Solid-state thermolysis of [MnO]12 containing molecular clusters into novel MnO nano- and microparticles

Novel MnO nano- and microparticles including spherical nanoparticles and various micropolyhedra of pyramid-like, truncated rectangular pyramid-like, cubic, and rhombic dodecahedral particles, were controllably synthesized via solid-state thermolysis of inorganic core containing molecular clusters [Mn₁₂O₁₂(O₂CR)₁₆(H₂O)₄] (R=C₆H₅, CH₃, and C₆H₅OCH₂) in a conventional horizontal tube furnace. Among them, pyramid-like, truncated rectangular pyramid-like, cubic, and rhombic dodecahedral MnO submicroscale particles were reported for the first time. The products were characterized by XRD, XPS, Raman spectrum, SEM, EDX, TEM and HRTEM. During the reaction process, thermolysis temperature, reaction time, and different molecular clusters {Mn12} precursors with different organic ligands as well play important roles in determining the sizes and shapes of the final products. The formed MnO nanospheres from [Mn₁₂O₁₂(O₂CC₆H₅)₁₆(H₂O)₄] at 400 °C for 10 h exhibited weak ferromagnetic behavior at low temperature which may be due to the size-effect of nanomaterials. Furthermore, the possible formation mechanism was also discussed.     

Effect of layer structures of gold nanoparticle films on surface enhanced Raman scattering

Using a method of collecting nanoparticles at a water/hexane interface in a close-packed monolayer film and transferring such films onto a solid substrate, three-dimensional multilayer films of nanoparticles were formed. The packed nanoparticles were gold nanospheres (NS) with a 26 nm diameter or gold nanorods (NR) with a 31 nm diameter and 74 nm length. We investigated variations in the surface enhanced Raman scattering (SERS) intensities from such nanoparticle films as the layer compositions were changed. The films stacked with NR layers generated much higher SERS intensity than those of NS layers. The SERS intensities from both kinds of films increased as the number of layers were increased. However, when the NR layer and NS layer were stacked alternately, SERS intensity varied in a zigzag fashion. It was found that the structure of top layer plays a distinguishable role in generating strong SERS enhancement while the lower layers contribute to SERS with less dependency on structures. Interlayer coupling as well as intralayer coupling was considered in order to explain the observations.     

Time-resolved luminescent lateral flow assay technology

We here report a detection technology that integrates highly sensitive time-resolved luminescence technique into lateral flow assay platform to achieve excellent detection performance with low cost. We have developed very bright, surface-functionalized and mono-dispersed phosphorescent nanoparticles of long lifetime under ambient conditions. The phosphorescent nanoparticles have been used to conjugate with monoclonal antibody for C-reactive protein (CRP), an inflammatory biomarker. Lateral flow immunoassay devices have been developed using the conjugate for highly sensitive detection of CRP. The CRP assay can achieve a detection sensitivity of <0.2 ng mL⁻¹ in serum with a linear response from 0.2 to 200 ng mL⁻¹ CRP. We have also developed a low cost time-resolved luminescence reader for the lateral flow immunoassay (LFIA) devices. The reader does not use expensive band pass filter and still provide very low detection background and high detection sensitivity on solid substrates such as nitrocellulose membranes. The reader can detect less than 2.5 ng phosphorescent particles captured on a nitrocellulose membrane strip with more than three orders of magnitude linear detection dynamic range. The technology should find a number of applications, ranging from clinical diagnostics, detection of chemical and biological warfare agents, to food and environmental monitoring.     

Ferrofluids Containing Fe3O4 Nanoparticles in Solidified Photoresist Carrier

Ferrofluids, formed by magnetic nanoparticles uniformly dispersed in a liquid carrier, respond to an external magnetic field, which enable the fluid's position by applying a magnetic field. Here, ferrofluids composed of Fe₃O₄ nanoparticles with oleic acid and oleylamine as the surfactant and photoresist, respectively, were prepared. Under an external magnetic field, the movement and the position of ferrofluids and the injection of the fluids into complex shapes were easily achieved. The ferrofluid surfaces were distorted under the magnetic field, and the surface structue was controlled by the applied field strength. Using a photoresist as the liquid carrier, it was possible to solidify the ferrofluids by UV irradiation. The shape and the position of the solid superparamagnetic nanoparticles/polymer composites were also determined by the external magnetic field.     

Preparation of Functionalized Fe3O4@SiO2 Magnetic Nanoparticles for Monoclonal Antibody Purification

Magnetic Fe₃O₄@SiO₂ nanoparticles with superparamagnetic properties were prepared via a reverse mi-croemulsion method at room temperature. The as-prepared samples were characterized by transmission electron mi-croscopy(TEM), X-ray diffractometry(XRD), and vibrating sample magnetometry(VSM). The Fe₃O₄@SiO₂ nanoparticles were modified by (3-aminopropyl)triethoxysilane(APTES) and subsequently activated by glutaraldehyde(Glu). Protein A was successfully immobilized covalently onto the Glu activated Fe₃O₄@SiO₂ nanoparticles. The adsorption capacity of the nanoparticles was determined on an ultraviolet spectrophotometer(UV) and approximately up to 203 mg/g of protein A could be uniformly immobilized onto the modified Fe₃O₄@SiO₂ magnetic beads. The core-shell of the Fe₃O₄@SiO₂ magnetic beads decorated with protein A showed a good binding capacity for the chime-ric anti-EGFR monoclonal antibody(anti-EGFR mAb). The purity of the anti-EGFR mAb was analyzed by virtue of HPLC. The protein A immobilized affinity beads provided a purity of about 95.4%.     

