes and epoxidized natural rubber (in THF, then in latex medium). Excellent results were obtained in latex medium with epoxidized natural rubber (ENR) latices. As with the models, a diastereospecific addition of sodium N,N-diethyldithiocarbamate trihydrate onto epoxidized 1,4-polyisoprene units of ENR was observed at the condition to bring the latex medium to pH 8 before introduction of DEDT-Na. Influence of temperature, drc, and DEDT-Na concentration were successively examined to determine the best conditions of the addition on ENR latices.     

Studies on accelerated sulphur vulcanization of natural rubber using 1-phenyl-2, 4-dithiobiuret/tertiary butyl benzothiazole sulphenamide

The use of binary accelerators has gained tremendous importance since it increases the production rate of the article made of that elastomer. The authors have analyzed the performance of a novel binary accelerator system in the sulphur vulcanization of natural rubber (NR). The vulcanizates resulting from the binary accelerated process obtained good mechanical properties, ageing and swelling resistance. Network characterization of the mixes was done using swelling measurements, stress-strain analysis etc. The chain entanglement density was measured using dynamic mechanical analysis. However the performance is found to be dependent on the relative proportion of mono, di and polysulphidic linkages in the material. The result of the study points out that the proposed system can be active in NR regardless of the vulcanization recipe and temperature. The performance of the new binary system in filled vulcanizates is also studied. Based on the processing, mechanical and chemical characterization an optimum concentration is suggested for the new system.     

Determination of butyltins in environmental samples using sodium tetraethylborate derivatisation: characterisation and minimisation of interferences

Interferences affecting the determination of butyltin species by sodium tetraethylborate (STEB) derivatisation followed by purge-trap preconcentration were systematically studied using synthetic solutions, natural water samples and sediment extracts. Substances that did not cause interferences included most common cations (apart from those metal ions listed below), anions, metalloids and polar organic compounds. Natural organic matter (NOM) specifically interfered with tributyltin (TBT) due to a mechanism involving partitioning of the butyltin to the hydrophobic portions of the NOM. The metal ions Ag(I) (≥2 μM), Cd(II) (≥2 μM), Cu(II) (≥0.5 μM) interfered predominantly with the determination of monobutyltin (MBT) due to catalytic degradation of the STEB reagent. Pb(II) (≥14 μM) interfered with butyltin determination by an unknown mechanism. Other interferences to the purge-trap method were shown to occur in the presence of chelating agents (e.g. EDTA) or hydrophobic liquids such as diesel fuel. A mixture comprising methanol (MeOH), EDTA and Mn(II) was used to partially mask the effect of interfering NOM and metals. Spike recoveries (mean±S.D. of n=7 different samples) of MBT, dibutyltin (DBT) and TBT in contaminated natural water samples were improved from 70±36,90±11 and 91±24 to 102±10,98±3 and 98±4%, respectively. Spike recoveries (mean±S.D. of n=5 different samples) of MBT, DBT and TBT in aliquots of sediment extracts were improved from 86±17,79±18 and 59±32 to 97±6.2,103±3.6 and 103±5.0%, respectively. The ability to analyse larger aliquots of sediment extracts in the presence of the masking mixture improved the detection limit four-fold if MBT and DBT determination was required and 10-fold if only TBT determination was required.     

Identification of anthraquinone coloring matters in natural red dyestuffs by high performance liquid chromatography with ultraviolet and electrospray mass spectrometric detection

Reversed phase liquid chromatography with diode array detection (DAD) and electrospray mass spectrometric (ESI MSD) methods were developed for the identification of anthraquinone color components of cochineal, lac dye, and madder – red natural dyestuffs. Electrospray mass spectrometry was found to be more suitable than diode array detection for such analysis because of its higher sensitivity (detection limits in the range 30–90 ng mL^–1) and selectivity. The developed method permitted unequivocal identification of carminic acid and laccaic acid A as coloring matters in examined preparations of cochineal and lac dye, respectively. In madder more chemical color species were found: alizarin, purpurin, lucidin, ruberythric acid, and also aluminum and calcium alizarin lake. Among the methods recommended so far, the present one allows fast, direct, and unequivocal identification of components of very complicated natural products used in art.     

Novel biotransformation of pentacyclic triterpenoid acids by Nocardia sp. NRRL 5646

Six pentacyclic triterpene acids, ursolic acid, oleanolic acid, betulinic acid, 23-hydroxybetulinic acid, glycyrrhetinic acid, and senegenin, were metabolized by the microbe Nocardia sp. NRRL 5646 to selectively furnish their corresponding 28-methyl esters. Notably, ursolic acid (1) was converted to oleanolic acid methyl ester (4) via two intermediates, oleanolic acid (2), and ursolic acid methyl ester (3), which are formed by participation of ‘retro-biosynthetic’ methyl migration from C-19 to C-20. Senegenin (11) was selectively converted to a nortriterpene methyl ester, senegenic acid methyl ester (12), via an unprecedented C-C bond cleavage. The stereochemical assignments of compounds 11 and 12 were made unambiguously for the first time using 2D NMR spectroscopy.     

Determination of the Dissociation Constants of Urocanic Acid Isomers in Aqueous Solutions

Summary. (E)- and (Z)-Urocanic acids are endogenous chemicals in the normal mammalian skin. The first and the second thermodynamic dissociation constants (pK _a1 and pK _a2) of urocanic acid isomers were determined using UV spectrophotometry in aqueous solutions. The values with standard deviation (pK _a1 = 3.43 ± 0.12 and pK _a2 = 5.80 ± 0.04) and (pK _a1 = 2.7 ± 0.3 and pK _a2 = 6.65 ± 0.04) were obtained to (E)- and (Z)-urocanic acids, respectively. The second dissociations were studied also by potentiometric titration in aqueous sodium chloride solutions up to the isotonic salt concentration (0.154 mol dm⁻³), and the second thermodynamic dissociation constants as well as activity parameters for both isomers were determined at temperature 25°C and for (E)-urocanic acid also at 37°C. The obtained pK _a2 values were close to those found by UV spectrophotometry. The equations for the calculation of the second stoichiometric dissociation constants of urocanic acid isomers on molality and molarity scale in aqueous sodium chloride solutions were derived. The obtained pK _a1 and pK _a2 values for (Z)-urocanic acid appear to be essentially lower than some previously reported values in literature. An erratum to this article is available at .     

2-F-环氧丁烷与几种生物小分子间的赝氢键结构

采用密度泛函B3LYP(Becke,three-parameter,Lee-Yang-PaH)/6-311++G**和HF(Hartree Fock)/6-311++G**方法,从理论上探讨了2-F-环氧丁烷分别与几种常见而重要的生物小分子咪唑(Iminazole)、噻唑(Thiazole)和恶唑(Oxazo1e)等分子间的弱相互作用,发现分子间同时存在N…H常规氢键和C-F…H-C赝氢键结构.弱相互作用能计算表明3个复合物的相对稳定性相当.计算结果表明,在C-F…H-C赝氢键结构中,与电子的直接供体F密切相关的共价键C-F键长增大,伸缩振动的频率红移,而作为电子受体的H-C基团,其C-H键伸缩振动光谱蓝移;另外,电子密度拓扑性质表明C-F…H-C赝氢键的共价性及离子性均与常规氢键相当.