Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.     

Semi‐classical formulation of time‐dependent discrete variable representation method

In this article, we apply a novel time‐dependent discrete variable representation (TDDVR) method proposed by Barkakaty and Adhikari to investigate tunneling through an Eckart barrier. This semi‐classical method is theoretically rigorous and straightforward to implement. Among the TDDVR formulations, this report presents the first derivation of a rigorous form of quantum force (QF) for the present perspective. The validity of this semi‐classical approach is demanded based on the excellent agreement of the tunneling probability with the corresponding quantum results. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2004     

Conductance studies in amide-water mixtures. II. Sodium salts inN,N-dimethylformamide-water mixtures at 35°C

Conductance data for sodium nitrite, chloride, and acetate in water andN,N-dimethylformamide (DMF)-water mixtures (74.82D42.48) for the concentration range 0.001–0.04N, as well as the densities, viscosities, and dielectric constants of the solvent mixtures at 35°C, are reported. The data have been analyzed by the Fuoss (1975) equation. The existence of a maximum in the viscosity at a 13 mole ratio of DMF and water is indicated. The Walden products for all the three salts pass through a maximum while the equivalent conductances show a minimum with increasing DMF content. The maxima in the Walden product are attributed to the dehydration of ions by the cosolvent (DMF).Part I:Indian J. Chem. 14A, 1015 (1976).Deceased.     

Controllable growth of chains and grids from polyoxomolybdate building blocks linked by silver(I) dimers

Molecular growth processes utilizing a beta-octamolybdate synthon and {Ag2} dimers are described and the directing influence of "encapsulating" cations and coordinating solvent is also demonstrated. The growth of two 1D chains, (nBu4N)2n[Ag2Mo8O26]n (1) and (nBu4N)2n[Ag2Mo8O26(CH3CN)2]n (2), is achieved when nBu4N+ ions are used, and the diameter of the chains can be expanded by the coordination of CH3CN solvent (2). The formation of a type of gridlike structure in which 1D chains are crossed-over each other in alternatively packed layers is achieved in DMSO as the solvent; DMSO acts as a linking group to give (nBu4N)2n[Ag2Mo8O26(dmso)2]n (3), which, similar to 1 and 2, still incorporates the Bu4N+ ions that exert an "encapsulating" influence. However, in (HDMF)n[Ag3(Mo8O26)(dmf)4]n (4) the relatively bulky Bu4N+ ions are exchanged for protonated DMF cations, thereby allowing the chains to condense to a 2D array. The building block concept is further enforced by the isolation of a "monomeric" unit (Ph4P)2[Ag2Mo8O26(dmso)4] (5), which is isolated when the Ph4P+ ions are so "encapsulating" as to prevent aggregation of the {Ag-Mo8-Ag} building blocks. The nature of the AgAg dimers in each of the compounds 1-4 is examined by DFT calculations and the interplay between these Ag-Ag interactions and the structure types is described.     

Direct targeting of human plasma for matrix-assisted laser desorption/ionization and analysis of plasma proteins by time of flight-mass spectrometry

A method to analyze human plasma proteins without fractionation, directly applying a plasma-matrix mixture on the target plate of a matrix-assisted laser desorption/ionization-time of flight-mass spectrometer (MALDI-TOF-MS), has been described. Peaks of ionized plasma proteins could not be detected applying a mixture of an undiluted plasma sample and a matrix solution, but they appeared when the plasma was diluted before mixing with the matrix. Tenfold diluted plasma provided well-resolved protein peaks in the m/z range from 4000 to 30,000. The addition of a simple post-crystallization washing procedure performed on the target plate further improved the quality of mass spectra. We numbered 58 peaks in the range of 4-160 kDa and 32 out of which were assigned to the plasma protein species which have been reported. Especially high sensitivity and resolution were obtained in the region < 30 kDa, where multiple isoforms of apolipoprotein A-I, apolipoprotein A-II, apolipoprotein C-I, apolipoprotein C-II, apolipoprotein C-III, and transthyretin could be assigned. Various post-translational modifications are involved in the isoforms, e.g., proteolytic cleavage, glycosylation and chemical modifications. This method will become complementary with the present electrophoretic techniques, especially for the analysis of low-molecular-mass proteins.     

Quantitation in capillary electrophoresis-mass spectrometry

CE-MS has evolved into a strong alternative to LC-MS. Most of CE-MS applications deal with characterization and identification. However, quantitative aspects have gained importance in, e.g., pharmaceutical and biotechnological applications. Here we summarize and evaluate various methodological aspects in order to achieve sensitive and reproducible results. Similar to LC-MS, aspects of matrix influence on the electrospray process need to be carefully addressed when quantitative results are intended by CE-MS. Due to a more complicated coupling special emphasis needs to be put on the CE-MS interface. Generally linearity over more than three orders of magnitude can be achieved by CE-ESI-MS. Furthermore, a literature survey has been performed in order to give an overview over quantitative measurements performed by CE-MS. The precision can be doubled when changing from a structural related to an isotopically labeled internal standard. Thus a level of precision better than 5% RSD can be achieved.     

Synthesis and characterization of new optically active poly(amide‐imide)s containing epiclon and L‐methionine moieties in the main chain

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione] (1) was reacted with L ‐methionine (2) in acetic acid and the resulting imide‐acid 3 was obtained in high yield. The diacid chloride 4 was prepared from diacid derivative 3 by reaction with thionyl chloride. Thermostable poly(amide‐imide)s containing epiclon structure were synthesized by reacting of diacid chloride 4 with various aromatic diamines. Polymerization reaction was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.15 to 0.36 dl/g were obtained with high yield. All of the above polymers were fully characterized by ¹H‐NMR, FT‐IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.