The Comparison of the Orientation of Sodium 3-Hydroxy-2-Naphthalenecarboxylate in the Cavity of β-Cyclodextrin and Heptakis-(2,3,6-Tri-O-Methyl)-β-Cyclodextrin

Conformational analysis of inclusion complexes of sodium 3-hydroxy-2-naphthalenecarboxylate with -cyclodextrin and heptakis-(2,3,6-tri-o-methyl)--cyclodextrin in D₂O was investigated by 1D and 2D ¹HNMR measurements. The results show that part of the naphthyl group of sodium 3-hydroxy-2-naphthalenecarboxylate is situated in the 2,3-OH side of the -cyclodextrin cavity asymmetrically while the whole naphthyl group is included in the heptakis-(2,3,6-tri-o-methyl)--cyclodextrin cavity with the caboxylate and hydroxy group close to the 6-OCH₃ group.     

Dimeric water embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene

X-ray crystallographic analysis and density functional B3LYP/6-31G(d) calculation confirm that dimeric water is embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene and stabilized by hydrogen bondings of aromatic π?H₂O(1) and methyl?H₂O(2) in the dimeric water inclusion complex with binding energies of 1.4 and 0.9 kcal mol⁻¹ respectively, and by hydrogen bonding formed between H₂O(2) and four phenolic OH groups from an adjacent tetra-(p-tert-butyl)thiacalix[4]arene, with binding energy of 3.8-4.2 kcal mol⁻¹.     

New optically active organoantimony (BINASb) and bismuth (BINABi) compounds comprising a 1,1′-binaphthyl core: synthesis and their use in transition metal-catalyzed asymmetric hydrosilylation of ketones

Racemic 2,2′-bis[diarylstibano]-1,1′-binaphthyls [(±)-BINASbs] and 2,2′-bis[di(p-tolyl)bismuthano]-1,1′-binaphthyl [(±)-BINABi], which are the antimony and bismuth congeners of BINAP, have been prepared from 2,2′-dibromo-1,1′-binaphthyl (DBBN) via 2,2′-dilithio-1,1′-binaphthyl intermediate by treatment with the appropriate metal halides [(p-Tol)₂SbBr, Ph₂SbBr and (p-Tol)₂BiCl]. The optical resolution of the (±)-BINASbs could be achieved via the separation of a mixture of the diastereomeric Pd-complexes derived from the reaction of (±)-BINASbs with di-μ-chlorobis{(S)-2-[1-(dimethylamino)-ethyl]phenyl-C¹,N}dipalladium(II). Optically active (R)-BINASb and (R)-BINABi could be also obtained from optically active (R)-DBBN by the same procedure. The enantiopure BINASbs have been shown to be effective chiral ligands for the rhodium-catalyzed asymmetric hydrosilylation of ketones.     

Sol-gel ZrO2 coatings for chemical protection of stainless steel

ZrO₂ coatings deposited on 316 L stainless steel sheets were synthesized by sol-gel method using Zr(OC₃H₇)₄ as precursor and isopropanol, glacial acetic acid, and water as solvents for application with ultrasounds. Different solutions for dip-coating were prepared with compositions varying between 0.025 and 0.9 mol/dm³ of ZrO₂. X-ray diffraction shows that the films densified at 800°C are crystalline with a tetragonal structure. The thickness of the coatings varied from 0.35–0.75 m. The influence of the ZrO₂ coatings on the corrosion behavior of stainless steel substrates in aqueous NaCl was studied through potentiodynamic polarization curves at 1 mV/s. The values of the electrochemical parameters allow for an explanation of the role of the films in the increased resistance of steel against corrosion in moderately aggressive environments.     

Thermal behavior of ternary Sm2Fe17Nx magnets

The Mössbauer spectra of Sm₂Fe₁₇N_x, prepared by the nitrogenation of Sm₂Fe₁₇ powders in an ammonia and hydrogen atmosphere, were observed at elevated temperatures to shed light on the thermal behavior of nitrogen in the compounds Sm₂Fe₁₇N_x. It was found that there were large differences in thermal behavior between the starting Sm₂Fe₁₇, crystalline Sm₂Fe₁₇N_x (x≈1.7) and amorphous Sm₂Fe₁₇N_x(x～7). The thermal decomposition behavior of Sm₂Fe₁₇N_3.2, developed as one of the most promising hard magnetic materials, was found to be different under different atmospheres.     

