CeO2(110)负载Au纳米颗粒催化CO+NOx反应的DFT+U研究

通过在位库伦校正的密度泛函理论（DFT+U）方法计算,我们研究了CO和NO_x分子在Au负载CeO₂（110）表面的吸附. 结果表明,CO在Au纳米颗粒的顶位有很强的吸附能,大约为1.2 eV,而NO在Au纳米颗粒上或者Au与CeO₂载体界面处都是弱吸附. 然而,当NO_x在界面处形成N₂O₂二聚体之后,通过断裂末端的N-O键能够有效地被降解. 纵观整个反应过程,第一步CO+N₂O₂的反应遵循了Langmuir-Hinshelwood机理,活化能只有0.4 eV,通过形成ONNOCO的中间物种最终产生N₂O和CO₂. 不同的是,第二步消除N₂O反应遵循了Eley-Rideal碰撞机理,需要相当高的能垒,约为1.8 eV. 通过进一步分析表明,稀土Ce元素独特的电子特性能够使电子从Au上转移并且局域到载体表面的Ce阳离子上,并且有助于形成带负电的N₂O₂分子. 而且Au纳米颗粒有很强的结构流动性,能够促进吸附的CO分子靠近界面处的N₂O₂并与之反应.     

乙二醇溶剂热合成的CeO2的可逆氧化还原性及CO2捕获性能

利用乙二醇的还原性,采用乙二醇溶剂热法制备了表面具有丰富氧空穴的CeO₂-GST纳米晶,对其进行了X射线衍射、透射电镜、X射线光电子能谱、原位H₂还原-O₂氧化循环和CO₂原位红外漫反射表征,并研究了其可逆氧化还原性及CO₂捕获性能. 结果表明,与CeO₂-nanorod和柠檬酸溶胶法合成的CeO₂-CA样品相比,CeO₂-GST纳米晶具有最好的可逆氧化还原性能和循环稳定性,同时在50 ℃下具有最好的CO₂吸附性能（149 μmol/g）. 利用原位红外漫反射光谱研究了CO₂在还原CeO₂表面的吸附情况,发现CO₂主要以双齿碳酸盐和桥连碳酸盐两种形式吸附在CeO₂表面,其中桥连碳酸盐物种不稳定,He吹扫可脱附. 此外,CO₂在CeO₂-nanorod上还会生成稳定的甲酸盐和单齿碳酸盐物种.     

Nd,Ce和La改性对Ni/SBA-15催化剂在CH4/CO2重整反应中性能的影响

以稀土金属Nd,Ce或La的氧化物为助剂,采用β-环糊精浸渍法对Ni/SBA-15催化剂进行了改性,并运用X射线衍射、N₂吸附-脱附、程序升温还原和热重等手段考察了改性的催化剂在CO₂重整CH₄制合成气反应中的催化性能. 结果表明,Nd等稀土金属氧化物的添加对催化剂孔结构和晶相结构等性质影响不大,但可影响NiO的还原; Nd的添加使NiO与载体之间以Ni-Nd-O形式相互作用,促进了活性组分NiO的还原. 其中,Nd的添加量为5-10 wt%时所制备的催化剂在重整反应中的催化活性最高,且具有很强的抗积碳性能. La和Ce氧化物促进的Ni催化剂也表现出类似的性质和催化性能.     

CH3O和CO在Pd(111)表面偶联反应机理的理论研究

采用DMol³程序包中的GGA-PW91方法, 结合周期平板模型, 对CH₃O和CO在Pd(111)表面的反应进行了系统研究. 计算结果表明, 吸附在Pd(111)表面顶位上的CO分子中C原子所带正电荷最多, 容易与亲核试剂反应, 化学吸附能稍低, 有利于在表面上移动发生亲电插入反应; CH₃O 在Pd(111)表面fcc穴位吸附稳定, O原子上所带的负电荷较多, 易被亲电试剂进攻. 过渡态搜索表明, Pd(111)表面顶位上的CO与fcc穴位上CH₃O反应生成CH₃OOC的为放热反应, 反应能垒较低, 有利于偶联反应的进行.     

Facile Fabrication of Platinum Nanoparticles Supported on Nitrogen-doped Carbon Nanotubes and Their Catalytic Activity

A facile impregnation method under mild condition is designed for synthesis of highly dispersed Pt nanoparticles with a narrow size of 4-7 nm on nitrogen-doped carbon nanotubes （CNx）. CNx do not need any pre-surface modification due to the inherent chemical activity. The structure and nature of Pt/CNx were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and energy dispersive spectroscopy spectrum. All the experimental results revealed that the large amount of doped nitrogen atoms in CNx was virtually effective for capturing the Pt（IV） ions. The improved surface nitrogen functionalities and hydrophilicity contributed to the good dispersion and immobi- lization of Pt nanoparticles on the CNx surface. The Pt/CNx served as active and reusable catalysts in the hydrogenation of allyl alcohol. This could be attributed to high dispersion of Pt nanoparticles and stronger interaction between Pt and the supports, which prevented the Pt nanoparticles from aggregating into less active Pt black and from leaching as well.     

