Morphology of Nylon-6 blends with styrenic polymers

The morphology of blends of styrenic polymers in a matrix of 75% Nylon-6 prepared in a Brabender Plasti-Corder was examined by scanning electron microscopy. Styrene/acrylonitrile copolymers (SAN) form smaller particles as the AN level increases owing to the corresponding decrease in the SAN–polyamide interfacial tension. Various styrenic polymers containing functional groups, maleic anhydride or oxazoline type, that can react with Nylon-6 during melt processing were added to the SAN phase which also led to a decrease in the particle size owing to the graft copolymer formed in situ. The effects of functional group type, amount of functional groups per chain, amount of functional polymer added, and the miscibility of the styrene/maleic anhydride (SMA) and SAN copolymers on the morphology of the styrenic phase in the Nylon-6 matrix are described. © 1992 John Wiley & Sons, Inc.     

CRYSTAL STRUCTURE AND MORPHOLOGY OF NASCENT SAMPLES OF SYMMETRIC AROMATIC POLYESTERS——Ⅱ. POLY(p-PHENYLENE 2,6-NAPHTHALATE)

Confined thin film melt polymerization (CTFMP) of naphthalene chloride/hydroquinone (NCMQ, 1/1, molar)mixtures at polymerization temperatures (T_p) below ca. 300℃ resulted in relatively thick, elongated crystals. Polymerizationof NC/HQ above 300℃ between glass yielded well-formed lamellar crystals ca. 100 A thick. Phase Ⅰ and Ⅱ [001] EDpatterns were obtained for all T_p, the relative amount of phase Ⅰ increasing with T_p. Polymerization of naphthalenedicarboxylic acid/hydroquinione diacetate 1/1 mixtures at high T_p also yielded lamellar crystals that "curled up" off of thesubstrate. When the high temperature CTFMP polymerization was conducted between mica, aggregates of lamellae on-edgedeveloped but epitaxial growth did not occur. Epitaxial growth of lamellae between mica could be obtained, however, byconfined thin film solution polymerization, with both of the latter samples yielding apparently related ED patterns from adifferent unit cell than phase Ⅰ or Ⅱ. Fiber patterns, obtained from sheared samples, indicated considerably greater crystaldisorder than in the nascent crystals. Refinement of the phase Ⅰ unit cell parameters, based on the [001] and [01 1] EDpatterns, with modeling based on Cerius~2, suggests a monoclinic phase Ⅰ unit cell with a = 7.76, b = 5.71, c = 14.99 A, α = γ= 90°, β= 99.7°, ρ = 1.47 g/cm~3, space group P12_1/al.     

Energy storage in Ce-doped LiCaAlF6 and LiSrAlF6 crystals

Absorption, emission and thermoluminescence (TL) of as-grown and X-irradiated pure and Ce-doped LiCaAlF₆ (LiCAF) and LiSrAlF₆ (LiSAF) crystals have been analyzed. It is shown that the energy storage is defined by the dissimilarity of basic matrix properties, intrinsic defect structure, preferred Ce³⁺ ion disposition and charge compensation defect type. This is the reason of higher colorability and TL efficiency of as-grown Ce:LiSAF compared to Ce:LiCAF. Pre-filling of ultra-deep traps leads to enormous increases in the TL response. Due to these properties Ce:LiSAF and Ce:LiCAF are promising thermoluminescent dosimetric materials.     

The synthesis mechanism of Ca3Al2O6 from soft mechanochemically activated precursors studied by time-resolved neutron diffraction up to 1000°C

The reaction pathway for the Ca₃Al₂O₆ formation up to 1300°C, from mechanochemically treated mixtures of amorphous aluminum hydroxide and CaCO₃, was studied in situ by differential thermal analysis, constant heating rate dilatometry and time-resolved neutron powder diffraction. The experiment was carried out, in an open system, on a sample with the nominal Ca₃Al₂O₆ stoichiometry. The results obtained by neutron diffractometry and thermal analysis were in good agreement with the data obtained by scanning electron microscopy and X-ray diffraction on heat-treated and-quenched samples. The synthesis path implied the formation of cryptocrystalline Al₂O₃, crystalline CaO, CaAl₂O₄ and Ca₁₂Al₁₄O₃₃ as transitory phases. Finally the nucleation and growth of the single phase Ca₃Al₂O₆ took place at 1300°C and exhibited porous structure due to CO₂ and H₂O release.     

Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.     

Coexisting antiferromagnetism and ferromagnetism in mechanically alloyed Fe-rich Fe–Ni alloys: implications regarding the Fe–Ni phase diagram below 400°C

Fe–Ni alloys below the Invar region with compositions Fe_100−xNi_x (x=21, 24, and 27 at%) were prepared by high-energy ball milling technique (mechanical alloying). The as-milled samples, characterized by X-ray diffraction and Mössbauer spectroscopy, contain a mixture of (BCC) and γ (FCC) phases, whereas the samples annealed at 650°C for 0.5 h show a single γ (FCC) phase displaying a single line Mössbauer spectrum at room temperature (RT). At low temperature, the Mössbauer spectra of annealed Fe₇₆Ni₂₄ and Fe₇₃Ni₂₇ alloys show the existence of a magnetically split pattern together with a broad singlet, which are ascribed to a high-moment ferromagnetic Ni-rich phase and a low-moment Fe-rich phase, respectively. The Fe-rich phase in annealed Fe₇₆Ni₂₄ alloy, which is paramagnetic at RT, undergoes antiferromagnetic ordering at 40 K, estimated from the dramatic line broadening of its spectrum, giving rise to a small hyperfine field (e.g. 2 T at 6 K). The coexistence of these phases is attributed to phase segregation occurring in these alloys as a result of enhanced atomic diffusion. The stability of these alloys towards martensitic (FCC→BCC) transformation at low temperatures is discussed in connection with the Fe–Ni phase diagram below 400°C.