Study on the anodic reaction of Ni in an alkaline solution by transient pH detection based on scanning electrochemical microscopy (SECM)

The anodic reaction of Ni in an alkaline solution was studied by the tip–substrate voltammetry mode of scanning electrochemical microscopy (SECM) and cyclic voltammetry (CV). A platinum microdisc electrode was selected as the tip electrode, which functioned as a pH sensor with transient response capability. The pH value of the solution near the Ni electrode surface varied while the Ni substrate oxidation reaction occurred, and the pH variation could be detected by the tip faradic current. The cyclic voltammogram results showed that two types of hydroxides: i.e. α‐Ni(OH)₂ and β‐Ni(OH)₂ were formed during Ni oxidation in the lower potential region. In the proceedings of α‐Ni(OH)₂ → γ‐NiOOH and β‐Ni(OH)₂ → β‐NiOOH, the process of OH^? concentration decrease in the solution was ahead and behind of electron transfer in the solid phase, respectively. These results indicate that the OH^? adsorption process occurs as an elementary step in the former reaction and the H⁺ diffusion process from the inner to the outer layer of the solid phase occurs as a subsequent step in the latter reaction. The results also revealed that the oxide film on the Ni surface has a two‐layer structure. The real potential of the oxygen evolution reaction (OER) on the Ni surface with different cycles is also analyzed in the paper. Copyright © 2007 John Wiley & Sons, Ltd.     

The influence of the sacrificial anode nature on the mechanism of electrochemical arylation and alkylation of white phosphorus

The material of the sacrificial anode has a substantial effect on the nature and yield of the target products of electrochemical phosphorylation of organic halides by white phosphorus in the presence of the nickel complexes with 2,2"-bipyridine. The use of the zinc anode results in the products with tricoordinated phosphorus, viz., triorganylphosphines, the reaction on the aluminum anode affords triorganylphosphine oxides, and the presence of Mg²⁺ ions in the reaction mixture provides the transformation of white phosphorus into cyclic phosphines (PhP)₅.     

金属酞菁化合物在TiO2表面的分散研究

Dispersion of copper(Ⅱ) phthalocyanine (CuPc), copper(Ⅱ) phthalocyaninesulfonate (CuPcS) and cobalt(Ⅱ)phthalocyaninetetrasulfonate (CoPcTS) on the surface of titanium dioxide was investigated by XRD, XPS, FT-IR and UV-Vis techniques. Results show that interaction between CuPc and TiO2 was very weak and CuPc was difficult to disperse on the surface of the support. While partly sulfurized CuPcS could be dispersed on the surface of support through sulfo-groups and its dispersion capacity was determined to be 0.085 g CuPcS/g TiO2. Completely sulfurlzed CoPcTS could also be dispersed on the surface of TiO2 as a monolayer and its dispersion capacity was 0.12 g CoPcTS/g TiO2. Interactions of the sulfo-groups as well as the electrons of CoPcTS with the surface of TiO2 could be evidenced by FT-IR characterization. Therefore, it was suggested that CoPcTS molecules be adsorbed on the surface of TiO2 in a flat-lying mode while CuPcS in a slanting one. UV-Vis spectra show that the dispersed CuPcS and CoPcTS molecules exist in both forms of monomers and dimers.     

RESEARCH ON CATALYSTS OF ANTI-CARBON DEPOSITION FOR CH_4 REFORMING WITH CO_2

IntroductionMethaneandcarbondioxidearetWomaincompositionsforthegreenhouseeffectandtheworldglobewanningll].ItisbeneficialtoourlivingenviroIUnenttocontrolthereleaseofthesetwogases.Theconversionofmethanetothecommonfeedstocksynthesisgas(carbonmonoxideandhydro…     

5,15-二(对-取代苯基)八烷基卟啉及其金属配合物的合成

本文报道了五种5,15-二(对-取代苯基)-2,8,12,18-四乙基-3,7,13,17-四甲基卟啉(Ⅱa—Ⅱe)和五种5,15-二(对-取代苯基)-2,3,7,8,12,13,17,18-八甲基卟啉(Ⅰa—Ⅰe)以及它们的铜、铁、镍金属配合物的合成。这些化合物的结构均经元素分析、UV、~1HNMR和MS鉴定。芳环上不同取代基对卟啉成环反应有一定影响,拉电子基团有利于反应。其顺序如下:NO_2>H>CH_3>OCH_3>N(CH_3)_2。     

