Nonlocal vibration of SWBNNT embedded in bundle of CNTs under a moving nanoparticle

In this study, an analytical method of the small scale parameter on the vibration of single-walled Boron Nitride nanotube (SWBNNT) under a moving nanoparticle is presented. SWBNNT is embedded in bundle of carbon nanotubes (CNTs) which is simulated as Pasternak foundation. Using Euler–Bernoulli beam (EBB) model, Hamilton's principle and nonlocal piezoelasticity theory, the higher order governing equation is derived. The effects of electric field, elastic medium, slenderness ratio and small scale parameter are investigated on the vibration behavior of SWBNNT under a moving nanoparticle. Results indicate the importance of using surrounding elastic medium in decrease of normalized dynamic deflection. Indeed, the normalized dynamic deflection decreases with the increase of the elastic medium stiffness values. The electric field has significant role on the nondimensional fundamental frequencies, as a smart controller. The results of this work is hoped to be of use in design and manufacturing of smart nano-electro-mechanical devices in advanced medical applications such as drug delivery systems with great applications in biomechanics.     

糠醇辅助的聚合凝胶法制备纳米Li4Ti5O12负极材料

以硝酸锂、钛酸正丁酯和糠醇为反应物,采用糠醇聚合凝胶法制备了纳米Li₄Ti₅O₁₂粉体．利用XRD、SEM和BET比表面测试对产物进行了表征,并研究了纳米Li₄Ti₅O₁₂粉体作为锂离子电池负极材料的电化学性能．在700℃或更高温度烧结时产物为纯相的尖晶石型．通过柠檬酸、聚乙烯吡咯烷酮、十六烷基三甲基溴化铵(CTAB)表面活性剂的加入能够减少产物颗粒的团聚程度,增大粉体的比表面积,提高其电化学性能．加入0.5 g CTAB、700℃烧结12 h的Li₄Ti₅O₁₂粉体展示出最高的比容量和最佳的循环性能,10 C下充电比容量高达156.7 mAh/g．     

Synthesis of TiO2 rutile nanoparticles by PLA in solution

This paper describes the synthesis of TiO₂ nanoparticles by laser ablation in solution synthesis (Lasis). The laser excimer beam passes through a focusing lens and it is sent to the reaction chamber. The frequency used during the synthesis was 20 Hz, intensity 26 kV The metal ablated by the laser beam undergoes an oxidation process resulting from the reaction with water. We obtain TiO₂ nanoparticles with average size of 6.5 nm, crystallized in the rutile structure. The crystallographic and morphological structure was studied by transmission electron microscopy.     

Study of magnetic and structural properties of ferrofluids based on cobalt-zinc ferrite nanoparticles

Ferrofluids are colloidal systems composed of a single domain of magnetic nanoparticles with a mean diameter around 30 nm, dispersed in a liquid carrier. Magnetic Co_(1−x)Zn_xFe₂O₄ (x=0.25, 0.50, 0.75) ferrite nanoparticles were prepared via co-precipitation method from aqueous salt solutions in an alkaline medium. The composition and structure of the samples were characterized through Energy Dispersive X-ray Spectroscopy and X-ray diffraction, respectively. Transmission Electron Microscopy (TEM) studies permitted determining nanoparticle size; grain size of nanoparticle conglomerates was established via Atomic Force Microscopy. The magnetic behavior of ferrofluids was characterized by Vibrating Sample Magnetometer (VSM); and finally, a magnetic force microscope was used to visualize the magnetic domains of Co_(1−x)Zn_xFe₂O₄ nanoparticles. X-ray diffraction patterns of Co_(1−x)Zn_xFe₂O₄ show the presence of the most intense peak corresponding to the (311) crystallographic orientation of the spinel phase of CoFe₂O₄. Fourier Transform Infrared Spectroscopy confirmed the presence of the bonds associated to the spinel structures; particularly for ferrites. The mean size of the crystallite of nanoparticles determined from the full-width at half maximum of the strongest reflection of the (311) peak by using the Scherrer approximation diminished from (9.5±0.3) nm to (5.4±0.2) nm when the Zn concentration increases from 0.21 to 0.75. The size of the Co-Zn ferrite nanoparticles obtained by TEM is in good agreement with the crystallite size calculated from X-ray diffraction patterns, using Scherer's formula. The magnetic properties investigated with the aid of a VSM at room temperature presented super-paramagnetic behavior, determined by the shape of the hysteresis loop. In this study, we established that the coercive field of Co_(1−x)Zn_xFe₂O₄ magnetic nanoparticles, the crystal and nanoparticle sizes determined by X-ray Diffraction and TEM, respectively, decrease with the increase of the Zn at%. Finally, our magnetic nanoparticles are not very hard magnetic materials given that the hysteresis loop is small and for this reason Co_(1−x)Zn_xFe₂O₄ nanoparticles are considered as soft magnetic material.     

Magnetic properties of nanosized γ-Fe2O3 and α-(Fe2/3Cr1/3)2O3, prepared by thermal decomposition of heterometallic single-molecular precursor

Thermal decomposition of the trinuclear complex [Fe₂CrO(CH₃COO)₆(H₂O)₃]NO₃ at 300, 400 and 500 °C gave γ-Fe₂O₃ nanoparticles along with amorphous chromium oxide, while decomposition of the same starting compound at 600 and 700 °C led to the formation of α-(Fe_2/3Cr_1/3)₂O₃ nanoparticles. Size of γ-Fe₂O₃ nanoparticles, determined by X-ray diffraction, was in the range from 9 to 11 nm and increased with formation temperature growth. Average size of α-(Fe_2/3Cr_1/3)₂O₃ nanoparticles was about 40 nm and almost did not depend on the temperature of its formation. γ-Fe₂O₃ nanoparticles possessed superparamagnetic behavior with blocking temperature 180-250 K, saturation magnetization 29-35 emu/g at 5 K, 44-49 emu/g at 300 K and coercivity 400-600 Oe at 5 K. α-(Fe_2/3Cr_1/3)₂O₃ nanoparticles were characterized by low magnetization values (2.7 emu/g at 70 kOe). Such magnetic properties can be caused by non-compensated spins and defects present on the surface of these nanoparticles. The increase of α-(Fe_2/3Cr_1/3)₂O₃ formation temperature led to decrease of magnetization (being compared for the same fields), which may be caused by decrease of the quantity of defects or non-compensated spins (due to decrease of particles' surface).     

