The hole-pressure problem

There is a need to unify present hypotheses of the nature and role of the hole-pressure,p _e , and thus provide consolidation on which to base future research and understanding. This paper is intended to meet this need. Attention is directed towards the calculation ofp _e from the velocity and stress fields for viscoelastic fluids flowingacross rectangular holes. The constitutive models used are the Newtonian, Second-order and Maxwell models, for values of Reynolds number up to 10 and Weissenberg number up to 0.1.The numerical complications involved are studied through an investigation of the constituent parts ofp _e . Verification of present theory is then sought, from which justification may be derived for the estimation of elasticity fromp _e measurements. Attention is directed towards the predictions of Higashitani and Pritchard and the extension to the Tanner and Pipkin theory for Second-order fluids. The effects of variation of geometric dimensions and flow type uponp _e are also discussed.     

On column injection-dual channel analysis of essential oils

A system to analyze a complex mixture simultaneously on two different columns after one single on-column injection is described. The splitting device, the possibilities of component identification by searching in a data base for Kovats indices on two different polarity stationary phases, and a practical example of an essential oil analysis are presented.     

Direct electrochemical assay of glucose using boron-doped diamond electrodes

We report linear sweep and square wave voltammetric studies on glucose oxidation at boron-doped diamond (BDD) electrodes in an alkaline medium in efforts to evaluate the techniques for electrochemically assaying glucose. The bare BDD electrode showed good linear responses to glucose oxidation for a concentration range from 0.5 to 10 mM glucose, which well encompasses the physiological range of 3-8 mM. The BDD electrodes did not experience interferences from ascorbic acid or uric acid during glucose detection. This method, when applied to real blood samples, gave results similar to those obtained by a commercial glucose monitor.     

Optimization of selenium determination in plant samples by hydride generation and axial view inductively coupled plasma atomic emission spectrometry

The use of hydride generation coupled with axial view inductively couple plasma atomic emission spectrometry was presented for the determination of selenium in plant samples. The chemical factors affecting potentially the hydride generation efficiency (hydrochloric acid, sodium borohydride and sodium hydroxide concentrations) were assessed through investigation of chemical interference, accuracy and repeatability. The accuracy of measurements was not affected by elements present in high concentration in the plant matrix (K, Ca, Mg, and P). No interference was also observed with transition metals. Using a real sample (maize) with standard additions, decreases of recoveries were sometimes observed for 0.1% (m/v) NaOH, and attained 13.8% in the most unfavourable case. The final accuracy of the method was verified by using two certified reference materials: CRM 402 (white clover) and CRM 279 (sea lettuce). No statistically significant differences were obtained between the measured concentrations and the certified values. The optimized method was found sensitive (detection limit 0.15 μg l⁻¹), reliable and repeatable (R.S.D. between 1.3% and 4.0%).     

R12 hydrate formation kinetics based on laser light scattering technique

Gas hydrates are non-stoichiometric crystalline compounds of water with gas at a certain temperature and pressure. Compared to the thermodynamics of hydrate formation, our knowledge on the kinetics aspect is rather immature. It is well known that the kinetics of hydrate formation/dissociation plays an important role in many industrial cases, such as the exploitation of methane hydrate underground, the storage and transportation of natural gas in solid hydrate state, the inhibition of hydrate i…     

Solution and X-Ray Crystal Structures of the Di- and Tetra-allyl Ether of tert- utylcalix[4]arene

The di- and tetra-allyl ethers of tert-butylcalix[4]arene 1 and 2 have been prepared by alkylation of tert-butylcalix[4]arene with allyl bromide and K₂CO₃ using different reaction times. Solution ¹H NMR measurement of the di-allyl ether 1 and X-ray crystal structures of the complexes of 1 with chloroform (1a) or methanol (1b) indicate the cone conformation of 1 in which intramolecular hydrogen bonding can be maximized. The crystalline state conformers 1a and 1b are distorted in different grades depending on the solvent. While methanol is incorporated in the macrocycle, chloroform molecules do not occupy the cage. The solution ¹H NMR spectra of tetra-allyl ether 2 show the co-existence of the cone and partial cone conformation. The partial cone conformer of 2 was investigated by X-ray crystallography. In this compound hydrogen bonding is not existent. The conformer distribution is likely affected by steric and template effects.     

