甲醇在纳米TiO2作用下进行光催化氧化反应的机理研究

以纳米TiO2 为催化剂 ,以主波长为 36 4nm的汞灯为光源 ,用气相色谱法分别考察了 0 .1mol/L的甲醇、甲醛和甲酸水溶液进行光催化氧化反应的动力学规律 .Langmuir Hinshelwood方程进行核算结果证明 ,该组反应均为零级反应 .用TEM、XRD、SSA和XPS对催化剂进行表征 .根据XPS的检测结果提出了甲醇光催化氧化的反应机理 .TiO2 光激发活化时间约为 30～ 6 0min ,生成物及剩余反应物浓度随时间变化的曲线表明 ,该反应速率为HCH2 OH 相似文献   

如何撰写高水平的《大学化学》教学研究论文

论述了教学研究的重要性和复杂性。提出撰写教学研究论文应符合先进性、创新性、实证性、示范性和发展性等原则。介绍了教学研究涉及的主要领域,研究的主要内容和方法,对如何开展各领域教学研究并撰写高水平的教学研究论文进行了讨论并给出了示例。     

Crystal packing effects within [Mn3O] single-molecule magnets: Controlling intermolecular antiferromagnetic interactions

The reactions of 2-hydroxyphenylethanone oxime (Me-H₂salox) and (2-hydroxy-phenyl)-phenyl-methanone oxime (Ph-H₂salox) with Mn(ClO₄)₂·6H₂O in MeOH afford trinuclear manganese complexes of [Mn₃O(Me-salox)₃(MeOH)₃(ClO₄)]·MeOH (1·MeOH) and [Mn₃O(Ph-salox)₃(MeOH)₃(ClO₄)]·2MeOH (2·2MeOH), respectively. X-ray analysis shows that both complexes contain a manganese triangle core, [Mn^III₃O]⁷⁺. The structural distortion from the twisting of the oxime ligands dominates the ferromagnetic interactions within the three Mn ions in both compounds and results in an S = 6 ground state. The frequency dependence of out-of-phase signals in the alternating current (AC) magnetic susceptibility measurements and the temperature-dependent and sweep-rate-dependent hysteresis loops are indicative of single-molecule magnet behavior. Moreover, both complexes show step-wise magnetization, indicating the occurrence of quantum tunneling of magnetization (QTM). Interestingly, a tail to tail arrangement in the crystal packing of complex 1·MeOH results in strong intermolecular H-bonding interactions and leads to the exchange-bias effect from the antiferromagnetic interaction between the adjacent Mn₃ molecules. In contract, QTM steps of complex 2·2MeOH show an absence of the exchange-bias effect due to a weak intermolecular interaction from a head to tail arrangement.     

食品中铝检测方法研究进展

介绍了食品中铝的来源,并综述了近十年中食品中铝测定方法的研究进展,包括电感耦合等离子体原子发射光谱法、电感耦合等离子体质谱法、石墨炉原子吸收光谱法、电化学分析法以及分光光度法等方法(引用文献75篇)。     

Leveraging Expertise in Thermal Catalysis to Understand Plasma Catalysis

Best practices in testing heterogeneous catalysts are translated to plasma-catalytic experiments. Independent determination of plasma-catalytic and plasma-chemical contributions is essential. Non-porous catalyst particles are preferred because active sites inside sub-micron pores cannot contribute. Temperature variation is needed to determine kinetics, despite the complexity of thermal effects in plasma. Rigorous checks on catalyst deactivation and mass balance are needed. Plasma enhanced reversed reactions should be minimized by keeping conversion low and far from thermodynamic equilibrium, preventing underestimation of the rate of forward reaction. In contrast, plasma-catalytic studies often aim at conversions surpassing thermodynamic equilibrium, not obtaining any information on kinetics. Calculation of catalyst activity per active sites (turn-over-frequency) requires also appropriate characterization to determine the number of active sites. The relationship between kinetics and thermodynamics for plasma-catalysis is discussed using endothermic decomposition of CO₂ and exothermic synthesis of ammonia from N₂ and H₂ as examples. Assuming Langmuir–Hinshelwood and Eley-Rideal mechanisms, the effect of excitation of reactant molecules on activation barriers and surface coverages are discussed, influencing reaction rates. The consequences of reversed reactions are considered. Plasma-catalysis with catalysts applied for thermal catalysis at much higher temperature should be avoided, as adsorbed species are bonded too strongly resulting in low rates.     