Nano cellulose particles covered with block copolymer of cellulose and methyl methacrylate produced by solid mechano chemical polymerization

Nano cellulose particles covered with a block copolymer of microcrystalline cellulose and poly(methyl methacrylate) (MCC-block-PMMA) were produced by a solid mechano-chemical polymerization. The polymerization of methyl methacrylate was initiated by chain-end-type microcrystalline cellulose (MCC) radicals (i.e., MCC mechano radicals) on the surface of MCC that were induced by mechanical fracture of β-1,4 glycosidic linkages. The chemically modified cellulose particles with MCC-block-PMMA were fractionated by Soxhlet extraction with chloroform, and resulted in MCC-block-PMMA residue from residue on the filter and MCC-block-PMMA filtrate from filtrate solution. The surface of the MCC particles chemically modified with MCC-block-PMMA in MCC-block-PMMA residue was partially covered with PMMA chains of the MCC-block-PMMA. In contrast, the surfaces of the MCC nanoparticles chemically modified with MCC-block-PMMA in MCC-block-PMMA filtrate were fully covered with PMMA chains of the MCC-block-PMMA. A dispersion of the chemically fully modified MCC nanoparticles in chloroform was optically transparent. The average diameter of the chemically fully modified MCC nanoparticles in chloroform was estimated to be 52 nm. These were confirmed by electron spin resonance, Fourier transform infrared, and ¹H nuclear magnetic resonance spectroscopy, by gel permeation chromatography and dynamic light scattering.     

A collaboration into research on nanoparticles (ACORN)

This paper describes the operation and outcome of one of the United Kingdom's largest multi-partner research activities in nanoparticles.The research covers the discovery and development of organic and inorganic crystals/nanoparticles,nanoparticle properties towards specific product applications,The research also encompassed bespoke measurement technology for nanoparticles and structure interactions.Significant research outcomes are summarised.The paper illustrates the advantages from industrially motivated research and value of collective action between a broad group of researchers in a nation.     

Preparation of CuInS2 Thin Film Using Sulfides Nanoparticle Precursor Ink

A low cost spin coating route of fabricating CuInS₂ polycrystalline thin films by reactive sin-tering method was put forward. The ink for spin coating was optimized by pre-reducing the precursor powders in hydrogen, which turned the nanoparticle precursor powders from mixed sulfides into a mixture of CuInS₂ and Cu-In metal alloys. The results of scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and Raman spectra showed that this optimization could highly improve the performance of CuInS₂ polycrystalline thin films, including higher packing density, less impurity phases, and better quality. The en-ergy gap of optimized CuInS₂ thin film was determined to be about 1.45 eV by absorption spectroscopy measurement.     

微流控芯片中细胞动态胞吞二氧化硅纳米颗粒的研究

研究了用微流控芯片在体外模拟人体血液流动状态下细胞胞吞二氧化硅纳米粒子的方法和特性. 通过调节储液池的液面差, 使细胞从微通道入口流入并在通道内沉积贴壁生长. 将含有贴壁细胞的微流控芯片放入37 ℃/体积分数5%CO₂的培养箱中, 使细胞培养液连续流过贴壁细胞. 培养24 h后, 在流动的培养液中加入作为荧光标记物的500 nm 粒径的掺杂有异硫氰酸荧光素(FITC)的二氧化硅微球(MSN), 继续培养6 h后, 用荧光显微镜测定细胞胞吞二氧化硅纳米粒子后的荧光强度, 考察了不同流速下细胞对二氧化硅微球摄入量的影响. 结果表明, 在动态条件下, 细胞对二氧化硅微球的吞噬量明显下降, 当流速从0.022 mm/s 增加至0.74 mm/s时, 吞噬量从静态测得值的74.7%下降至7.1%.     

Characterization of gold/PMMA hybrid nanomaterials synthesized by hard X-ray synchrotron radiation

In this study,new types of hybrid gold poly(methyl methacrylate) (PMMA) nanomaterials are synthesized.Both PMMA spheres coated with gold nanoparticles and gold nanoparticles coated with PMMA can be synthesized using different ratios of HAuCl4 and MMA precursors,by exposing the mixtures to hard X-ray synchrotron radiation without the use of a reducing agent.According to the photochemical mechanism,gold nanoparticles will precipitate from a solution of HAuCl4 on exposure to synchrotron radiation,followed by the synthesis of PMMA by the polymerization of MMA monomers.These reactions can result in the formation of two different types of new hybrid nanomaterials.When a 1:1 volume ratio of HAuCl4 to MMA is used,we obtain PMMA spheres coated with gold nanoparticles.When a 10:1 ratio of HAuCl4 and MMA is used,we obtain gold nanoparticles coated with PMMA.The hybrid gold/PMMA nanostructures are characterized by transmission electron microscopy,elemental analysis,dynamic-light scattering analysis,gel permeation chromatography and Raman spectroscopy.The hybrid nanomateriais have potential application in the fields of biosensors and drug delivery.