A portable sensor for the rapid detection of naphthalene acetic acid in fruits and vegetables using stabilized in air lipid films with incorporated auxin-binding protein 1 receptor

The present technique describes the development of a simple sensitive spot optical test and the construction of a portable biosensor for the rapid one-shot detection of naphthalene acetic acid (NAA) using stabilized lipid films supported on a methacrylate polymer on a glass fiber filter with incorporated auxin-binding protein 1 receptor. The lipid films without the receptor provided fluorescence under a UV lamp. The use of the receptor in these films quenched this fluorescence and the colour became similar to that of the filters without the lipid films. A drop of aqueous solution of naphthalene acetic acid provided a “switching on” of the fluorescence which allows the rapid detection of this stimulant at the levels of 10⁻⁹ M concentrations. It was also possible to have quantitative data based on a calibration graph. The effect of potent interferences included a wide range of compounds. The results showed no interferences from these compounds in concentration levels usually found in real samples. The method was applied for the determination of NAA in fruits and vegetables and the reproducibility of the method was checked in about 50 samples. A quantitative method for the detection of NAA in crops that can be complimentary to HPLC methods is provided in the present paper. These lipid films can be used as portable biosensors for the rapid one-shot detection of NAA in fruits and vegetables by non-skilled personnel in the field.     

Liquid phase hydrogenation of naphthalene in the presence of CO over supported Ni catalyst

The liquid phase hydrogenation of naphthalene was performed in the presence of CO over a commercial Ni/SiO₂-Al₂O₃ catalyst. Naphthalene was hydrogenated even in the presence of CO at elevated temperatures, accompanying the hydrogenation of CO. Two activation energy values were obtained for the naphthalene hydrogenation depending on the reaction temperature. FT-IR measurement of the adsorbed CO was also carried out. Hydrogenation of the adsorbed CO created sites active for naphthalene hydrogenation.     

Cyclocondensation of N-prop-2-ynyl-and N-pentadiynyl-<Emphasis Type="Italic">o</Emphasis>-phenylenediamines with phenyl isothiocyanate

Cyclocondensation of N-prop-2-ynyl-o-phenylenediamine with phenyl isothiocyanate leads to the formation of 1-(3-arylprop-2-ynyl)-2,3-dihydro-1H-benzimidazole-2-thiones. In the reactions of diacetylene derivatives — N-penta-2,4-diynyl-o-phenylenediamine — with phenyl isothiocyanate the formation of two heterocyclic nuclei occurs simultaneously to form [1,3]thiazolidino[3,2-a]benzimidazoles. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, 627–631, April, 2007.     

1-羟基-5-十二烷氧基-萘LB膜结构和取向的光谱研究

用红外透射,反射光谱及紫外可见吸收光谱方法研究了１－羟基－５－十二烷基－萘ＬＢ膜及溶液状态下的结构,分子取向。研究结果表明分子在溶液中主要是以单体形式存在;在ＬＢ膜中是以聚集体形式存在。     

Multiple Coordination of Metal Atoms to Arenes: The Coordination of Six Ruthenium Atoms to Naphthalene-1,8-diyl in [Ru6(μ6-C10H6)(μ3-PPh)(CO)14]

Six ruthenium atoms are coordinated to the naphthalene-1,8-diyl ligand in the cluster [Ru₆(CO)₁₄(C₁₀H₆)(PPh)] through two Ru−C σ bonds, two η², and two η³ interactions (section of structure depicted on the right). The complex could, therefore, serve as a model for the chemisorption of naphthalene on a step-site on a (111) metal surface.     

Polyaniline doped with different sulfonic acids by in situ doping polymerization

Doped polyaniline (PANI) was synthesized by an “in situ doping polymerization” method in the presence of different sulfonic acids, such as methanesulfonic acid (MSA), p‐methylbenzene sulfonic acid (MBSA), β‐naphthalenesulfonic acid (β‐NSA), α‐naphthalenesulfonic acid (α‐NSA), 1,5‐naphthalenedisulfonic acid (1,5‐NSA), and 2,4‐dinitronaphol‐7‐sulfonate acid (NONSA). Morphology, solubility in m‐cresol, and electrical properties of the doped PANI were measured with the variation of the molecular structure of the selected sulfonic acids. Granular morphology was obtained when the sulfonic acids without a naphthalene ring, such as MSA and MBSA, were used. Regular tubular morphology was obtained only when β‐NSA was used. The tubular morphology can be modified by changing the substitutes, the number, and location of sulfo‐group(SOH) on the naphthalene ring. These results indicated that naphthalene ring in the selected sulfonic acids plays an important role in forming the tubular morphology of the doped PANI by the “in situ doping polymerization” method. All resulting PANI salts were soluble in m‐cresol, with the solubility depending on the molecular structure of the selected dopants. Room‐temperature conductivity for the doped PANI ranges from 10⁻¹ to 10⁰S/cm. Temperature dependence of conductivity shows a semiconductor behavior, and it can be expressed by one dimenson Variable Range Hopping (VRH) model. 1 © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1277–1284, 1999     

Hydrogenation of naphthalene on noble-metal-containing mesoporous MCM-41 aluminosilicates

Aromatic saturation of oil fractions is a key process in the refining industry due to increasing demand for cleanest distillates with superior performances. In this study, the behavior of different catalysts containing 1 wt.% of noble-metal inside a mesoporous MCM-41 (Si:Al=20) framework was investigated in the hydrogenation of naphthalene, as preliminary step to investigate bimetallic catalysts. While at atmospheric pressure only Rh and Pd showed a low hydrogenation activity, in the tests performed at 6.0 MPa the catalytic activity grew, exhibiting the following order: Pt>RhPd>>>Ru≈Ir. However, all the catalysts required a large H₂ excess, to avoid a decrease in hydrogenation and ring-opening activity, and gave rise to the best performance for a contact time of 6.8 s, favouring at lower values the partial hydrogenation to tetralin and at higher values cracking reactions. Finally, all the catalysts showed low thio-tolerance, with significant deactivation already feeding 100 ppm wt. of dibenzothiophene (DBT), with a partial reversibility only for the Pt-containing catalyst (CAT 3).     

Synthesis of Poly（aryl ether ketone） Copolymers Containing Adamantyl-substituted Naphthalene Rings

1 Introduction High performance polymers have received con-siderable attention over the past decade owing to their increased demands as replacements for metals or     

沸石上萘的催化破环反应

沸石上萘的催化破环反应朱建华刘琳胡玉海曹洁明须沁华（南京大学化学化工学院化学系，南京２１００９３）关键词沸石催化剂，ＨＭＳ中孔分子筛，萘，多环芳烃，催化裂解，环境保护分类号Ｏ６４３／Ｘ５当前，治理大工业生产带来的环境污染已经成为全球关注的课题，也是...     

High-yield synthesis of a novel water-soluble macrocycle for selective recognition of naphthalene

A novel good water-soluble macrocycle containing two pyridinium moieties was synthesized in high yield.It could form 1:1 complexes with neutral guests containing naphthalene or phenyl units in water.The water-soluble macrocycle can selectively encapsulate naphthalene to form a 1:1 complex over a variety of polycyclic aromatic hydrocarbons.