Actinide heterobimetallic oxides (Th, U): reduction studies

In our laboratories we have been studying the synthesis and reactivity of binary actinide and lanthanide intermetallic compounds. In this work, the air-oxidation of ThCu₂ and AnNi₂ (An = Th, U) was followed by thermogravimetry (TG) and the products were characterized by X-ray powder diffraction (XRD). The heterobimetallic oxides obtained are described by the formulas 2MO·ThO₂ (M = Cu, Ni) and 2NiO·UO₃. The thermogravimetric analysis under hydrogen of these heterobimetallic oxides show one mass loss for 2MO·ThO₂ and two mass losses for 2NiO·UO₃ over a wide range of temperature (293–1273 K). The characterization by XRD shows that the reduction products are 2M·ThO₂ (M = Cu, Ni) and 2Ni·UO₂, with all the actinides in the 4+ oxidation state. The actinide heterobimetallic oxides were described as copper or nickel supported catalysts.     

Samarium(II) iodide reduction of isoxazolidines

SmI₂ was used as reducing agent for the N-O bond cleavage in isoxazolidines. The procedure revealed is general and particularly useful for the transformation of 5-spirocyclopropane isoxazolidines to the corresponding β-aminocyclopropanols, a troublesome transformation with other known reagents.     

Promoting effect of sol-gel method and pre-treatment on the activity of SnO2/Al2O3 catalyst for NO reduction by propene

SnO₂/Al₂O₃ catalyst prepared by sol-gel method showed higher activity than those prepared by impregnation method, and their activity was significantly improved by pre-treatment in the reaction gas. The increased activity is closely related to the agglomeration of SnO₂ species and the re-exposure of Al₂O₃, which was previously covered by dispersed SnO₂ species. This revised version was published online in June 2006 with corrections to the Cover Date.     

Determination of total fluoride in HF/HNO3/H2SiF6 etch solutions by new potentiometric titration methods

In the photovoltaic industry the etching of silicon in HF/HNO₃ solutions is a decisive process for cleaning wafer surfaces or to produce certain surface morphologies like polishing or texturization. With regard to cost efficiency, a maximal utilisation of etch baths in combination with highest quality and accuracy is strived. To provide an etch bath control realised by a replenishment with concentrated acids the main constituents of these HF/HNO₃ etch solutions including the reaction product H₂SiF₆ have to be analysed. Two new methods for the determination of the total fluoride content in an acidic etch solution based on the precipitation titration with La(NO₃)₃ are presented within this paper. The first method bases on the proper choice of the reaction conditions, since free fluoride ions have to be liberated from HF and H₂SiF₆ at the same time to be detected by a fluoride ion-selective electrode (F-ISE). Therefore, the sample is adjusted to a pH of 8 for total cleavage of the SiF₆²⁻ anion and titrated in absence of buffers. In a second method, the titration with La(NO₃)₃ is followed by a change of the pH-value using a HF resistant glass-electrode. Both methods provide consistent values, whereas the analysis is fast and accurate, and thus, applicable for industrial process control.     

白藜芦醇的电化学行为及其与DNA的相互作用

采用电化学方法研究了白藜芦醇在pH=2~13的缓冲溶液中的电化学行为、抗氧化能力及其与DNA的相互作用. 研究结果表明， 在2.011的溶液中, 白藜芦醇产生的P4和P5波分别是其二价和三价阴离子的还原波. 在最佳实验条件下, 微分脉冲极谱图上IP3在8.0×10-8~2.0×10-6 mol/L范围内与白藜芦醇的浓度呈线性关系, 检出限为4×10-8 mol/L. 将该法用于中药虎杖中白藜芦醇含量的测定, 结果与高效液相色谱法一致.     

一种新型钛体系（Ⅳ）──α－酮酸钛酸酯与锂试剂的还原反应

一种新型钛体系（Ⅳ）──α－酮酸钛酸酯与锂试剂的还原反应段新方，尹承烈（北京师范大学化学系，北京，１００８７５）关键词加成，还原，钛酸酯，交换反应由于钛的优良调整作用，使得锂试剂ＲＬｉ不仅可以和α－酮酸钛酸酯ＡｒＣＯＣＯＯＴｉ（ＯＲ１）３中的酮发生加...     

Reaction and mass transfer effects in a catalytic monolith reactor

Zeolite-based monoliths (Cu/ZSM-5 on cordierite) are prepared and used to catalyze direct decomposition of nitrogen monoxide. Two-dimensional heterogeneous model is applied to describe the behavior of the monolith reactor, with the emphasis on the features introduced due to coupling of flow, mass transfer and chemical reaction. The proposed model has been verified by comparing computer simulation data with laboratory experimental data. It is shown that both inter- and intraphase diffusion limitations have to be considered when modeling complex reactor configuration, such as monolith reactors, especially when monolith with thicker catalytic layer are used at higher temperatures.     

Reduction of sulfoxides with boranes catalyzed by MoO2Cl2

The first example of an organic reduction with boranes catalyzed by a high valent oxo-complex is reported. The systems catecholborane/MoO₂Cl₂(H₂O)₂ (5 mol %) and BH₃·THF/MoO₂Cl₂ (5 mol %) proved to be very efficient for the reduction of sulfoxides to the corresponding sulfides in excellent yields.     

Pyrolytic synthesis and Eu→Eu reduction process of blue-emitting perovskite-type BaLiF3:Eu thin films

Perovskite-type barium lithium fluoride (BaLiF₃) was synthesized by pyrolysis of metal trifluoroacetates. The reaction temperature necessary for producing a single-phase material was found to be 600°C, which was lower than that for a conventional solid-state reaction or a melting method. Eu-doped BaLiF₃ was also prepared and characterized to examine the suitability of trifluoroacetates for precursors in synthesizing homogeneous complex metal fluoride materials. It was demonstrated that trivalent Eu³⁺, which was used as acetate for a starting material, was reduced to divalent Eu²⁺ in the pyrolysis process of BaLiF₃, as indicated by a broad blue emission due to an allowed 4f⁶5d→4f⁷ transition at 408 nm with a ultraviolet excitation at 254 nm. The concentration quenching of the blue emission occurred at 5 at% of Eu in BaLiF₃, indicating that Eu was homogeneously dispersed in the BaLiF₃ host lattice. Mechanisms of the formation and reduction process of BaLiF₃ were discussed based on pertinent chemical reactions.     

Anions from dihydro substituted ethyl benzoates and quinoline. New hydrogen donors for tin-free radical chemistry

The anions of substituted dihydro ethyl benzoates and quinoline are very good hydrogen donors to radicals in liquid ammonia and DMSO. With 4-substituted dihydro ethyl benzoates the rate of hydrogen transfer decreases and excellent yields of products are obtained by 6-exo ring closure reaction followed by reduction.