Ni2（OEt）2／SiO2催化二氧化碳与丙烯直接合成甲基丙烯酸的研究

 采用表面改性法制备了负载型Ni2（OEt）2／SiO2双核金属乙氧基配合物催化剂，利用示差量热、红外光谱和微反技术对催化剂的表面结构、热稳定性、化学吸附性质和催化活性进行了研究．结果表明，负载型双核金属乙氧基配合物Ni2（OEt）2／SiO2中的Ni2＋与载体SiO2表面的O2－以双齿配位形式键合；二氧化碳在催化剂表面存在桥式吸附态和碳酸单乙酯基物种两种吸附态，丙烯则只有一种分子吸附态；在适宜的反应条件下，二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂上的反应产物主要是甲基丙烯酸．根据实验结果，提出了二氧化碳和丙烯在Ni2（OEt）2／SiO2催化剂表面的反应机理，反应物分子共吸附于催化剂表面同一活性单元上，羧酸根和丙烯解离吸附态的形成是反应顺利进行的关键步骤．     

四(α-高歧化度烷氧基)酞菁合成关键步骤的研究

烷氧基邻苯二腈是酞菁合成的重要中间体,但高歧化度烷氧基邻苯二腈的合成由于副产物多,产率低下而成为此类酞菁应用的"瓶颈".文中对反应副产物进行了分离纯化,并利用红外、气质联用、1HMR和元素分析等测试手段对其进行了表征.且根据测试数据推导出了副产物结构式为1,2,1'2' 四腈基 3,3' 二苯基醚.这一副反应机制的阐明,对于寻求对主反应有利的条件,具有重要的意义.     

酞菁,酞菁铁及酞菁镍电子性质的理论研究

以双片层分子为晶体单胞模型，用量子化学具有晶体轨道的ＥＨＭＯ方法研究了酞菁、酞菁铁及酞菁镍的导电性能，讨论了碘掺杂对它的影响。计算结果表明：由于碘掺杂后，系体构型发生了较大的变化，层间作用加强，从而前述几种晶体的能隙均显著降低，电导率大幅度提高。     

铑（Ⅲ）与2—（3,5—二氯—2—吡啶偶氮）—5—二甲氨基苯胺络合物的催化氢波

本文提出一种新的测定铑的催化氢波体系.先使Rh(Ⅲ)与3,5-diCl-PADMA在HAc-NaAc缓冲溶液中生成稳定的络合物,再以适量HclO_4将溶液酸化后进行极谱测定。利用正交试验法确定体系的最佳分析条件为:0.05 mol/L pH5.0的HAc-NaAc,1.6×10~(-5)mol/L3,5-diCl-PADMA,沸水浴加热15min.,4.4 mol/L HCIO4酸化。在此条件下的线性范围为1.9×10~(-11)～3.9×10~(-9)mol/L,检出限达5.8×10~(-12)mol/L。大量Cu(Ⅱ)、Ni(Ⅱ)、Fe(Ⅲ)及Co(Ⅱ)对体系的干扰可用EDTA消除。研究了催化波的性质,表明该波为Rh(Ⅲ)与3,5-diClPADMA络合物的催化氢波。     

Progress on phthalocyanine-conjugated Ag and Au nanoparticles: Synthesis,characterization, and photo-physicochemical properties

Phthalocyanine (Pc) complexes are an important class of dyes with numerous (e.g., biological, photophysical, and analytical) applications. Among the methods used to improve the properties of these complexes, one should mention the introduction of different substituents, variation of the central metal ion, ligand exchange, and conjugation to nanomaterials (e.g., carbon-based nanomaterials and metal nanoparticles (NPs)). This work briefly reviews Pc complex conjugation to Ag and Au NPs, highlights the different NP shapes, and discusses the diversity of conjugation approaches. Moreover, the use of UV–Vis spectroscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, atomic force microscopy, dynamic light scattering and Fourier transform infrared spectroscopy to characterize Pc-NP hybrids is summarized. The effect of conjugation on Pc photo-physicochemical properties (fluorescence, singlet oxygen generation, triplet state formation, and optical limiting behavior) is discussed, and future perspectives for the synthesis and applications of new hybrids are provided.