Numerical simulations on the formation of laser speckles with nanofluids

Our recent work revealed that speckles can be formed when nanofluids containing a proper volume fraction of nanoparticles are illuminated by a monochromatic laser beam [Qian M, Liu J, Yan M-S, Shen Z-H, Lu J, Ni XW, et al. Investigation on utilizing laser speckle velocimetry to measure the velocities of nanoparticles in nanofluids. Opt Express 2006; 14: 7559–66]. In this paper, two different physical models are established to figure out the speckle-formation mechanism. The photon–nanoparticle-collision model emphasizes the random collisions between photons and nanoparticles, and Monte Carlo method is used to simulate how the incident photons move in the vessel containing nanofluids. However, in the electric-dipole model, each illuminated nanoparticle becomes an electric dipole and sends out scattering lights, and the coherent addition of the scattering lights from nanoparticles is numerically calculated. Finally, from the numerical results, the speckle-formation mechanism is figured out.     

Preparation and characterization of copper(II) tetrasulfonated phthalocyanine nanoparticles formed by laser ablation in poor solvents

Laser irradiation of copper(II) tetrasulfonated phthalocyanine (CuTsPc) microcrystals in poor organic solvents such as methanol, 2-methyl-2-propanol, ethanol, tetrahydrofuran, and acetone has produced CuTsPc nanoparticles with 15–112 nm in diameter. Field emission scanning electron microscopy (FESEM) images have shown the formation of CuTsPc nanoparticles in poor organic solvents used in this work. The mean diameters of CuTsPc nanoparticles obtained from transmission electron microscopy (TEM) images in methanol, 2-methyl-2-propanol, ethanol, tetrahydrofuran, and acetone were determined to be 26, 36, 35, 86, and 78 nm, respectively. A correlation between the size of CuTsPc nanoparticles and a solvent polarity could be found in this work.     

Characterization of particles made by desolvation of monodisperse microdroplets of analyte solutions and particle suspensions for nanoparticle calibration in inductively coupled plasma spectrometry

Particles produced by low-temperature desolvation of monodisperse microdroplets of analyte standard solution and nanoparticle suspensions in argon were collected on Si-wafers and studied applying scanning electron microscopy and X-ray microprobe techniques. At desolvation temperatures of about 150 °C, the particles from standard solutions are most often spherical and solid with good reproducibility and the analyte elements together with the unavoidable accompanying elements from trace contamination seem to be homogeneously distributed in the particles. However, there are surprising exceptions, particularly at higher temperatures, where analyte elements are separated in the particle by reduction or crystallization, as shown with Au and Ca standard solutions, respectively. Drying droplets of a diluted suspension of 250 nm gold particles at 200 °C revealed another interesting result, the production of relatively stable concave balloons of ∼ 3 µm in diameter including the Au particles. The balloon sheath was formed of compounds made of the contaminant elements in the suspension. The morphology of the particles is discussed in consideration of the Peclet number, the ratio of evaporation rate to analyte diffusion coefficient. The consequences of particle size and morphology for calibration purposes in nanoparticle characterization by ICP spectrometry are discussed.     

Preparation and evaluation of solid-phase microextraction fibres based on functionalized latex nanoparticle coatings for trace analysis of inorganic anions

The use of a functionalized latex nanoparticle coating as a new sorbent phase for solid-phase microextraction (SPME) was examined. By means of electrostatic absorption onto ionized silanol groups, a fused-silica rod was coated with polymeric nanoparticles functionalized with quaternary ammonium groups. Optimum conditions for the preparation of the coated fibre are presented. The fibre was used for the extraction of a mixture of seven anions from water samples which are analysed by coupling the SPME fibre to an ion chromatographic system via a special interface. The results obtained proved the suitability of this novel coating as a new SPME fibre. A linear calibration for the target analytes was achieved over the concentration range from 5 μg L⁻¹ to 5 mg L⁻¹ (r² > 0.988), while limits of detection for these ions were all below 3.7 μg L⁻¹ (S/N = 3). The reproducibility of a single fibre (n = 4) under similar conditions was between 7 and 12%, while the fibre to fibre reproducibility (n = 5) was between 8.9 and 14%.     

Near-field optical characterization of interacting and non-interacting gold nanoparticles embedded in a silica thin film

By near-field optics, we characterized the local optical properties of clusters of gold nanoparticles randomly distributed under a 50 nm-thick SiO₂ thin film. A local field enhancement is visible above isolated clusters. A few hundred nanometers away from them, we observed a polarization-dependent pattern with elliptical lobes oriented in the incident polarization direction. A simple simulation shows that the observed near-field images can be represented by the sum of the field of an oscillating dipole and the incident field. When the cluster density is larger, the measured near-field images show numerous bright and dark spots. The position of the bright spots does not necessarily coincide with the gold clusters showing the presence of coupling effects between them.