Deconstructive Carboxylation of Activated Alkenes with Carbon Dioxide

Carboxylation with carbon dioxide (CO₂) represents one notable methodology to produce carboxylic acids. In contrast to carbon–heteroatom bonds, carbon–carbon bond cleavage for carboxylation with CO₂ is far more challenging due to their inherent and less favorable orbital directionality for interacting with transition metals. Here we report a photocatalytic protocol for the deconstructive carboxylation of alkenes with CO₂ to generate carboxylic acids in the absence of transition metals. It is emphasized that our protocol provides carboxylic acids with obviously unchanged carbon numbers when terminal alkenes were used. To show the power of this strategy, a variety of pharmaceutically relevant applications including the modular synthesis of propionate nonsteroidal anti-inflammatory drugs and the late-stage carboxylation of bioactive molecule derivatives are demonstrated.     

Nanoscale Local Contacts Enable Inverted Inorganic Perovskite Solar Cells with 20.8 % Efficiency

Inorganic perovskite solar cells (IPSCs) have gained significant attention due to their excellent thermal stability and suitable band gap (~1.7 eV) for tandem solar cell applications. However, the defect-induced non-radiative recombination losses, low charge extraction efficiency, energy level mismatches, and so on render the fabrication of high-efficiency inverted IPSCs remains challenging. Here, the use of 3-amino-5-bromopyridine-2-formamide (ABF) in methanol was dynamically spin-coated on the surface of CsPbI_2.85Br_0.15 film, which facilitates the limited etching of defect-rich subsurface layer, resulting in the formation of vertical PbI₂ nanosheet structures. This enabled localized contacts between the perovskite film and the electron transport layer, suppress the recombination of electron-hole and beneficial to electron extraction. Additionally, the C=O and C=N groups in ABF effectively passivated the undercoordinated Pb²⁺ at grain boundaries and on the surface of CsPbI_2.85Br_0.15 film. Eventually, we achieved a champion efficiency of 20.80 % (certified efficiency of 20.02 %) for inverted IPSCs with enhanced stability, which is the highest value ever reported to date. Furthermore, we successfully prepared p-i-n type monolithic inorganic perovskite/silicon tandem solar cells (IPSTSCs) with an efficiency of 26.26 %. This strategy provided both fast extraction and efficient passivation at the electron-selective interface.     

Synthetic Advantages of Defluorinative C−F Bond Functionalization

Much progress has been made in the development of methods to both create compounds that contain C−F bonds and to functionalize C−F bonds. As such, C−F bonds are becoming common and versatile synthetic functional handles. This review summarizes the advantages of defluorinative functionalization reactions for small molecule synthesis. The coverage is organized by the type of carbon framework the fluorine is attached to for mono- and polyfluorinated motifs. The main challenges, opportunities and advances of defluorinative functionalization are discussed for each class of organofluorine. Most of the text focuses on case studies that illustrate how defluorofunctionalization can improve routes to synthetic targets or how the properties of C−F bonds enable unique mechanisms and reactions. The broader goal is to showcase the opportunities for incorporating and exploiting C−F bonds in the design of synthetic routes, improvement of specific reactions and advent of new methods.     

甲基多烯醛共轭体系电子光谱及线性关系的MHMO法研究

甲基多烯醛共轭体系电子光谱及线性关系的ＭＨＭＯ法研究马生元（青海民族学院化学系西宁８１０００７）关键词甲基多烯醛，电子光谱，线性关系，ＭＨＭＯ法有机共轭同系物的电子光谱有广泛的线性关系［１－３］，这是分子周期性结构的必然结果。分子电子光谱则是分子中轨...     

Solid state NMR characterisation of crystalline Na2OZrO2SiO2 phases

The NMR interactions of crystalline phases in the system Na₂O-ZrO₂-SiO₂ have been studied by a combination of static and magic angle spinning NMR methods for the first time. A full multinuclear (¹⁷O, ²³Na, ²⁹Si and ⁹¹Zr) approach has been employed that allows the phases to be clearly identified. NMR interactions such as ²⁹Si isotropic chemical shift correlate with the known structural units present. For ²³Na the different sites can often be distinguished on the basis of differing quadrupolar interactions.