表面活性剂辅助共沉淀法制备Ni-Mg-Al固体碱催化剂用于CH_4-CO_2重整反应

采用表面活性剂辅助共沉淀法制备了Ni-Mg-Al固体碱催化剂并用于CH4-CO2重整反应,探讨了表面活性剂对Ni(111),Ni(200)晶面的择优取向作用,在800℃下比较了不同表面活性剂制备的催化剂的催化性能,详细考察了CTAB制备的催化剂CB-LDO在不同反应温度下的催化活性和稳定性.采用红外光谱、X射线衍射、程序升温还原、X射线光电子能谱、高分辨透射电镜和程序升温氧化等表征手段分析了催化剂的活性、稳定性和失活原因.结果表明,四丙基氢氧化铵(TPAOH)促进Ni(200)的生长,而聚氧乙烯-聚氧丙烯-聚氧乙烯(P123)、聚乙烯吡咯烷酮(PVP)和十六烷基三甲基溴化铵(CTAB)抑制Ni(200)晶面的生长;Ni(200)的结晶程度对CH4的活化起到关键的作用,催化剂CB-LDO在高温下反应会发生晶型的转化,Ni(200)晶面由于反应过程中生成NiAl2O4尖晶石而得到缓慢释放,使催化剂的活性得以维持较高的水平.     

改性炭黑-LaMnO3复合材料的制备及其共价复合效应对氧还原性能的影响

以VulcanXC-72炭黑为载体,通过对炭载体石墨化处理和表面化学修饰,将其与化学沉淀法制备的纳米级LaMnO₃颗粒共混,再经特定温度下煅烧,制备出改性炭黑-LaMnO₃复合材料.X射线光电子能谱和热重分析表明,当煅烧温度在300℃时,炭载体与LaMnO₃纳米颗粒之间形成了大量C-O-M（M=La,Mn）化学键.扫描电子显微镜和高分辨透射电子显微镜分析发现,纯相LaMnO₃纳米颗粒主要呈现短棒、三支棒或竹节棒的形貌特征,炭载体则为具有完整石墨层的空心球结构,LaMnO₃均匀分散在炭载体上.在25℃,1mol/LNaOH溶液中的电化学测试结果表明,成分比（LaMnO₃：C）为2：3的复合材料具有很高的氧还原电催化活性,氧还原反应电子数为3.81,中间产物H₂O₂产率为9.5%,其活性接近商业Pt/C催化剂（E-TEK）.高的氧还原电催化活性主要归因于LaMnO₃纳米颗粒与炭载体之间形成了大量共价键.     

氮掺杂石墨烯的生长机理及其在乙苯选择性氧化中的应用

以热解氧化石墨烯材料为碳基底,分别使用有机氮源和无机氮源对其进行氮掺杂处理,制备了一系列氮掺杂石墨烯材料.采用透射电子显微镜、扫描电子显微镜、拉曼光谱和X射线光电子能谱等表征方法考察了氮掺杂石墨烯的生长机理.结果表明,随着制备过程中退火温度的改变,氮掺杂石墨烯中不同氮物种的含量有显著差别.这种差异是由不同氮物种化学环境的差异所导致的.所制备的含氮石墨烯材料对乙苯选择性氧化制苯乙酮反应均表现出优良的催化活性.其中,石墨氮的含量对于提高苯乙酮收率起到至关重要的作用.此外,通过氧化剂控制活化的方法可以消除过多的结构缺陷和过量氮掺杂对催化反应的不利影响,有效提升氮掺杂石墨烯的催化活性.     

Silver nanoparticle decorated poly(2-aminodiphenylamine) modified carbon paste electrode as a simple and efficient electrocatalyst for oxidation of formaldehyde

This work describes the promising activity of silver nanoparticles on the surface of a poly(2-amino diphenylamine) modified carbon paste electrode (CPE) towards formaldehyde oxidation. Electrodeposition of the conducting polymer film on the CPE was carried out using consecutive cyclic voltammetry in an aqueous solution of 2-aminodiphenylamine and HCl. Nitrogen groups in the polymer backbone had a Ag ion accumulating effect, allowing Ag nanoparticles to be electrochemically deposited on the surface of the electrode. The electrochemical and morphological characteristics of the modified electrode were investigated. The electro-oxidation of formaldehyde on the surface of electrode was studied using cyclic voltammetry and chronoamperometry in aqueous solution of 0.1 mol/L NaOH. The electro-oxidation onset potential was found to be around -0.4 V, which is unique in the literature. The effect of different concentrations of formaldehyde on the electrocatalytic activity of the modified electrode was investigated. Finally, the diffusion coefficient of formaldehyde in alkaline media was calculated to be 0.47 × 10^-6 cm²/s using chronoamperometry.     

Rubber-based substrates modified with carbon nanotubes inks to build flexible electrochemical sensors

The development of a solid-contact potentiometric sensor based on conducting rubbers using a carbon nanotubes ink is described here. Commercial rubbers are turned into conductive ones by a simple and versatile method, i.e. painting an aqueous dispersion of single-walled carbon nanotubes on the polymer surface. On this substrate, both the working ion-selective electrode and the reference electrode are built in order to form an integrated potentiometric cell. As a proof-of-principle, selective potassium electrodes are fully characterized giving comparable performances to conventional electrodes (sensitivity, selectivity, stability, linear range, limit of detection and reproducibility). As an application of the rubber-based electrodes, a bracelet was constructed to measure potassium levels in artificial sweat. Since rubbers are ubiquitous in our quotidian life, this approach offers great promise for the generation of chemical information through daily objects.