Specific heat on Sr<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and Sr<Subscript>2</Subscript>Ta<Subscript>2</Subscript>O<Subscript>7</Subscript>

Summary Specific heats on the single crystals of Sr₂Nb₂O₇, Sr₂Ta₂O₇ and (Sr_1-xBa_x)₂Nb₂O₇ were measured in a wide temperature range of 2-600 K. Heat anomalies of a λ-type were observed at the incommensurate phase transition of T_INC (=495 K) on Sr₂Nb₂O₇ and at the super-lattice phase transition of T_SL (=443 K) on Sr₂Ta₂O₇; the transition enthalpies and the transition entropies were estimated. Furthermore, a small heat anomaly was observed at the low temperature ferroelectric phase transition of T_LOW (=95 K) on Sr₂Nb₂O₇. The transition temperature T_LOW decreases with increasing Ba content x and it vanishes for samples of x>2%.     

Influence of pH on formation and stability of phosphatidylcholine/phosphatidylserine coatings in fused-silica capillaries

The effect of pH on the formation and stability of phospholipid coatings in fused-silica capillaries in electrophoresis was investigated. A liposome solution consisting of 3 mM of 80:20 mol% phosphatidylcholine/phosphatidylserine (PC/PS) in N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) (HEPES) buffer was used as coating material. The coating was prepared by a method described earlier and five steroids were used as neutral model analytes. First, the effect of pH of the coating solution on the formation and stability of phospholipid coatings was studied at pH 6.5-8.5. The pH of the background electrolyte (BGE) solution (HEPES) was either kept constant at pH 7.4 or made similar to the pH of the liposome coating solution. Results showed that attachment of the coating on the fused-silica wall mostly depends on the protonation of amines of the phospholipids and HEPES. The ability of the phospholipid coating to withstand changes in pH was then investigated by coating at pH 7.5 and separating steroids with acetic acid, 3-(cyclohexylamino)-1-propanesulfonic acid (CAPS), HEPES, or glycine BGE, adjusted to pH between 4.5 and 10.8. The results showed that with use of BGE solution at pH 10.8, the separation of steroids was not successful and the electroosmotic flow was high because of leakage of the phospholipid coating during preconditioning of the capillary with BGE solution. There was no phospholipid leakage with a BGE solution of pH 4.5, indicating that the protonated form of the functional groups of PS and HEPES participating in the attachment of the phospholipid coating to the capillary play an essential role in the success of the coating.     

Synthesis and reactivity of thieno[2,3-<Emphasis Type="Italic">b</Emphasis>]pyridine-2,3-diamines

It has been established that the interaction of N¹-(2-hydroxyphenylmethylthieno[2,3-b]pyrid-3-yl)arylamides with hydrazine hydrate leads to thieno[2,3-b]pyridine-2,3-diamines. It was shown that the reaction of the latter with acetylacetone and acetoacetic ester occurs regioselectively at the amino group in position 3 of the thiophene ring. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1400–1408, September, 2007.     

Oxidative cyclocondensation of cyclic thio-and selenoureas. 5. 2-Thioxothieno-and 2-thioxopyrido[2,3-<Emphasis Type="Italic">d</Emphasis>]pyrimidin-4-ones

A study was carried out on the oxidative cyclocondensation of 2-thioxothieno-and 2-thioxopyrido[2,3-d]pyrimidin-4-ones. The thiophene ring with excess π-electron density facilitates the reaction, while the pyridine ring with diminished π-electron density hinders it. 2-Thioxothieno-[2,3-d]pyridimin-4-ones were converted into previously unreported 7H,13H-[1,2,4]thiadiazolo-[3,2-b:5,4-b′]bis(thieno[2,3-d]pyridimine-7,13-diones). __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1424–1427, September, 2007.     

4-Hydroxy-2-quinolones 120. Synthesis and structure of ethyl 2-hydroxy-4-oxo-4H-pyrido-[1,2-a]pyrimidine-3-carboxylate

An improved method for the preparation and purification of ethyl 2-hydroxy-4-oxo-4H-pyrido[1,2-a]-pyrimidine-3-carboxylates is proposed. According to ¹H and ¹³C NMR spectroscopic data the synthesized compounds exist in DMSO solution in the 2-hydroxy-4-oxo form while in the crystal (at least for the case of the unsubstituted derivative) X-ray analysis shows that it occurs in the bipolar 2,4-dioxo form. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 864–876, June, 2007.