Surface modification of γ-alumina membranes by silane coupling for CO2 separation

Top layers of γ-Al₂O₃ composite membranes have been modified by the silane coupling technique using phenyltriethoxysilane for improving the separation factor of CO₂ to N₂. The separation efficiency of the modified membranes was strongly dependent upon the hydroxylation tendency of the support materials and the amount of the special functional group (i.e. phenyl radical) which was coupled onto a top layer. The separation factor through the TiO₂ supported γ-Al₂O₃ membrane was found to be fairly enhanced by silane coupling, but in case of the -Al₂O₃ supported membrane was not. The CO₂/N₂ separation factor through the modified γ-Al₂O₃/TiO₂ composite membrane is 1.7 at 90°C and ΔP = 2 × 10⁵ Pa for the binary mixture containing 50 vol% CO₂. The separation factor is proportional to the CO₂ concentration in the gas mixture, and the modified membrane is stable up to 100°C. The main mechanism of the CO₂ transport through the modified γ-Al₂O₃ layer is known to be a surface diffusion.     

Lead ion selective PVC membrane electrode based on 5,5'-dithiobis-(2-nitrobenzoic acid)

A PVC membrane electrode for lead ions based on 5,5′-dithiobis-(2-nitrobenzoic acid) as membrane carrier was prepared. The electrode exhibits a Nernstian response for Pb²⁺ over a wide concentration range (1.0×10⁻²–4.0×10⁻⁶ M). It has a relatively fast response time and can be used for at least 3 months without any divergence in potentials. The proposed electrode revealed good selectivities for Pb²⁺ over a wide variety of other metal ions and could be used in a pH range of 2.0–7.0. It was used as an indicator electrode in potentiometric titration of lead ions and in direct determination of lead in water samples.     

Utilization of maltodextrin based enantioselective, potentiometric membrane electrodes for the enantioselective assay of S-perindopril

Enantioselective, potentiometric membrane electrodes (EPMEs) based on carbon paste impregnated with different maltodextrins {dextrose equivalent (DE) 4.0-7.0 (I), 13.0-17.0 (II) and 16.5-19.5 (III)} as chiral selectors for the assay of S-perindopril is described. The proposed electrodes could be reliably employed in the assay of S-perindopril raw material and from its pharmaceutical formulation, Coversyl^® tablets. The electrode based on maltodextrin (I) showed the best enantioselectivity and time-stability. The surfaces of the electrodes are easily renewable by simply polishing on an alumina paper.     

Pervaporation separation of alkane/thiophene mixtures with PDMS membrane

Worldwide concerns over environment have stimulated increasing interest both in academic and industry for deep desulfurization of gasoline. Polydimethylsiloxane (PDMS) composite membrane was used to separate the binary and multicomponent alkane/thiophene mixtures by pervaporation. Effect of carbon number and concentration of alkane, and of feed temperature, on the separation efficiency of alkane/thiophene mixtures was investigated experimentally. Experimental results of binary mixtures indicated that the total fluxes for different alkane/thiophene mixtures decrease with increase of carbon number in the alkanes. Corresponding activation energies of permeation for alkanes in PDMS membrane increase with increase of carbon number in the alkanes. Differences of molecular size and structure of the alkanes lead to various selectivities thereof within PDMS membrane. In addition, the permeability and activation energy of thiophene in various systems differ from each other due to coupling effect which should be taken into consideration when dealing with multicomponent systems. Pervaporation results of ternary systems indicated that, the increase of content of lighter alkane in feed would result in a larger total flux, but a smaller selectivity to thiophene simultaneously. A quaternary system, the mixture of n-heptane, n-octane, n-nonane and thiophene, was employed to simulate the desulfurization process of gasoline. With the membrane having a PDMS layer of 11 μm, the total flux was measured to be about 1.65 kg/m² h, with the corresponding enrichment factor of thiophene 3.9 at 30 °C.     

A Novel PVC‐Membrane‐Coated Graphite Sensor Based on an Anthraquinone Derivative Membrane for the Determination of Lead

A highly selective membrane electrode for the determination of ultratrace amounts of lead was prepared. The PVC membrane electrode based on 2‐(2‐ethanoloxymethyl)‐1‐hydroxy‐9,10‐anthraquinone (AQ), directly coated on graphite, exhibits a good Nernstian response for Pb(II) ions over a very wide concentration range (1.0×10^?7–1.0×10^?2 M) with a limit of detection of 8.0×10^?8 M. It has a fast response time of ca. 10 s and can be used over a period 2 months with good reproducibility (SD=±0.2 mV). The electrode revealed a very good selectivity respect to common alkali, alkaline earth, transition and heavy metal ions and could be used in the pH range of 3.5–6.8. It was used as an indicator electrode in potentiometric titration of lead ions with chromate and oxalate, and in indirect determination of lead in spring water samples.     