Open-access liquid chromatography/mass spectrometry in a drug discovery environment

The use of open-access mass spectrometry to monitor synthetic chemistry reactions, and also the integrity and purity of new chemical entities, has been a part of the medicinal chemist's tool-box for more than 5 years. Originally in our group at Wyeth Research there were two open-access methods available to the chemists, flow injection analysis (FIA) and liquid chromatography/mass spectrometry (LC/MS). The FIA method was approximately 3 min long, while the LC/MS method was approximately 20 min long (including an 8 min gradient). Within the first 2 years, the total number of open-access analyses increased by approximately 125%. It is interesting, however, that the number of LC/MS analyses increased by more than 285%. This is attributed to the fact that the chemists began using the LC/MS data to monitor reactions and also to check final product integrity and purity. In addition, the number of chemists performing parallel synthesis reactions has increased; thus, individual chemists can produce sample sets of up to 100 vials. This paper describes the implementation of new methodology, which accommodates the need for much faster run times and also the ability to acquire alternating positive and negative ion spectra within the same run. In addition, the instrument has been configured to e-mail the resulting processed data report to the submitting chemist. Several methods have been developed, including structure elucidation using in-source collision-induced dissociation (CID) and night-time analysis. The LC/MS methods for this system are described herein and are applicable to both industrial and academic synthetic chemistry optimization efforts.     

Development of the continuously variable volume reactor for flow injection analysis: Part 1. Design, capabilities and testing

A new apparatus for mixing sample and reagent in flow injection analysis (FIA) is described. The continuously variable volume reactor (CVVR) replaces the conventional mixing coil in a flow injection (FI) manifold to provide mixing and dilution. A linear actuator motor allows control of the chamber volume via LabVIEW software. The chamber volume can be incremented in steps of 1 μl over the range 68-1704 μl. In addition, the chamber has an integral variable-speed stirring unit that is also under computer control. Experiments were performed to evaluate the dispersion characteristics of this new device, evaluate the volume reproducibility, and understand the mixing characteristics. Use of the chamber is shown in the determination of iron(II) in pond water, and in NIST SRM 1643d with excellent results and a detection limit of 3.7 μg/l iron(II). Advantages of the CVVR and future research activities using the device are discussed.     

废弃线路板化学分析采样、制样及检测方法

介绍废弃线路板中有回收价值元素和有害物质分析的采样、制样及检测技术。样品经过分类采样、剪切破碎和高温灰化制样,采用样品全分析或副批混合样分析。通过提高称样量、多次测定求平均值的办法,火试金富集-重量法测定贵金属金、银。湿法王水溶解样品,碘量法测定主体元素铜。电感耦合等离子体发射光谱(ICP-AES)法测定其它杂质元素,被测元素质量浓度在0~10μg/mL范围内与光谱强度呈良好线性关系,相关系数均大于0.9998。测定结果的相对标准偏差小于10%(n=5),加标回收率为97.0%~102.5%。该方法简单、快速,有效地解决了线路板样品不均匀而难采样,以及硬度、韧性强制样难,金属易包裹难分解的技术瓶颈,测定结果准确,具有代表性。该方法适用于废弃线路板化学成分分析,其它废弃电子产品检测可参考此方法。     

GC-MS and GC-MS-MS analysis of a complex essential oil

Summary The alcoholic portion of avetiver oil (Bourbon), the gas chromatogram of which shows more than 100 components, was analyzed by combined GC-MS with different ionization methods. This enabled us to identify major components. The specificity of the method was improved by using combined gas chromatography-tandem mass spectrometry in the collision-activated-dissociation mode.