Synthesis of model linear tetrablock quaterpolymers and pentablock quintopolymers of ethylene oxide

Multiblock copolymers of ethylene oxide, with four and five different blocks, were synthesized by the sequential anionic polymerization of styrene, isoprene, 2-vinyl pyridine, t-butyl methacrylate, and ethylene oxide with benzyl potassium as an initiator. The monomer sequence was based on the relative nucleophilicity of the active centers. Characterization of the multiblock copolymers by size exclusion chromatography (with refractive-index and UV detectors), membrane osmometry, and NMR spectroscopy confirmed that benzyl potassium is an efficient initiator for the synthesis of well-defined multiblock multicomponent copolymers of ethylene oxide. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2166–2170, 2002     

Developments on carbon dioxide reduction: Their promise,achievements, and challenges

CO₂ reduction processes continue to be developed for electrosynthesis, energy storage applications, and environmental remediation. A number of promising materials have shown high activity and selectivity to target reduction products. However, the progress has been mainly at a small laboratory scale, and the technical challenges of large scale CO₂ reduction have not been considered adequately. This review covers recent advancements in catalyst materials and cell designs. The leading materials for CO₂ reduction to a number of useful products are presented with their corresponding cell and reactor designs. The latest efforts to progress to industrially relevant scales are discussed, along with the challenges that must be met for carbon dioxide reduction to be a viable route for mass scale production.     

SYNTHESIS AND PROPERTIES OF SULFONATED POLY（ARYLENE ETHER） CONTAINING TRIPHENYL METHANE MOIETIES FROM ISOCYNATE MASKED BISPHENOL

A novel sulfonated poly（arylene ether） containing triphenylmethane moieties was synthesized by the sulfonation of a designed parent polymer using chlorosulfonic acid as sulfonation agent. The sulfonation took place at the para position of the pendant phenyl rings because of the specially designed parent polymer. The position and degree of sulfonation were characterized by ^1H-NMR and elemental analysis. The sulfonated polymers are highly soluble in common organic solvents, such as dimethylsulfoxide, N,N＇-dimethylacetamide, dimethylformamide, ethylene glycol monomethyl ether, and can be readily cast into tough and smooth films from solutions. The films showed good thermal and hydrolysis stabilities. Moreover, Fenton＇s reagent test revealed that the films exhibited superior stability to oxidation. The proton conductivities of the films were comparable with Nation 117 under same conditions. The membrane electrode assembly （MEA） prepared with the asmade film （706 EW, 100 μm dry thickness） shows better cell performance than Nation 115-MEA in the whole current density range.     

Potentiometric determination of diclofenac in pharmaceutical formulation by membrane electrode based on ion associate with base dye

The characteristics,performance and application of membrane electrode based on ion associate of diclofenac with base dye Safranine T are described.The electrode response to diclofenac has the sensitivity of 47±1.0 mV decade~(-1)over the range of 5×10~(-5)to 5×10~(-2)mol/L at pH 6-12,and the detection limit of 3.2×10~(-5)mol/L.The electrode is easy assembled at a relatively low cost has fast response time(2-4 s)and can be used for a period up to 3.5 months without any considerable divergence in potential.The proposed sensor displayed good selectivity for diclofenac in the presence of different substances.It was used to determine diclofenac in pharmaceuticals by means of the standard addition method.     

Flow through Porous Media XVI: Electrokinetic Transport Coefficients of Aqueous Solutions of Mercuric Chloride and Glycine through a Sintered Disc Impregnated with a Cellulose Acetate Membrane under a Magnetic Field

The effect of the magnetic field on the electrokinetic transport coefficients (permeability coefficient and electro-osmotic permeability coefficient) of water and aqueous solutions of mercuric chloride and glycine through a sintered disc impregnated with cellulose acetate at different potentials, concentrations, and magnetic fields varying up to 21 kg/cm² are reported at 308.15 K. The phenomenological coefficients characterizing the electro-osmotic flow and the membrane characteristics are also estimated for the various solutions with the object of determining the efficiencies of electrokinetic energy conversion and ζ potential. The effect of magnetic field has been attributed to the molecular orientation of dipoles in solutions and to the change in the structure of the membrane.